MIG Welder - Hobart RC250

From i3Detroit
Revision as of 00:13, 27 August 2013 by Nate lapt (Talk | contribs)

Jump to: navigation, search
MIG Welder - Hobart RC250
"File:Hobart_RC-250.jpg | thumb" cannot be used as a page name in this wiki. [[Image:
Hobart RC-250.jpg
|175px| ]]
Name Hobart Mig Welder
Zone
Owner i3 Detroit
Make Model Hobart RC-250
Part Number [[EquipNumber::5719B-1
Hobart RC-250 Name plate.jpg
]]
Date Acquired
Storage Location Welding Area, against the wall.
Authorization Required
Status
Value
Documentation *Hobart MIG Welder Manual
Other References * Welder consumables are on this list: Welding Shop Consumables

Intro

Rules

Be Trained!!

Instructions

  • Turn on the Gas bottle at the wall rack. Remember that the seal system for inert gas only completely seals the stem at full closed and full open. Turn the knob in the desired direction until it stops. When the TIG machine is turned on, you can adjust the argon flow (watch the red ball in the vertical glass tube).
  • Check the power switch on the junction box on the wall. Is it turned on?

Maintenance Info

FAQ

ToDo