Difference between revisions of "LaserCut"

From i3Detroit
Jump to: navigation, search
(Created page for LaserCut software)
 
m (Uploaded original LC5.3 manual and current working draft of new manual)
Line 2: Line 2:
 
LaserCut requires a "dongle" or "soft dog" to save or export files.  The software CD is located in the plastic bin on the shelves by the machine.
 
LaserCut requires a "dongle" or "soft dog" to save or export files.  The software CD is located in the plastic bin on the shelves by the machine.
  
[[File:Example.jpg|Here's the manual]] (not uploaded yet)
+
[[Media:LaserCut5UserManual.pdf | Here's the original manual]]
  
[[File:Example.jpg|Here's a working copy of a more user-friendly manual]] (not uploaded yet)
+
[[Media:LaserCut5AlternateManual.pdf | Here's a working copy of a more user-friendly manual]]

Revision as of 00:31, 19 November 2012

LaserCut 5.3 is the software that was provided with the Jinan G Weike machines. This software converts 2D layouts to an MOL file that can be used directly on the engraver. The user can either do simple layouts directly in this software, or import layouts / drawings that were made in other software such as Adobe Illustrator, Inkscape, AutoCAD, etc. LaserCut requires a "dongle" or "soft dog" to save or export files. The software CD is located in the plastic bin on the shelves by the machine.

Here's the original manual

Here's a working copy of a more user-friendly manual