|Notice: Certain tables on this site may not be displayed due to technical difficulties. The issue is currently under investigation.|
HOWTO Hoop a Piece of Fabric for the Husqvarna Designer SE
This mini tutorial describes how to hoop a small, flat piece of fabric for use with the Husqvarna Designer SE.
Find your hoop in the second drawer of the storage fixture under the Husqvarna.
A. Set your fabric on a work surface, fabric side up.
B. With the golden arrow visible and at the bottom, set the inner part of the hoop on the fabric.
C. With the golden arrow visible at the bottom, slip the outer hoop underneath.
D. Firmly push the inner hoop into the outer. Tighten the thumbscrew. The fabric should be fairly taut, but doesn't need to be perfectly smooth.