Tools in this zone:
Tools that are in the Fab Lab Annex (next to Laser Cutter Zone)
To cover the cost of consumables/maintenance, please contribute when you use the Fab Lab equipment. Put money in the blue bin labeled "3D printer fund."
ABS for 3D printing is priced by gram or cubic centimeter of extruded plastic. Please include all the test extrusions and failed prints in your measurements.
Laser time is measured based on laser firing time. Use the timer on the laser cutter display.
|3mm ABS (printrbot)||5¢/gram or cm^3|
|1.75mm ABS (Rostock)||10¢/gram or cm^3|
|FSLaser time||25¢/min cut time|
- Please keep the door between the Fab Lab and the Commons area closed. Doing so will help ensure that when the heater or air conditioner is running, the Fab Lab maintains an appropriate temperature. Also the AC/Heater for the office space isn't anywhere near efficient enough to cool/heat the main shop area, and we don't want to spend a hojillion dollars letting it try.
- Please don't use the FabLab as a shortcut between the commons area and the eLab when someone is working in there. There's not a lot of room, and having a parade go by while you're arguing with the printrbot isn't all that much fun.
Pages in category "Fab Lab"
The following 16 pages are in this category, out of 16 total.