Difference between revisions of "Category:Networking"

From i3Detroit
Jump to: navigation, search
(IP Addresses in use)
(IP Addresses in use: Added range for IP cameras)
 
(30 intermediate revisions by 8 users not shown)
Line 1: Line 1:
 
= Wireless Network =
 
= Wireless Network =
  
The SSID is '''''i3''''' , there is no encryption, this is considered a feature (for the moment).  
+
The SSID is <code>i3detroit</code> , there is no encryption, this is considered a feature (for the moment).
 
+
There is also an SSID of <code>i3detroit-wpa</code> '''with''' encryption; the passphrase is on posters with QR codes scattered about the space.  
You may occasionally see an SSID of '''''3302''''' or '''''1216''''', these are the FIRST Robot control WLANs. They are completely isolated networks and are probably not very interesting to you.
+
The old SSIDs of <code>i3</code> and <code>i3test</code> are deprecated, and they will be going away soon.
 
+
  
 
= LAN Addresses =
 
= LAN Addresses =
Line 10: Line 9:
 
Internally, we are using the 10.13.0.0/16 supernet. It should sidestep most VPN overlap problems, should we establish any connections to other locations.  At present, we are only using one subnet of this:  10.13.0.0/24.
 
Internally, we are using the 10.13.0.0/16 supernet. It should sidestep most VPN overlap problems, should we establish any connections to other locations.  At present, we are only using one subnet of this:  10.13.0.0/24.
  
 +
= [[Patch Panel]] =
 +
 +
This is the page that contains the only authoritative list of what the connections on the networking patch panel go to.
  
 
== Subnet: 10.13.0.0/24 ==
 
== Subnet: 10.13.0.0/24 ==
Line 17: Line 19:
  
 
If you have something that needs to be attached to the network at i3Detroit, a static IP address can be assigned to it.  This is useful in cases where something like a printer or a tool needs to be on the network with a known address that doesn't change.  <BR><BR>Most member and guest laptops, however, do not need one of these.
 
If you have something that needs to be attached to the network at i3Detroit, a static IP address can be assigned to it.  This is useful in cases where something like a printer or a tool needs to be on the network with a known address that doesn't change.  <BR><BR>Most member and guest laptops, however, do not need one of these.
<BR><BR>If you have something that needs a fixed address but can't be configured for one (for some reason), something known as a DHCP reservation can be applied.  Please contact [[User:Jcbender|Joe B]] or Nate W to help you out with this.
+
<BR><BR>If you have something that needs a fixed address but can't be configured for one (for some reason), something known as a DHCP reservation can be applied.  Please contact [[User:Jcbender|Joe B]] to help you out with this.
 
<BR>
 
<BR>
 
If you can, please try to create a wiki page with information about the thing you just attached to the network, and link to that from the IP address listing here.
 
If you can, please try to create a wiki page with information about the thing you just attached to the network, and link to that from the IP address listing here.
Line 24: Line 26:
 
'''Static hosts use the following settings:'''
 
'''Static hosts use the following settings:'''
  
{|
+
{|class="wikitable"
 +
|-
 +
! Item
 +
! Value
 
|-
 
|-
 
| IP address
 
| IP address
Line 42: Line 47:
 
|-
 
|-
 
| Time / NTP server
 
| Time / NTP server
| 10.13.0.1 or 10.13.0.5 (The LAN switch is also an NTP server)
+
| 10.13.0.1 (pfSense router) or 10.13.0.5 (The LAN switch is also an NTP server)
 
|}
 
|}
 
<BR><BR>
 
  
 
=== IP Addresses in use ===  
 
=== IP Addresses in use ===  
{|
+
 
 +
Use the [[Form:Equipment | Equipment Page Form]] to add devices to this list or move items from the old non-Semantic list below.
 +
 
 +
{{#ask:
 +
[[EquipIP::+]] OR [[EquipMAC::+]]
 +
| ?EquipIP=IP address
 +
| ?EquipHostname=Hostname
 +
| ?EquipName=Description
 +
| mainlabel=Description
 +
| ?EquipMAC=MAC
 +
| ?EquipStatus=Status
 +
| ?EquipZone=Zone
 +
| ?TrainerName=Admins
 +
| headers = plain
 +
| sort=EquipIP
 +
| order=asc
 +
}}
 +
 
 +
{|class="wikitable"
 
|-
 
|-
 
! Address  
 
! Address  
Line 58: Line 79:
 
| pfsense  
 
| pfsense  
 
| The firewall and dhcp server. Not a toy. ''Nicht für gefingerpöken''  
 
| The firewall and dhcp server. Not a toy. ''Nicht für gefingerpöken''  
| [[User:Jcbender| JCBender]], Brad, [[User:Nate_lapt| NateW]], Ted and others.
+
| [[User:Jcbender| JCBender]], Brad, Ted and others.
 
