Difference between revisions of "Category:Machine Shop"

From i3Detroit
Jump to: navigation, search
m (added Category:Equipment so it will sow up in subcategory area on equipment page)
(Bench Grinder)
 
(20 intermediate revisions by 9 users not shown)
Line 1: Line 1:
[[Category:Equipment]]
+
{{Zone
[[file:I3detroit-machineshop.jpg|thumb|400px|The machine shop]]
+
|Image=I3detroit-machineshop.jpg
==Content Needed!==
+
|Zone Name=Machine Shop
Machine Shop wardens, tool-owners and users!  Make this page more awesome and provide content about the voodoo you do so well!
+
|Zone Coordinator=Brandon Biller
 +
|Zone E-mail=bbiller87@gmail.com
 +
|Map Area=I
 +
|Zone Color=Blue
 +
}}
 +
 
  
== Bench Grinder ==
 
 
=== Safety Notes ===
 
=== Safety Notes ===
 
*Do not use the bench grinder on aluminum as the aluminum flakes can trap heat in and cause the wheel to fracture.
 
*Do not use the bench grinder on aluminum as the aluminum flakes can trap heat in and cause the wheel to fracture.
 
*Do not cut off any piece of your body
 
*Do not cut off any piece of your body
 +
*Leave the space as clean as you found it.  If you find it in a messy state, please send the coordinator an email describing the mess, date, and time, and then please be extra awesome and clean up after those before you.
  
== Equipment ==
+
== Table of Equipment==
*[[Acer 1440G Lathe]]
+
{| cellspacing="1" cellpadding="1" border="1" class="wikitable"
*[[Bridgeport Mill]]
+
|-
*[[DoAll DBW-1 Bandsaw-Blade Welder]]
+
! Equipment
*[[Brake|MHC Shear Brake and Roll]]
+
! Authorization
*[[Sanford Surface Grinder]]
+
! Owner(s)
 +
! Status
 +
|-
 +
{{#ask:
 +
[[EquipName::+]] [[EquipZone::{{PAGENAME}}]] [[EquipStatus::Running||Usable but repair needed||Down]]
 +
| mainlabel=EquipName
 +
| headers = plain
 +
| ?EquipTrainingRequired=Authorization Required
 +
| ?EquipOwner=Owner(s)
 +
| ?EquipStatus=Status
 +
| format=template
 +
| template=Zone Equipment Table Row
 +
| sort=EquipStatus,EquipName
 +
| order=desc,asc
 +
}}
 +
|}
 +
 
 +
== [[:Machine_Shop_ToDo|TODO List]] ==
 +
^^click the title to edit the todo^^
 +
 
 +
The following list is an attempt to offer up suggestions of tasks that could be accomplished throughout the space by people interested in helping out.
 +
 
 +
Feel free to take charge of one or more of these items as your time and expertise allow. If you have taken charge of a task, please put your name into the field next to the task.
 +
 
 +
'''Should you run out of time or ability to complete a task, make sure to post on [mailto:i3detroit@googlegroups.com the mailing list] and "fail loudly".''' This ensures that task status is shared, and no task languishes in silent failure.
 +
 
 +
{{:Machine_Shop_ToDo}}
  
 
== Useful Sites ==
 
== Useful Sites ==
Line 33: Line 64:
  
 
http://www.mini-lathe.com/Mini_lathe/Introduction/introduction.htm
 
http://www.mini-lathe.com/Mini_lathe/Introduction/introduction.htm
 +
 +
=== Fasteners ===
 +
====Fastener Basics====
 +
http://www.boltdepot.com/fastener-information/Printable-Tools/Fastener-Basics.pdf
 +
 +
====Wood Screws====
 +
http://www.boltdepot.com/fastener-information/Wood-Screws/Wood-Screw-Diameter.aspx
 +
 +
====Nails====
 +
http://www.glencoe.com/sites/common_assets/trade_ind_ed/woodworking_posters/Nails.pdf
 +
 +
=== Technique ===
 +
==== Abom79's channel ====
 +
Adam doesn't skip over much, so if a project takes 4 hours of shop time, there are probably 4 videos, each between 30 and 50 minutes long. Gives a good sense of pacing, order of operations, and general flow of work. For someone who's new to machining, this can be helpful:
 +
 +
https://www.youtube.com/channel/UCw3UZn1tcVe7pH3R6C3Gcng
  
 
== Trash ==
 
== Trash ==
 
* Please don't throw sheet metal, copper, or aluminum away. We recycle these.
 
