Difference between revisions of "Wishlist"

From i3Detroit
Jump to: navigation, search
(nobody's touched this in a while...)
(23 intermediate revisions by 7 users not shown)
Line 1: Line 1:
Supplies:
+
This page is for items that add capability or comfort to the space and are generally a one-time purchase.  For consumable items, please refer to the [[Shopping_List]] page.
* Power strips (can never have too many)
+
* Extension cords (ditto)
+
* Welding helmets and gloves
+
* Wire rope (3/32" or so)
+
* Wire rope swaging tool
+
  
Auto:
+
Note: Strike-out items which have been acquired
* Car Hoist
+
 
* Engine Cart
+
==[[Electronics Room]]==
 +
* <s>Digital oscilloscope, Rigol DS1052E seems popular</s>
 +
* <s>'Scope cart, top shelf min 19" deep x 14.5" wide</s>
 +
* Stanley Vidmar or similar small-parts cabinets, ~1000 total parts, ~400 of them should have ESD bins
 +
* Cadex C8000 battery analyzer. ;)
 +
* LCR meter (ESR and Q measurement would be nice too.)
 +
* Spectrum analyzer covering ISM bands, anything else is gravy
 +
* Cat-5/5e/6 cable verifier/certifier/TDR, out of calibration is fine, just for teaching
 +
* <s>Stereo /</s> trinocular microscope, boom mount, C-mount camera adapter
 +
* Preheat station for benchtop rework
 +
* Reflow oven for SMT assembly
 +
* Solder pot
 +
* <s>Vacuum desoldering station (Can be air-driven, we have shop air)</s>
 +
* Solder fume extraction, benchtop or under-bench charcoal absorber and flex arms
 +
* ESD chip-storage bins/boxes, especially multi-drawer cabinets or multi-bin flip-top trays
 +
* Raspberry Pi, Beagleboard/bone, and other similar embedded/dev boards
 +
* SMT-package air nozzles for our hot air station
 +
* Desktop-size PCB shear, 12" throat would be plenty
 +
* <s>A handful of ATX power supplies that actually work</s>
 +
* CompactFlash cards, since you know you're never using 'em again
 +
* Grommets, grips, glands, strain-reliefs, bend-radius-limiters
 +
* Swing-arm magnifying lamps that don't suck (hospital surplus?)
 +
* Small (12-inch?) HDMI-input display for Beagles/Pis on the bench
 +
* <s>parts drawers</s>
 +
* <s>soldering station</s>
 +
* <s>SMT hot-air station</s>
 +
* <s>Pogo pins in spearpoint and tenderizer styles</s>
 +
* Electron microscope
 +
* Atomic clock / GPS-disciplined time/frequency standard
 +
* <s>Thermal camera</s>
 +
* High-speed (1000+ fps) camera
 +
* X-ray machine
 +
* <s>Small heat-sealer, for making plastic bags of custom sizes.</s>
  
Woodwork:
+
==Wood Shop==
 +
* CNC Router, ShopBot or similar(Min: 4'x8')
 
* <s>wood lathe</s>
 
* <s>wood lathe</s>
 
* <s>planer</s>
 
* <s>planer</s>
* <s>belt / drum sander</s>
+
* 6 x 48 inch belt / drum sander
 +
* Bosh 1617 Router for router table
 
* <s>table saw</s>
 
* <s>table saw</s>
 
* <s>mitre saw</s>
 
* <s>mitre saw</s>
 
* <s>drill press</s>
 
* <s>drill press</s>
* CNC Router (Min: 4'x8')
 
  
Computing:
+
Metal Shop:
* server
+
* <s>parts washer</s>
* <s>802.11 access point</s>
+
* <s>surface grinder</s>
* <s>printer</s>
+
* <s>CNC plasma torch</s>
* <s>scanner</s>
+
* Lower Gauge shear, roller & brake (Pneumatic/Electric)
* <s>webcams</s>
+
* Water-Jet Cutter
 
+
* Throatless shear
Metalwork:
+
* Punch or ironworker
* parts washer
+
* English wheel, planishing hammer, etc
 
