- Keep shop area clear of debris, cutoff pieces and other hazards.
- Wear Eye and Hearing protection at all time using woodworking power tools.
- Wear appropriate clothing. Tie long hair back, remove dangling jewelery, remove work gloves.
- Take your time. Accidents happen because someone is in too big of a hurry.
- Think about what you are doing. If something seems unsafe, it probably is.
- Do not vacuum any metal objects with dust-control machine, it must be used only for sawdust.
- Craftsman 12in Band Saw
- Craftsman 16gal Wet-Dry Vac
- Cyclonic Dust Collection System
- Delta 12in Disc Sander
- Delta 4in Belt + 6in Disc Sander
- DeWALT Mitersaw
- Grizzly 16in Band Saw
- Ingersoll Rand Air Compressor
- Jet Drill Press
- Milwaukee Panel Saw
- Powermatic Oscillating Spindle Sander
- Rigid 16gal Wet-Dry Vac
- Router Table
- SawStop Table Saw
- Skil Scroll Saw
- Wood Lathe
Raw Material Storage
Material Storage Policy
Sheet Goods Rack: 1/4 sheet (8 sq. ft.) or larger sheet goods, or boards narrower than 12 in. but longer than 4 ft. A-frame Rack Exterior: Less than 1/4 sheet (8 sq. ft.) but at least 24 in. by 12 in. sheet goods, or boards narrower than 12 in. and between 2 ft. and 4 ft. long. A-frame Rack Interior: Boards narrower than 12 in. and more than 4 ft. long, and not sturdy enough to stand up in a vertical storage rack. Shelf under the miter saw: a limited quantity of smaller pieces for open-use will be kept here.
Material Owned by Individual Members
Raw Material Space permitting, storage in the Sheet Goods Rack and A-frame Rack is available for the sizes described above. Your raw material must be marked with Name, Phone, Email, and Date, or Parking Permit, or it will be considered open-use and available for others to use. Your raw material should not be stored for longer than 90 days. After 90 days, even fully labeled material becomes open-use. We request that WS Parking Permits not extend for more than 90 days.
In-Process Projects: A shelving unit marked for Member Projects is available in the wood shop for small in-process storage while clamping, gluing, finishing, etc.. Use of this area requires a Parking Permit and should not exceed 30 days. Large in-process projects also require a Parking Permit and should be on a cart or some movable rack so that others may move it out of the way.
I3-Owned Material Storage
Any material marked with a date and “i3” or “WS” is reserved until that date for an internal i3 project and should not be used without a Warden's permission. After that date, it is available for open-use.
Open-Use Material Storage
Materials stored in the “over the window rack”, the Sheet Goods Rack, or the rolling A-frame Rack, without a proper label as described above, are available for open-use by anyone working in the space.
Open-Use Compensation: The intent of open-use material, whether donated or purchased with Wood Shop funds, is to provide a convenient source for small amounts of common materials. We do not have space or funds to provide a complete material supply for projects. If you use a piece of open-use material longer than 4 feet or larger than a quarter sheet, please deposit an appropriate amount of compensation into the Wood Shop Donation Box.
Material Donation: Members wanting to donate a manageable quantity of leftover project material may leave it in the appropriate location, space permitting, where it will be available for open-use. The Wardens will periodically cull the stored open-use material to remove duplicates and seldom-used items.
Power Tool Wish List
- Router Table
- 6inch by 48 inch combo belt sander
- Thickness Planer 13 inch like Dewalt DW735X
- i3 ownership of Lathe and tools
- i3 ownership 15 inch Floor mount Drill Press
Hand Tool Wish List
- Router table saftey items feathera boards etc.
- crosscut sled for table saw
- Carpenter's Square
- more good clamps (not harbor freight)
Wood Shop Training
Pages in category "Wood Shop"
The following 31 pages are in this category, out of 31 total.