Difference between revisions of "HOWTO use the Laserjet 5si"

From i3Detroit
Jump to: navigation, search
Line 3: Line 3:
 
Drivers/Setup:
 
Drivers/Setup:
  
On a Mac, this is pretty straightforward. Just know that "port 9100" is the protocol to use, and if it gives you a choice between PS and HPGL, either should be fine.
+
==Mac==
 +
# Open "System Preferences" from the Apple menu
 +
# Open "Print and Scan"
 +
# Click the "+" button under the list of printers
 +
# Select the "IP" tab on the dialog that pops up
 +
# For protocol, select "HP Jetdirect - Socket"
 +
# For Address, enter "10.13.0.51"
 +
# Click "Add"
  
 +
Just know that "port 9100" is the protocol to use, and if it gives you a choice between PS and HPGL, either should be fine.
 +
 +
==Windows==
 
On a Windows box, you need to ignore the temptation to click "add a network printer", and instead, "add a local printer", then "create a new port", then  port type "standard tcp/ip port", then enter 10.13.0.51, and everything else should be sensible. If you are using Windows 7, there is no driver specifically for this printer.  There should be a built in driver for the model (Laserjet 5si MX), ether version (PS or non PS) will work.  If not, drivers for the Laserjet 4 should also work.
 
On a Windows box, you need to ignore the temptation to click "add a network printer", and instead, "add a local printer", then "create a new port", then  port type "standard tcp/ip port", then enter 10.13.0.51, and everything else should be sensible. If you are using Windows 7, there is no driver specifically for this printer.  There should be a built in driver for the model (Laserjet 5si MX), ether version (PS or non PS) will work.  If not, drivers for the Laserjet 4 should also work.
  
 +
==Linux==
 
On a Linux box, CUPS will have drivers for this printer.
 
On a Linux box, CUPS will have drivers for this printer.
  
 +
==Troubleshooting==
 
If things aren't printing, don't just randomly mash buttons on the printer. This is silly and likely to waste your time, and annoy the printer.  Instead, see http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=110&prodSeriesId=25478&prodTypeId=18972 and try to actually troubleshoot the issue.  
 
If things aren't printing, don't just randomly mash buttons on the printer. This is silly and likely to waste your time, and annoy the printer.  Instead, see http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=110&prodSeriesId=25478&prodTypeId=18972 and try to actually troubleshoot the issue.  
  

Revision as of 22:03, 13 September 2012

The printer is an HP Laserjet 5si MX. It has a built in JetDirect card, so there is no external networking equipment. The printer's IP address is 10.13.0.51

Drivers/Setup:

Contents

Mac

  1. Open "System Preferences" from the Apple menu
  2. Open "Print and Scan"
  3. Click the "+" button under the list of printers
  4. Select the "IP" tab on the dialog that pops up
  5. For protocol, select "HP Jetdirect - Socket"
  6. For Address, enter "10.13.0.51"
  7. Click "Add"

Just know that "port 9100" is the protocol to use, and if it gives you a choice between PS and HPGL, either should be fine.

Windows

On a Windows box, you need to ignore the temptation to click "add a network printer", and instead, "add a local printer", then "create a new port", then port type "standard tcp/ip port", then enter 10.13.0.51, and everything else should be sensible. If you are using Windows 7, there is no driver specifically for this printer. There should be a built in driver for the model (Laserjet 5si MX), ether version (PS or non PS) will work. If not, drivers for the Laserjet 4 should also work.

Linux

On a Linux box, CUPS will have drivers for this printer.

Troubleshooting

If things aren't printing, don't just randomly mash buttons on the printer. This is silly and likely to waste your time, and annoy the printer. Instead, see http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=110&prodSeriesId=25478&prodTypeId=18972 and try to actually troubleshoot the issue.

Please don't change the printer's IP address or configuration, it is not at fault. Seriously. Don't do it.

How to see the printer's status: Since the LCD on the printer itself is failing, you have to go through the web interface to see what it's trying to tell you. Hit http://10.13.0.51/ in your browser. Click on "Administration".