|-
 
|-
 
| 10.13.0.5
 
| 10.13.0.5
Line 74: Line 95:
 
| This is the office space access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''
 
| This is the office space access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''
 
| [[User:Jcbender| JCBender]]
 
| [[User:Jcbender| JCBender]]
|-
 
| 10.13.0.8
 
| Asterisk
 
| We make phone calls with this. ''Nicht für gefingerpöken''
 
Going Away
 
| [[User:Nate_lapt| Nate]].
 
 
|-
 
|-
 
| 10.13.0.9  
 
| 10.13.0.9  
 
| Asterisk VM
 
| Asterisk VM
 
| We make phone calls with this. ''Nicht für gefingerpöken''  
 
| We make phone calls with this. ''Nicht für gefingerpöken''  
| [[User:Nate_lapt| Nate]].
+
| [[User:Jcbender| JCBender]]
 
|-
 
|-
 
| 10.13.0.10
 
| 10.13.0.10
Line 94: Line 109:
 
| [[Wireless LAN Controller]] IP #2 (required)
 
| [[Wireless LAN Controller]] IP #2 (required)
 
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken''  
 
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken''  
| [[User:Jcbender| JCBender]]
 
|-
 
| 10.13.0.13
 
| Camera Server - This can be re-purposed
 
| Big brother is watching you. ''Nicht für gefingerpöken''
 
 
| [[User:Jcbender| JCBender]]
 
| [[User:Jcbender| JCBender]]
 
|-
 
|-
Line 106: Line 116:
 
| [[User:Jcbender| JCBender]]
 
| [[User:Jcbender| JCBender]]
 
|-
 
|-
| 10.13.0.15
+
| 10.13.0.17
| i3Debian - Skynet
+
| [[VMServer|hardac.i3detroit.local]]
| "The Debian Box" General-purpose sandbox. Not to be considered reliable or mission-critical
+
| RR-4U-2630-02-SAS
Going away!!
+
| {{Pretty Link|Andrew Meyer}}
| Ted, [[User:Nate_lapt| NateW]], Eric, ToasterDan, Ross
+
|-
+
| 10.13.0.16
+
| ESXI
+
| VMWare ESXI
+
| [[User:Nate_lapt| NateW]]
+
|-
+
| 10.13.0.17
+
| Skynet - VM
+
| "The Ubuntu Box" Runs the Twitter internal scripts
+
| Ted, [[User:Nate_lapt| NateW]], Matt O
+
|-
+
| 10.13.0.18
+
| FileSaurus
+
| FileServer
+
| Jason T, [[User:Nate_lapt| NateW]]
+
 
|-
 
|-
 
| 10.13.0.20
 
| 10.13.0.20
Line 132: Line 126:
 
| Ted
 
| Ted
 
|-
 
|-
| 10.13.0.30
+
| 10.13.0.22
| OpenAccess Control 3.0
+
| [[Space_Automation|mcclellan.i3detroit.local]]
| New (still future) [[RFID entry system]]
+
| MQTT/SpaceAPI VM
| Evan Allen
+
| {{Pretty Link |Andrew Meyer}}
 +
|-
 +
| 10.13.0.35
 +
| fablab
 +
| The fablab host
 +
| {{ Pretty Link| Andrew Meyer}}
 
|-
 
|-
 
| 10.13.0.40
 
| 10.13.0.40
Line 141: Line 140:
 
| i3 Second managed Ethernet switch in rack
 
| i3 Second managed Ethernet switch in rack
 
| [[User:Jcbender| JCBender]]
 
| [[User:Jcbender| JCBender]]
 +
|-
 +
| 10.13.0.41
 +
|
 +
| Full Spectrum 40W Laser Cutter
 +
| {{Pretty Link|Andrew Meyer}}, {{Pretty Link | Matt Gardeski}}
 
|-
 
|-
 
| 10.13.0.50  
 
| 10.13.0.50  
| Plotter
+
| Large format printer
 
| [[HOWTO use the Plotter|The HP DesignJet 300 ]]  
 
| [[HOWTO use the Plotter|The HP DesignJet 300 ]]  
| Roger, Rocco?
+
| i3, [[User:Nbezanson|Nate B]] admin
 
|-
 
|-
 
| 10.13.0.51  
 
| 10.13.0.51  
| Laserjet-5si
+
| HP LaserJet 700 m712 Printer
| [[HOWTO_use_the_Laserjet_5si|Laserjet 5si]] MX printer in the "print shop" area
+
| located in the Compute Zone
| Rocco
+
|  
|-
+
| 10.13.0.53
+
| Color LaserJet 4650n
+
| [[HOWTO_use_the_Laserjet_4650n|Color Laserjet 4650]]n printer in the "print shop" area
+
| [[User:Surferdudemi| RogerS]]
+
 
