View source for Haas VF-3 CNC Mill

{{Equipment
|Name=HAAS VF-3
|Zone=CNC Shop
|ReservationAddress=i3detroit.org_3437393236313038333131@resource.calendar.google.com
|CalendarURL=https://calendar.google.com/calendar/embed?src=aTNkZXRyb2l0Lm9yZ18zNDM3MzkzMjM2MzEzMDM4MzMzMTMxQHJlc291cmNlLmNhbGVuZGFyLmdvb2dsZS5jb20
|LooksLike=i3_HAAS.jpg
|Owner=i3Detroit
|MakeModel=HAAS VF-3
|Date=2013-11
|StorageLocation=Along East wall towards the back
|Authorization Required=Yes
|Status=Usable but repair needed
|Value=18500
|Documentation=[http://diy.haascnc.com/ Haas Automation Resource Center] - Contains G-code manuals, Service Manuals, Repair Manuals, etc.
|OtherReferences=Travels - 40" x 20" x 25"

Spindle Motor - 15 HP

Spindle RPM - 7500 RPM

Tool type - CAT40

Number of Positions on Tool Changer: 20

Max. Cutting Feed Rates: 200 IPM

Rapid Feed Rate: 450 IPM

Machine Weight: Approx. 12000 Lbs.
|Intro=A vertical CNC machining center with 40" X-axis, 20" Y-axis and 25" Z-axis travel.
|Rules=Must be on the list of operators to actually run the machine (find the training process [[HAAS_Training|here]]!).  We are not a job shop but an Authorized user is able to take paying jobs/work for hire.  No one is authorized to remove covers of the machine to work on it for mechanical or electrical reasons without permission from the ZC. This includes changing any of the machine parameters.

Please Note: Autorized users of the Haas may not be operating the machine while under the influence of alcohol or intoxicating substances. The use of any substance that can alter or impair mental abilities (including but not limited to medications, drugs, and alcohol) can greatly increase the risk for injury.  Use of the Haas while under the influence of impairing substance can result in your authorization for the machine to be revoked.

CLEAN UP AFTER YOURSELF
The Haas Zone is a shared workspace. Users are expected to clean their work area and remove all personal items, materials, tools, and waste when finished. No member should be required to clean up after another.
Failure to comply after repeated reminders may result in suspension or revocation of Haas Zone authorization.

|Instructions=Post Processor for Haas [[Media:HAAS Post-Processor.txt|here]]! (NOTE: Rename file to .cps after you download it)
|MaintenanceInfo=Maintenance is performed by the operators.<br>
[[HAAS_Maintenance|HAAS Maintenance Notes Page]]
|FAQs=Here is a link to the FAQ page: [[HAAS_FAQ|HAAS FAQ]]
|ToDos=# Update Wiki pages for this page and for Training page as well as produce training videos.
|Equipment User={{Equipment User
|UserName=Jim Kemp
|TrainedBy=Brian Wennberg
}}{{Equipment User
|UserName=Brian Wennberg
|TrainedBy=Jim Kemp
}}{{Equipment User
|UserName=Patrick George
|TrainedBy=Jim Kemp
}}{{Equipment User
|UserName=Brian McPherson
}}{{Equipment User
|UserName=Terry Wynn
|TrainedBy=Jim Kemp
}}{{Equipment User
|UserName=Thad Johnson
|TrainedBy=Terry Wynn, Jim Kemp
}}{{Equipment User
|UserName=Derek Kuschel
|TrainedBy=Jim Kemp, Brian Wennberg
}}{{Equipment User
|UserName=Konrad Brown
|TrainedBy=Brian Wennberg, Jim Kemp
}}{{Equipment User
|UserName=Anthony Graziani
|TrainedBy=Jim Kemp, Brian Wennberg
}}{{Equipment User
|UserName=Daniel Pawlak
|TrainedBy=Jim Kemp, Brian Wennberg
|TrainedDate=2016/05/09
}}{{Equipment User
|UserName=TJ Johnson
|TrainedBy=Jim Kemp, Brian Wennberg
|TrainedDate=2016/8/31
}}{{Equipment User
|UserName=Adam Scholl
|TrainedBy=Terry Wynn, Brian Wennberg
|TrainedDate=2015/09/10
}}{{Equipment User
|UserName=James Freed
|TrainedBy=Jim Kemp, Brian Wennberg
}}{{Equipment User
|UserName=Paul Darling
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Bravin Neff
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Emanuel Neculai
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Andy Kostrzewa
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Paul Frick
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Frank Arthmire
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Wojciech Stojko
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Frank La Marca
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Jeremy Posner
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Matt Carpenter
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=John Coggeshall
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Rufus Thames
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Brian Maynard
|TrainedBy=Thad Johnson
}}{{Equipment User
|UserName=Christian Sam
|TrainedBy=Thad Johnson
|TrainedDate=Feb 15, 2019
}}{{Equipment User
|UserName=Kulvir Jandir
|TrainedBy=Thad Johnson
|TrainedDate=April 15, 2019
}}{{Equipment User
|UserName=Lisa Gardner
|TrainedBy=Thad Johnson
|TrainedDate=November 4, 2020
}}{{Equipment User
|UserName=Dan Moore
|TrainedBy=Thad Johnson
|TrainedDate=November 4, 2020
}}{{Equipment User
|UserName=Jeff Burdick
|TrainedBy=Thad Johnson
|TrainedDate=November 10, 2020
}}{{Equipment User
|UserName=Tim Wainz
|TrainedBy=Thad Johnson
|TrainedDate=February 1, 2023
}}{{Equipment User
|UserName=Dave Hurt
|TrainedBy=Thad Johnson
|TrainedDate=April 8, 2023
}}{{Equipment User
|UserName=Michael Lahrman
|TrainedBy=Thad Johnson
|TrainedDate=June 27, 2024
}}{{Equipment User
|UserName=Tom Anderson
|TrainedBy=Thad Johnson
|TrainedDate=November 24, 2024
}}{{Equipment User
|UserName=Jack Reinke
|TrainedBy=Thad Johnson
|TrainedDate=December 11, 2024
}}{{Equipment User
|UserName=Ivy Rose
|TrainedBy=Thad Johnson
|TrainedDate=February 17, 2025
}}{{Equipment User
|UserName=Ravi Shah
|TrainedBy=Thad Johnson
|TrainedDate=February 19, 2025
}}{{Equipment User
|UserName=Jack Reinke
|TrainedBy=Thad Johnson
|TrainedDate=March 11, 2025
}}
|Equipment Trainer={{Equipment Trainer
|TrainerName=Thad Johnson
|CertifiedDate=2015/11/19
}}
}}
==  Photo Gallery == 
HAAS Photo Gallery of Member Projects done in the CNC Zone: [[CNC_Photo_Gallery|CNC Photo Gallery]]
{|
| [[File:HAAS_Shifter_Plate.jpg|200px|thumb|link=https://www.i3detroit.org/wiki/CNC_Photo_Gallery]]
| [[File:HAAS_Custom_Clamp.jpg|200px|thumb|link=https://www.i3detroit.org/wiki/CNC_Photo_Gallery]]
| [[File:HAAS_Hemingwrite.jpg|200px|thumb|link=https://www.i3detroit.org/wiki/CNC_Photo_Gallery]]
|}

[[Category:Zones]]