Difference between revisions of "MIG Welder - Hobart RC250"

From i3Detroit
Jump to: navigation, search
Line 18: Line 18:
| Documentation =
| Documentation =
*Hobart MIG Welder [https://drive.google.com/file/d/0B1c1L3V7oivueV9QbEN4THNQekFYcnR5cFgxN2FZT01HNGg0/edit?usp=sharing Manual]  
*Hobart MIG Welder [https://drive.google.com/file/d/0B1c1L3V7oivueV9QbEN4THNQekFYcnR5cFgxN2FZT01HNGg0/edit?usp=sharing Manual] we have spec 5719B-1 pages 52-53 for schematics
*101 Control Panel [https://drive.google.com/file/d/0B1c1L3V7oivuQmxHX1RHVU9SQ2JYT0o2YjlwSTdRcFVqTWtR/edit?usp=sharing Manual]
*101 Control Panel [https://drive.google.com/file/d/0B1c1L3V7oivuQmxHX1RHVU9SQ2JYT0o2YjlwSTdRcFVqTWtR/edit?usp=sharing Manual]

Revision as of 22:23, 7 January 2014

MIG Welder - Hobart RC250
Hobart RC-250.jpg
|175px| ]]
Name Hobart Mig Welder
Owner i3 Detroit
Make Model Hobart RC-250
Part Number [[EquipNumber::5719B-1
Hobart RC-250 Name plate.jpg
Date Acquired
Storage Location Welding Area, against the wall.
Authorization Required
Documentation *Hobart MIG Welder Manual we have spec 5719B-1 pages 52-53 for schematics
Other References * Welder consumables are on this list: Welding Shop Consumables



Be Trained!! This machine takes some playing with to get the hang of.


  • Turn on the Gas bottle at the wall rack. Remember that the seal system for inert gas only completely seals the stem at full closed and full open. Turn the knob in the desired direction until it stops. When the "Purge" switch is pressed, you can adjust the argon/co2 flow (watch the red ball in the vertical glass tube).
  • Check the power disconnect switch on on the wall. (BusBar #1 Hobart Welder) Is it turned on?
  • Adjust current/wire speed, corse voltage and fine (start low so you don't fuse the tip shut, if you do.. replace it!)
  • Wire not feeding? Check the wire switch is set to "fwd"
  • start 1/4-1/2" away from material. (too close and you'll fuse the tip shut)

Maintenance Info

  • Adjusted machine settings in control box. Seemed to help with tip fusing issue.