MIG Welder - Hobart RC250

From i3Detroit
Revision as of 19:44, 20 August 2013 by Nate lapt (Talk | contribs) (Created page with "{{Equipment | Name = Hobart Mig Welder | Owner = i3 Detroit | StorageLocation = Welding Area, against the wall. | MakeModel = Hobart RC-250 | PartNumber = 5719B-1 | Rul...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


MIG_Welder_-_Hobart_RC250&x=.png
https://www.i3detroit.org/wiki/MIG_Welder_-_Hobart_RC250

Hobart Mig Welder

Basic Info

  • Ownership: i3 Detroit
  • Location: Welding Area, against the wall.
  • What it looks like:
Hobart RC-250.jpg

Manufacturer Information

  • Make/Model: Hobart RC-250
  • Part Number: 5719B-1

Documentation

  • Hobart MIG Welder Manual

Rules

Be Trained!!

Instructions

  • Turn on the Gas bottle at the wall rack. Remember that the seal system for inert gas only completely seals the stem at full closed and full open. Turn the knob in the desired direction until it stops. When the TIG machine is turned on, you can adjust the argon flow (watch the red ball in the vertical glass tube).
  • Check the power switch on the junction box on the wall. Is it turned on?

Authorized Users and Trainers

No equipment access set up. See User:pajamapuma or Equipment Access Project for help.

Other References

Maintenance

not specified

Things that Need to be Done

not specified

FAQs

none yet