|-
 
|-
 
| 10.13.0.54
 
| 10.13.0.54
| Color LaserJet 4650dn  
+
| HP Color LaserJet 4650dn  
| [[HOWTO_use_the_Laserjet_4650dn|Color Laserjet 4650]]dn printer in the "print shop" area
+
| [[HOWTO_use_the_Laserjet_4650dn|Color Laserjet 4650]]dn printer in the Compute Zone
 
| [[User:Surferdudemi| RogerS]]
 
| [[User:Surferdudemi| RogerS]]
 
|-
 
|-
| 10.13.0.62
+
| 10.13.0.60-79
| CLP-620ND
+
| IP Cameras
| Big color laser printer
+
| [[Security Cameras]]
| Nate B
+
| [[User:mkfink| Mike F]] & [[Infrastructure]]
 
|-
 
|-
| 10.13.0.75
+
| 10.13.0.83
| Project 1
+
| [[CRTU-RU]]
| A super-secret project
+
| Protocol Analyzer Radio Unit
| [[User:Surferdudemi| RogerS]]
+
| [[User:Nbezanson|Nate B]]
 
|-
 
|-
| 10.13.0.76
+
| 10.13.0.85
| Project 2
+
| cyra
| Another super-secret project
+
| Turret laser system
| [[User:Surferdudemi| RogerS]]
+
| [[User: mjgardes| Matthew Gardeski]]
|-
+
| 10.13.0.90
+
| First-Cam
+
| The Axis 206 network camera over the FIRST corner.
+
| Ted, [[User:Jcbender| JCBender]]
+
 
|-
 
|-
 
| 10.13.0.91
 
| 10.13.0.91
 
| Polycom-ATA
 
| Polycom-ATA
 
| Cisco ATA-186 VOIP adapter for the Polycom conference phone. ''Nicht f&uuml;r gefingerp&ouml;ken''  
 
| Cisco ATA-186 VOIP adapter for the Polycom conference phone. ''Nicht f&uuml;r gefingerp&ouml;ken''  
| [[User:Jcbender| JCBender]], [[User:Nate_lapt| NateW]]
+
| [[User:Jcbender| JCBender]]
 
|-
 
|-
| 10.13.0.99
+
| 10.13.0.95
| printer
+
| [[Nortel_GPSTM|harrison.i3detroit.local]]
| [[HOWTO_Use_the_Laserjet_6P|Laserjet 6p]] in the rack.  
+
| NTP stratum-1 server.
| NateB
+
| {{Pretty Link | Andrew Meyer}}
 
|-
 
|-
 
| 10.13.0.100-245
 
| 10.13.0.100-245
Line 201: Line 195:
 
The default DNS domain handed out for DHCP clients is i3detroit.local.  If you have statically assigned a IP to something, and you want its hostname to be in DNS as your_hostname.i3detroit.local, we can add it to the local server.  Post a request on the mailing list to have that taken care of.
 
The default DNS domain handed out for DHCP clients is i3detroit.local.  If you have statically assigned a IP to something, and you want its hostname to be in DNS as your_hostname.i3detroit.local, we can add it to the local server.  Post a request on the mailing list to have that taken care of.
  
= FAQ =
 
 
Q: Can we open a port in the firewall for my XYZ server?
 
 
:A: Probably not. The upstream bandwidth at the space is rather poor. You are welcome to suggest it, but be prepared to meet with significant resistance from your fellow members. Alternately, many of the members have COLO space that they might be willing to share. Make a proposal on the mailing list and turn on the charm.
 
 
Q: Let's get some better bandwidth at the space!
 
 
:A: We now have 15mbit down, 2 up from WideOpenWest. If [[The Joke That Never Gets Old|that's not enough pipe for you]], we don't know what to say.
 
 
Q: whérε dö ì ƒìñd ┼Hε wâΓεz åñd ┼HΣ p┌Ωn?
 
 
:A: Kid, you are up past your bedtime.
 
  
[[Category:Facility Information]]
+
[[Category:Infrastructure]]

Latest revision as of 22:11, 18 November 2016

Wireless Network

The SSID is i3detroit , there is no encryption, this is considered a feature (for the moment). There is also an SSID of i3detroit-wpa with encryption; the passphrase is on posters with QR codes scattered about the space. The old SSIDs of i3 and i3test are deprecated, and they will be going away soon.

LAN Addresses

Internally, we are using the 10.13.0.0/16 supernet. It should sidestep most VPN overlap problems, should we establish any connections to other locations. At present, we are only using one subnet of this: 10.13.0.0/24.

Patch Panel

This is the page that contains the only authoritative list of what the connections on the networking patch panel go to.