* Please don't throw sheet metal, copper, or aluminum away. We recycle these.
 +
 +
[[Category:Zones]]

Latest revision as of 14:22, 22 March 2016

Zone Information
I3detroit-machineshop.jpg
Zone Name Machine Shop
Zone Slogan "I'm a lame zone with no slogan"
Zone Coordinator(s) Brandon Biller
Zone E-mail bbiller87@gmail.com
Map Area I
Zone Color Blue


Safety Notes

  • Do not use the bench grinder on aluminum as the aluminum flakes can trap heat in and cause the wheel to fracture.
  • Do not cut off any piece of your body
  • Leave the space as clean as you found it. If you find it in a messy state, please send the coordinator an email describing the mess, date, and time, and then please be extra awesome and clean up after those before you.

Table of Equipment

Equipment Authorization Owner(s) Status
Acer 1440G Lathe Yes Nate BezansonTJ CookBrian WennbergAaron D Running
Bridgeport Mill Yes i3Detroit Running
Dake Band Saw No i3Detroit Running
DoAll Band Saw Yes i3Detroit Running
DoAll DBW-1 Bandsaw-Blade Welder No Running
Edlund Drill Press No i3Detroit Running
MHC Shear Brake and Roll No John Sugg Running
Sanford Surface Grinder No Running

TODO List

^^click the title to edit the todo^^

The following list is an attempt to offer up suggestions of tasks that could be accomplished throughout the space by people interested in helping out.

Feel free to take charge of one or more of these items as your time and expertise allow. If you have taken charge of a task, please put your name into the field next to the task.

Should you run out of time or ability to complete a task, make sure to post on the mailing list and "fail loudly". This ensures that task status is shared, and no task languishes in silent failure.

Task Name Description Priority Champion
Find replacment bridgeport mill 4
Press-brake
  • Adjust as needed for now
  • Buy more heavy duty shear, brake, and roller
4
DoAll Vertical Bandsaw
  • Air pump/chip removal – fix pump or use shop air
  • Clean/refinish blade guides
  • Buy 3 rubber tires (prefer better material than natural rubber)
  • Write out/establish maintenance procedures and timing (i.e. oiling)
  • Fix roll pin in speed adjustment shaft
  • Buy and install ball knob handle for feed adjustment
  • Buy DoAll colored red and gray paint
  • Touch up paint on DoAll
  • Source blade stock
  • Buy padlock for lockout during service
  • Troubleshoot gear shift difficulty - verify conditions in which gears can be changed
  • Buy new blade brushes
  • Buy table guide
  • Buy part holders to use with feed chain
  • guides for blade welder (see Evan A., or Matt G.)
  • grinding wheel for blade welder
3
DAKE Horizontal Bandsaw
  • Clean out blade brushes
  • Clean out chip tray
  • Add fluid if low
  • Replace screws/bolts in switch box that is loose
3
Tapping Machine
  • Remove damaged screw stuck in collet
  • Replace screws with Allen head screws
  • Make/retrofit adjustable tap collet?
3
ACER Lathe
  • Purchase from owner to make “i3-owned”, or buy alternate lathe
  • Tailstock alignment
  • Additional gears for other threading operations
3
Powermatic Sander
  • Replace missing knobs
  • Find table for belt sander portion
3
Sell 2-axis milling vice under table 2
Get rid of gray mesh cabinet 2
Empty scrap bins 2

Useful Sites

Virtual Machine Shop

Information on a wide variety of machining operations.

http://kanabco.com/vms/library.html

Information on Gears

Timing Belts, Pulleys and Metric Gears

Info from Stock Drive Products/ Sterling Instrument (SDP/SI)

http://www.sdp-si.com/web/html/reference_library.htm

Lathe Machines

Introduction to the Mini Lathe

If you know how a dog works with a face plate you may not need to look, but otherwise

http://www.mini-lathe.com/Mini_lathe/Introduction/introduction.htm

Fasteners

Fastener Basics

http://www.boltdepot.com/fastener-information/Printable-Tools/Fastener-Basics.pdf

Wood Screws

http://www.boltdepot.com/fastener-information/Wood-Screws/Wood-Screw-Diameter.aspx

Nails

http://www.glencoe.com/sites/common_assets/trade_ind_ed/woodworking_posters/Nails.pdf

Technique

Abom79's channel

Adam doesn't skip over much, so if a project takes 4 hours of shop time, there are probably 4 videos, each between 30 and 50 minutes long. Gives a good sense of pacing, order of operations, and general flow of work. For someone who's new to machining, this can be helpful:

https://www.youtube.com/channel/UCw3UZn1tcVe7pH3R6C3Gcng

Trash

  • Please don't throw sheet metal, copper, or aluminum away. We recycle these.

Pages in category "Machine Shop"

The following 9 pages are in this category, out of 9 total.