* <s>mill</s>
 
* <s>mill</s>
 
* <s>lathe</s>
 
* <s>lathe</s>
 
* <s>grinding wheel</s>
 
* <s>grinding wheel</s>
* <s>welding</s>
 
* surface grinder
 
 
* <s>surface plate</s>
 
* <s>surface plate</s>
 
* <s>sheet metal shear / roller / brake</s>
 
* <s>sheet metal shear / roller / brake</s>
* <s>TIG Welder</s>
+
* Anodizing setup (not technically metal shop but whatever)
* Plasma Torch
+
* Lower Gauge shear, roller & brake (Pneumatic/Electric)
+
* Water-Jet Cutter
+
  
Electronics:
+
==Welding Bench==
* stereo microscope
+
* TIG Welder
* <s>parts drawers</s>
+
* Water-cooled TIG torch
* <s>PCB fab</s>
+
* Water-cooler for above
* CNC mill
+
* NdYag Metal-cutting Laser (we can dream!)
* <s>soldering station</s>
+
* Downdraft welding table
* <s>SMT station</s>
+
* Vent hood / arm
 +
* Water table for plasma cutter
 +
* Hand-held plasma cutter
 +
 
 +
==Hardware and Power Tools==
 +
* <s>Storage Bins for parts storage</s>
 +
* Battery-a-month club subscription for fresh Ryobi 18v batteries
 +
 
 +
==Fab Lab==
 +
* 4x8' CNC wood router (shopbot, mechmate, etc)
 +
* <s>3D printer better than Makerbot / Printr bot</s>
 +
* <s>PCB mill</s>
 +
* Milling bits for LPKF Protomat C30/s
 +
* 3D scanner
 +
 
 +
==Computing==
 +
* Small HDMI-input monitor (see electronics room, above)
 +
* SATA hard drives, 2TB, for server storage (up to 6)
 +
* <s>802.11 access point</s>
 +
* <s>scanner</s>
 +
* <s>webcams</s>
 +
* <s>10/100/1000 Switches 24 port or 48 port</s>
 +
* <s>Wireless Access Point</s>
 +
* <s>Printers (Prefer Networked, but can make this happen many ways)</s>
 +
* Enclosed server rack (20U or thereabouts) with acoustic baffles.
 +
* ID card printer (not a laminator! a real print-on-plastic gizmo)
 +
* VR hardware (Oculus Rift, CastAR, etc)
  
Small crafts:
+
==Craft Room==
 
* spray booth
 
* spray booth
* knitting
+
* sewing machine
* <s>sewing machine</s>
+
* serger
 
* loom weaver
 
* loom weaver
 +
* embroidery machine
 
* <s>art supplies</s>
 
* <s>art supplies</s>
 
* <s>painting supplies</s>
 
* <s>painting supplies</s>
* darkroom
 
 
* <s>cross-stitch</s>
 
* <s>cross-stitch</s>
* embroidery
+
* Multicolor silk-screening apparatus
  
Kitchen:
+
==Kitchen==
 
* <s>fridge</s>
 
* <s>fridge</s>
 
* <s>microwave</s>
 
* <s>microwave</s>
* <s>coffee</s>
 
 
* <s>electric kettle</s>
 
* <s>electric kettle</s>
* <s>cups</s>
 
  
Lounge:
+
==Lounge==
 
* MAME cabinet
 
* MAME cabinet
 +
* Pinball machines
  
Misc:
+
==Kiln Zone==
* Dewar Flask for liquid nitrogen
+
* All Glass Molds
* <s>hardware (nuts & bolts)</s>
+
* All COE 96 Frit
* <s>lumber, lumber storage</s>
+
 
* <s>whiteboard</s>
+
 
 +
== Commons Area ==
 +
* Classroom space
 +
* Bean Bag Chairs
 +
* Coffee Table
 +
* Concrete Blocks
 +
* Formica Counter tops
 +
* <s>Bunk couches</s>
 +
* <s>Locker type area for members to store personal items</s>
 +
* <s>Chairs for meeting table and work stations</s>
 +
* <s>Whiteboards</s>
 +
* <s>Physical space to sit and chat.</s>
 +
* <s>Internet connection for laptops & Computer Lab</s>
 +
* <s>Internet connection for servers</s>
 +
* <s>Computer parts for community use</s>
 +
* <s>Lumber - for building a larger center room meeting/project table</s>
 +
* <s>Lamps</s>
 +
* <s>42" LCD display</s>
 +
* <s>LCD Monitors</s>
 +
* <s>Book Case</s>
 +
* <s>Projector</s>
 +
* <s>Speakers</s>
 +
* <s>Stereo Receiver</s>
 +
 
