Difference between revisions of "Jet Drill Press"

From i3Detroit
Jump to: navigation, search
(Added note about table alignment.)
Line 23: Line 23:
 
* Please wear safety glasses!
 
* Please wear safety glasses!
 
* Please clamp your work to the drill press table.
 
* Please clamp your work to the drill press table.
 +
* Before you drill, check to make sure your bit is located over the hole in the table. When the table is raised or lowered, it can swing a little bit to the side. If the hole is not aligned under the bit, when the drill goes through the workpiece it will make another divot like the one you can see on the table now.
  
 
| Instructions =
 
| Instructions =

Revision as of 09:11, 22 February 2013

Jet Drill Press
"File:Jetdrillpress.jpg|Jet drill press photo" cannot be used as a page name in this wiki. [[Image:Jet drill press photo|175px| ]]
Name Jet Drill Press
Zone
Owner Dave Scholl
Make Model Jet JDP-15M
Part Number Stock No. 354165, Serial No. 7090087
Date Acquired
Storage Location In the wood shop on a rolling cart.
Authorization Required
Status
Value
Documentation * User manual
Other References TBD

Intro

It is most often used for drilling holes in wood, plastic, and related materials. With specialized bits, it can also be used for sanding.

Rules

  • Please wear safety glasses!
  • Please clamp your work to the drill press table.
  • Before you drill, check to make sure your bit is located over the hole in the table. When the table is raised or lowered, it can swing a little bit to the side. If the hole is not aligned under the bit, when the drill goes through the workpiece it will make another divot like the one you can see on the table now.

Instructions

  • The chuck key is on a retractable chain on the right-hand side, next to the motor.
  • Drill press clamps and the drill press vise are kept in the cart under the drill press.

Maintenance Info

TBD

FAQ

TBD

ToDo

  • Build Cabinet for Drill Press tools and accessories