Difference between revisions of "Jointer"

From i3Detroit
Jump to: navigation, search
(Update + photo for the new jointer.)
m (Added link to video and made minor text changes.)
Line 1: Line 1:
 
{{Equipment  
 
{{Equipment  
 
| Name = Jointer
 
| Name = Jointer
| Intro = The jointer in the Wood Shop is currently being set up.  
+
| Intro = The jointer in the Wood Shop is currently being set up. A jointer is used to create a straight surface on a board. It can also be used to create a second straight surface at a right angle to the first straight surface.
 
| Owner = TBD, best contact person is Dave Alvarez
 
| Owner = TBD, best contact person is Dave Alvarez
| StorageLocation = The jointer should be stored in the wood shop. It is on a wheeled base so it can be rolled out to provide clearance for working with long boards.
+
| StorageLocation = The jointer should be stored in the Wood Shop. It is on a wheeled base so it can be rolled out to provide clearance for working with long boards.
 
| MakeModel = Acme CNC Yak Shaver - Model 5000 deluxe
 
| MakeModel = Acme CNC Yak Shaver - Model 5000 deluxe
 
| PartNumber =  
 
| PartNumber =  
Line 10: Line 10:
 
| Rules =
 
| Rules =
 
Put the rules that govern the use of this tool here.
 
Put the rules that govern the use of this tool here.
 +
* To prevent nicks on the blades, please check your board carefully and remove nails, screws, and any other metal bits.
 
* You can use any wiki formatting that you wish:
 
* You can use any wiki formatting that you wish:
 
* Like a bulleted list
 
* Like a bulleted list
Line 20: Line 21:
 
The power switch is located ...
 
The power switch is located ...
 
| MaintenanceInfo =
 
| MaintenanceInfo =
Does this thing need it's oil changed every 30 cycles?
+
Two critical adjustments need to be maintained on the jointer. The infeed and outfeed tables need to be parallel to within 0.001 in. or so, and the blades need to be 0.001 in. higher than the outfeed table.
People need to know!
+
 
| ToDos =  
 
| ToDos =  
 
What problems does this thing have, or are there improvements that would make it better.
 
What problems does this thing have, or are there improvements that would make it better.
 
| FAQs =
 
| FAQs =
 
# What is a jointer? Wikipedia has an excellent article on the [http://en.wikipedia.org/wiki/Jointer Jointer].
 
# What is a jointer? Wikipedia has an excellent article on the [http://en.wikipedia.org/wiki/Jointer Jointer].
 +
# Is there an online video that discusses jointer table/cutter alignment? Yes: [http://youtu.be/gO746cuRqV4 jointer adjustments]
 
}}
 
}}

Revision as of 07:49, 2 October 2011

Jointer

The jointer in the Wood Shop is currently being set up. A jointer is used to create a straight surface on a board. It can also be used to create a second straight surface at a right angle to the first straight surface.

Basic Info

  • Ownership: TBD, best contact person is Dave Alvarez
  • Location: The jointer should be stored in the Wood Shop. It is on a wheeled base so it can be rolled out to provide clearance for working with long boards.
  • What it looks like:

jointer photo

Manufacturer Information

  • Make/Model: Acme CNC Yak Shaver - Model 5000 deluxe
  • Part Number:

Documentation

not specified

Rules

Put the rules that govern the use of this tool here.

  • To prevent nicks on the blades, please check your board carefully and remove nails, screws, and any other metal bits.
  • You can use any wiki formatting that you wish:
  • Like a bulleted list

Instructions

Set the cutting depth

The depth adjustment ...

Turn it On

The power switch is located ...

Turn it Off

The power switch is located ...

Other References

not specified

Maintenance

Two critical adjustments need to be maintained on the jointer. The infeed and outfeed tables need to be parallel to within 0.001 in. or so, and the blades need to be 0.001 in. higher than the outfeed table.

Things that Need to be Done

What problems does this thing have, or are there improvements that would make it better.

FAQs

  1. What is a jointer? Wikipedia has an excellent article on the Jointer.
  2. Is there an online video that discusses jointer table/cutter alignment? Yes: jointer adjustments