 +
==General Supplies==
 +
* Power strips (can never have too many)
 +
* Extension cords (ditto)
 +
* <s>Dewar Flask for liquid nitrogen</s>
 
* chalkboard (brush-on chalkboard paint to turn a wall into a chalkboard)
 
* chalkboard (brush-on chalkboard paint to turn a wall into a chalkboard)
 +
* Pneumatic valves (12v coil preferred)
 +
* <s>Paint</s>
 +
* <s>Office chairs</s>
 +
* <s>whiteboard</s>
 
* <s>keg</s>
 
* <s>keg</s>
 
* <s>bike rack</s>
 
* <s>bike rack</s>
Line 80: Line 159:
 
* <s>lockers</s>
 
* <s>lockers</s>
 
* <s>Laser Cutter</s>
 
* <s>Laser Cutter</s>
* Lots of the thin black antistatic foam for storing ESD-sensitive chips in
+
* Optics Lab
 +
* Kitchen sink and building capable of same
 +
 
 +
==Miscellaneous==
  
== Wishlist ==
+
I'd like to get i3 equipped with a printing press (letterpress), assuming there's sufficient interest from others.  Don't own one, so I am on the lookout for affordable candidates.  A flat bed proof press of some sort would probably be most useful for the space.  --[[User:Ashe|Ashe]] 13:00, 30 May 2013 (EDT)
  
*<s>Physical space to sit and chat.</s>
+
[[Category:Reference Data]]
*<s>Internet connection for laptops & Computer Lab</s>
+
*<s>Internet connection for servers</s>
+
*<s>Computer parts for community use</s>
+
*Classroom space
+
*<s>Refrigerator</s>
+
*<s>Lumber - for building a larger center room meeting/project table</s>
+
*<s>Lamps</s>
+
*Bean Bag Chairs
+
*Coffee Table
+
*Concrete Blocks
+
*Formica Counter tops
+
*<s>Microwave</s>
+
*<s>Projector</s>
+
*<s>Speakers</s>
+
*<s>Stereo Receiver</s>
+
*<s>Paint</s>
+
*<s>Cat5E</s>
+
*Panduit Finger Tray
+
*42" LCD display
+
*<s>LCD Monitors</s>
+
*<s>Book Case</s>
+
*<s>10/100/1000 Switches 24 port or 48 port</s>
+
*<s>Wireless Access Point</s>
+
*<s>Printers (Prefer Networked, but can make this happen many ways)</s>
+
*Hard Drives for server storage
+
*<s>Storage Bins for parts storage</s>
+
*<s>Locker type area for members to store personal items</s>
+
*<s>Chairs for meeting table and work stations</s>
+
*<s>Oscilloscopes</s>
+
*<s>Signal generators</s>
+
*<s>Whiteboards</s>
+

Revision as of 14:42, 3 June 2014

This page is for items that add capability or comfort to the space and are generally a one-time purchase. For consumable items, please refer to the Shopping_List page.

Note: Strike-out items which have been acquired

Contents

Electronics Room

  • Digital oscilloscope, Rigol DS1052E seems popular
  • 'Scope cart, top shelf min 19" deep x 14.5" wide
  • Stanley Vidmar or similar small-parts cabinets, ~1000 total parts, ~400 of them should have ESD bins
  • Cadex C8000 battery analyzer. ;)
  • LCR meter (ESR and Q measurement would be nice too.)
  • Spectrum analyzer covering ISM bands, anything else is gravy
  • Cat-5/5e/6 cable verifier/certifier/TDR, out of calibration is fine, just for teaching
  • Stereo / trinocular microscope, boom mount, C-mount camera adapter
  • Preheat station for benchtop rework
  • Reflow oven for SMT assembly
  • Solder pot
  • Vacuum desoldering station (Can be air-driven, we have shop air)
  • Solder fume extraction, benchtop or under-bench charcoal absorber and flex arms
  • ESD chip-storage bins/boxes, especially multi-drawer cabinets or multi-bin flip-top trays
  • Raspberry Pi, Beagleboard/bone, and other similar embedded/dev boards
  • SMT-package air nozzles for our hot air station
  • Desktop-size PCB shear, 12" throat would be plenty
  • A handful of ATX power supplies that actually work
  • CompactFlash cards, since you know you're never using 'em again
  • Grommets, grips, glands, strain-reliefs, bend-radius-limiters
  • Swing-arm magnifying lamps that don't suck (hospital surplus?)
  • Small (12-inch?) HDMI-input display for Beagles/Pis on the bench
  • parts drawers
  • soldering station
  • SMT hot-air station
  • Pogo pins in spearpoint and tenderizer styles
  • Electron microscope
  • Atomic clock / GPS-disciplined time/frequency standard
  • Thermal camera
  • High-speed (1000+ fps) camera
  • X-ray machine
  • Small heat-sealer, for making plastic bags of custom sizes.