Subnet: 10.13.0.0/24

Static Hosts

If you have something that needs to be attached to the network at i3Detroit, a static IP address can be assigned to it. This is useful in cases where something like a printer or a tool needs to be on the network with a known address that doesn't change.

Most member and guest laptops, however, do not need one of these.

If you have something that needs a fixed address but can't be configured for one (for some reason), something known as a DHCP reservation can be applied. Please contact Joe B to help you out with this.
If you can, please try to create a wiki page with information about the thing you just attached to the network, and link to that from the IP address listing here.

Static hosts use the following settings:

Item Value
IP address Take an unused address from the table below. Document which address you used. When in doubt, ping first.
Subnet mask 255.255.255.0
Default Gateway 10.13.0.1
DNS Server 10.13.0.1
DNS domain name i3detroit.local
Time / NTP server 10.13.0.1 (pfSense router) or 10.13.0.5 (The LAN switch is also an NTP server)

IP Addresses in use

Use the Equipment Page Form to add devices to this list or move items from the old non-Semantic list below.

DescriptionIP addressHostnameDescriptionMACStatusZoneAdmins
PFSense Router10.13.0.1pfsenseFirewall and DHCP server00:02:B3:2D:99:90RunningInfrastructure
Wireless LAN Controller10.13.0.10, 10.13.0.11CISCO-CAPWAP-CONTROLLERWireless LAN Controller00:18:BA:49:C5:27RunningInfrastructure
VMServer10.13.0.17hardac.i3Detroit.localVMServer0c:c4:7a:18:18:98RunningInfrastructure
Mcclellan10.13.0.22mcclellanmcclellan08:00:27:7e:08:1eRunningInfrastructure
Ethernet Switch 310.13.0.3i3switch03Ethernet Switch 3 with POERunningInfrastructure
I3switch0110.13.0.5i3Switch0100:12:80:B5:4C:41RunningInfrastructure
Nortel GPSTMtestIPNortel GPSTMtestMACDownInfrastructure
Address Host Description Admin(s)
10.13.0.1 pfsense The firewall and dhcp server. Not a toy. Nicht für gefingerpöken JCBender, Brad, Ted and others.
10.13.0.5 i3switch01 This is the Cisco 3750 Ethernet switch that drives i3! Not a toy. Nicht für gefingerpöken JCBender
10.13.0.6 Cisco 1130 AP i3DetroitAP01 This is primary access point for i3Detroit. Not a toy. Nicht für gefingerpöken JCBender
10.13.0.7 Cisco 1130 i3DetroitAP02 This is the office space access point for i3Detroit. Not a toy. Nicht für gefingerpöken JCBender
10.13.0.9 Asterisk VM We make phone calls with this. Nicht für gefingerpöken JCBender
10.13.0.10 Wireless LAN Controller We do nifty wireless things with this. Not a toy. Nicht für gefingerpöken JCBender
10.13.0.11 Wireless LAN Controller IP #2 (required) We do nifty wireless things with this. Not a toy. Nicht für gefingerpöken JCBender
10.13.0.14 Cisco 1130 i3DetroitAP03 This is the back-of-shop access point for i3Detroit. Not a toy. Nicht für gefingerpöken JCBender
10.13.0.17 hardac.i3detroit.local RR-4U-2630-02-SAS Andrew Meyer
10.13.0.20 Power Meter Ethernet<->RS485 adapter for the power meter Ted
10.13.0.22 mcclellan.i3detroit.local MQTT/SpaceAPI VM Andrew Meyer
10.13.0.35 fablab The fablab host Andrew Meyer
10.13.0.40 i3Switch02 i3 Second managed Ethernet switch in rack JCBender
10.13.0.41 Full Spectrum 40W Laser Cutter Andrew Meyer, Matt Gardeski
10.13.0.50 Large format printer The HP DesignJet 300 i3, Nate B admin
10.13.0.51 HP LaserJet 700 m712 Printer located in the Compute Zone
10.13.0.54 HP Color LaserJet 4650dn Color Laserjet 4650dn printer in the Compute Zone RogerS
10.13.0.60-79 IP Cameras Security Cameras Mike F & Infrastructure
10.13.0.83 CRTU-RU Protocol Analyzer Radio Unit Nate B
10.13.0.85 cyra Turret laser system Matthew Gardeski
10.13.0.91 Polycom-ATA Cisco ATA-186 VOIP adapter for the Polycom conference phone. Nicht für gefingerpöken JCBender
10.13.0.95 harrison.i3detroit.local NTP stratum-1 server. Andrew Meyer
10.13.0.100-245 DHCP RANGE This is the DHCP range handed out by the firewall. Reservations possible

DNS

The default DNS domain handed out for DHCP clients is i3detroit.local. If you have statically assigned a IP to something, and you want its hostname to be in DNS as your_hostname.i3detroit.local, we can add it to the local server. Post a request on the mailing list to have that taken care of.