View source for Laser Cutter - Full Spectrum

{{Equipment
|Name=40W Laser Cutter
|Zone=Laser Cutter
|LooksLike=FSLaser.jpg
|Owner=i3Detroit
|MakeModel=Full Spectrum Laser
|PartNumber=HL40-5g Hobby Advanced Laser 20" x 12"
|Date=2013-07-31
|StorageLocation=Table north of Wolverine
|Authorization Required=No
|Status=Down
|Value=3500
|MACaddress=00:04:a3:a1:3c:df
|IPaddress=10.13.0.41
|Hostname=fslaser.i3detroit.local
|Documentation=Owner's Manual black binder on west shelves

Online version: [[File:FSLaser_Hobby_Series_Manual.pdf]]
Old version: [[File:Hobby-adv-manual-r0.2.pdf]]
Driver/control software: [[File:RetinaEngrave3D-4.430.zip]]
|Rules=* Please donate $0.25/min of cut time
* DO NOT cut or engrave any material listed as BANNED on the [[Laser Materials List]]
* DO NOT cut or engrave any material that is not listed at all on the [[Laser Materials List]]. Ask the zone coordinator ahead of time.
* If you don't know what a material is, DO NOT cut or engrave it. Ask the zone coordinator to help you identify it.
|Instructions=Owner's Manual: black binder behind the machine

Vent fan, chiller, and air compressor can be controlled with [[TBA]] on the bench next to the laser cutter.

<s>RetinaEngrave (control software) runs on a VM which you can access from the Raspberry Pi terminal hanging on the wall. Click the menu in the upper left, then "VMs", then "Retina Engrave". </s>

Alternately, you can [https://s3-us-west-2.amazonaws.com/fslaser/Software/RetinaEngrave/Windows download] and install it on your Windows laptop.

Power on the laser by twisting the Emergency Stop button clockwise a little bit, so it springs up. Wait for the controller to boot. RetinaEngrave should detect it. If not, try restarting RetinaEngrave, or use the "specify IP address for connection" and type in the number (10.13.0.41) displayed on the laser's control panel.

Operation from this point should proceed according to the manual.
|ToDos=*The focus slide could be redesigned for less flex.
*Payment counter?
*New roller design
|Equipment User={{Equipment User
|UserName=Clayton McCord
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=Nate Bezanson
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=Kevin Flory
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=Nikki Weltman
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=Rob Lifton
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=Marie-Therese Enga
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=John Sugg
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=Leonard Kinnaird-Heether
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=Amelia Meyer
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=Matt Gardeski
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=Justin Triplett
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=Matt Huber
|TrainedBy=Amelia Meyer
|TrainedDate=2014/12/27
}}{{Equipment User
|UserName=Greg Smith
|TrainedBy=Amelia Meyer
|TrainedDate=2015/01/10
}}{{Equipment User
|UserName=Ashley Prescott
|TrainedBy=Amelia Meyer
|TrainedDate=2015/01/20
}}{{Equipment User
|UserName=Mark Lenigan
|TrainedBy=Amelia Meyer
|TrainedDate=2015/01/20
}}{{Equipment User
|UserName=Chris Prout
|TrainedBy=Amelia Meyer
|TrainedDate=2015/01/20
}}{{Equipment User
|UserName=Al Schwartz
|TrainedBy=Amelia Meyer
|TrainedDate=2015/01/20
}}{{Equipment User
|UserName=Hans Chen
|TrainedBy=Amelia Meyer
|TrainedDate=2015/01/20
}}{{Equipment User
|UserName=Aaron Prunkard
|TrainedBy=Matt Gardeski
|TrainedDate=2015/01/20
}}{{Equipment User
|UserName=Tyler McCardell
|TrainedBy=Amelia Meyer
|TrainedDate=2015/01/20
}}{{Equipment User
|UserName=Alek Mabry
|TrainedBy=Amelia Meyer
|TrainedDate=2015/01/20
}}{{Equipment User
|UserName=Matthew Mabry
|TrainedBy=Amelia Meyer
|TrainedDate=2015/01/20
}}{{Equipment User
|UserName=Lewis Dennison
|TrainedBy=Matt Gardeski
|TrainedDate=2015/01/31
}}{{Equipment User
|UserName=Nico Raftis
|TrainedBy=Justin Triplett
|TrainedDate=2015/04/08
}}{{Equipment User
|UserName=Evan Allen
|TrainedBy=Matt Gardeski
|TrainedDate=2015/11/14
}}{{Equipment User
|UserName=Dan Pawlak
|TrainedBy=Matt Gardeski
|TrainedDate=2015/11/14
}}{{Equipment User
|UserName=Charlie Rysenga
|TrainedBy=Amelia Meyer
|TrainedDate=2016/01/03
}}
|Equipment Trainer={{Equipment Trainer
|TrainerName=Amelia Meyer
|CertifiedDate=2014/12/27
}}{{Equipment Trainer
|TrainerName=Justin Triplett
|CertifiedDate=2014/12/27
}}
}}