Wood Shop

  • CNC Router, ShopBot or similar(Min: 4'x8')
  • wood lathe
  • planer
  • 6 x 48 inch belt / drum sander
  • Bosh 1617 Router for router table
  • table saw
  • mitre saw
  • drill press

Metal Shop:

  • parts washer
  • surface grinder
  • CNC plasma torch
  • Lower Gauge shear, roller & brake (Pneumatic/Electric)
  • Water-Jet Cutter
  • Throatless shear
  • Punch or ironworker
  • English wheel, planishing hammer, etc
  • mill
  • lathe
  • grinding wheel
  • surface plate
  • sheet metal shear / roller / brake
  • Anodizing setup (not technically metal shop but whatever)

Welding Bench

  • TIG Welder
  • Water-cooled TIG torch
  • Water-cooler for above
  • NdYag Metal-cutting Laser (we can dream!)
  • Downdraft welding table
  • Vent hood / arm
  • Water table for plasma cutter
  • Hand-held plasma cutter

Hardware and Power Tools

  • Storage Bins for parts storage
  • Battery-a-month club subscription for fresh Ryobi 18v batteries

Fab Lab

  • 4x8' CNC wood router (shopbot, mechmate, etc)
  • 3D printer better than Makerbot / Printr bot
  • PCB mill
  • Milling bits for LPKF Protomat C30/s
  • 3D scanner

Computing

  • Small HDMI-input monitor (see electronics room, above)
  • SATA hard drives, 2TB, for server storage (up to 6)
  • 802.11 access point
  • scanner
  • webcams
  • 10/100/1000 Switches 24 port or 48 port
  • Wireless Access Point
  • Printers (Prefer Networked, but can make this happen many ways)
  • Enclosed server rack (20U or thereabouts) with acoustic baffles.
  • ID card printer (not a laminator! a real print-on-plastic gizmo)
  • VR hardware (Oculus Rift, CastAR, etc)

Craft Room

  • spray booth
  • sewing machine
  • serger
  • loom weaver
  • embroidery machine
  • art supplies
  • painting supplies
  • cross-stitch
  • Multicolor silk-screening apparatus

Kitchen

  • fridge
  • microwave
  • electric kettle

Lounge

  • MAME cabinet
  • Pinball machines

Kiln Zone

  • All Glass Molds
  • All COE 96 Frit


Commons Area

  • Classroom space
  • Bean Bag Chairs
  • Coffee Table
  • Concrete Blocks
  • Formica Counter tops
  • Bunk couches
  • Locker type area for members to store personal items
  • Chairs for meeting table and work stations
  • Whiteboards
  • Physical space to sit and chat.
  • Internet connection for laptops & Computer Lab
  • Internet connection for servers
  • Computer parts for community use
  • Lumber - for building a larger center room meeting/project table
  • Lamps
  • 42" LCD display
  • LCD Monitors
  • Book Case
  • Projector
  • Speakers
  • Stereo Receiver

General Supplies

  • Power strips (can never have too many)
  • Extension cords (ditto)
  • Dewar Flask for liquid nitrogen
  • chalkboard (brush-on chalkboard paint to turn a wall into a chalkboard)
  • Pneumatic valves (12v coil preferred)
  • Paint
  • Office chairs
  • whiteboard
  • keg
  • bike rack
  • peg boards and hooks
  • lockers
  • Laser Cutter
  • Optics Lab
  • Kitchen sink and building capable of same

Miscellaneous

I'd like to get i3 equipped with a printing press (letterpress), assuming there's sufficient interest from others. Don't own one, so I am on the lookout for affordable candidates. A flat bed proof press of some sort would probably be most useful for the space. --Ashe 13:00, 30 May 2013 (EDT)