Property:TODO
Jump to navigation
Jump to search
2
Determine maintenance schedule and populate this section better.
Determine bolt torque requirements and obtain appropriate wrench if necessary. +
3
Add Instructions, Training, Materials +
Sell machine +
* Sell machine
+
* Actually install printer in space.
+
* Sell machine
+
* More permanent spool holder
* Use printer more to confirm functionality and refine instructions
* Confirm if octoprint can be used for this printer
+
* replace broken/damaged frame pieces (New parts are on the shelf next to the printerbot)
* put all the parts back together and make sure it still works
==Fantasy WishList==
* install Repetier Firmware
* add a display and rotary encoder for standalone operation
* build a Power Tower to hold PSU and spool
+
* Light bar:
** Needs to be connected to relay, then powered from the 24VDC machine power supply.
** Relay needs to be connected to Raspberry Pi I/O for the OctoPrint Environment plugin to control
* Credentials for OctoPrint and Pi need to be put onto machine physically,. and/or shared with [[User:Agmlego|Amelia Meyer]]
* MMU2S filament spools need a better holder. Maybe something like a retracting winder?
* Evaluate if to sell machine or rework into third printer
+
*Automated display of per-print cost.
*Cooling fan design/build.
+
*Troubleshoot calibration issue, G29 command causes hang and code crash
* Return to owner during FabLab reorganization
+
*Bring in rack mount computer to run the machine.
*Find a source for consumables.
*Determine what the materials costs are.
*Write up maintenance procedures.
*Write up procedures for use.
+
4
*Put a sign on the trailer that indicates usage rules.
*Mount the spare tire to the tongue.
+
A
Why does plugging a serial to usb thing into the serial port cause it to turn off.
That is sub optimal. +
Center Tailstock +
Need to have controller built +
Controller needs fixing/replacement. Foof/Brian need a couple round tuits. +
B
Replace machine. +
Jan to develop training program
Make training kit
Make machine dust cover
Signage for cover
Develop user fee structure +
I need to take more photos and post them along with a link or two to some sort of airbrush how-to. I've never used one myself, so until I've accessed that content and played around with the airbrush, this page will remain a stub. +
Add a spring loaded hold down to the left (anvil) side +
When we get a working camera again, a picture would be nice... +
[[file:CraftRoomInventory_BlackAndDecker_SerialPlate_Medium.jpg|thumb|View of the model information/serial number plate.]] +
replace or repair light (droops)
wire in the power feed, light, and DRO so the wires are not in the way
run air line to the machine for coolant mister
repair coolant mister (droops)
buy and add pneumatic drawbar
buy and add drill-powered knee +
Get a power cord as it's missing.
buy: Bobbin (4) https://www.brother-usa.com/products/sa156
(One is on machine.) SA156
buy: Walking Foot SA140 +
C
#Install permanent air drop for the machine, check air humidity/oil/etc. (Complete)
#Install permanent power for the CNC side of the machine
#Clean out the water table (Complete 10/21/25. Alex Zurowski and Will Cunningham)
#Seal water table leaks (Complete 10/17/25. Alex Zurowski and Will Cunningham)
#Install limit switches (included with purchase, not currently installed)
#Develop class content for training (Complete 12/3/25. Alex Zurowski)
#Inventory consumables for the plasma cutter (Complete 10/21/25. Alex Zurowski and Will Cunningham)
#Determine per-minute rate for using the machine (Complete 11/17/25. Alex Zurowski)
#Put together instructions on swapping to the hand torch on the plasma cutter for hand work
#Create signs for Down/Training/Etc (Complete 11/17/25. Alex Zurowski)
#Email Plasma Green about water evaporation and refilling. (Complete 10/22 Will Cunningham)
+
* Officially approve this equipment to live in the CNC zone
* Populate this wiki page with useful information
+
* Figure out why it keeps saying it needs service
* Replace south end of bracket end with more C-shaped beam clamps
+
* Make Controller for Automated Temperature Control
+
* Get up and running again
* Make Controller for automated temperature control
+
* Install 3D scanner software (???)
* Install standalone transcription software ([https://handy.computer/ Handy] or [https://thewh1teagle.github.io/vibe/ Vibe] or [https://buzzcaptions.com/ Buzz] or something else)
+
* Plumb in vent ducting after AC blast gate
* Check if this belongs in New Elab for reflow
+
User guide, instructions, TBD +
* Obtain a table (acquired, set up March 20)
* Set up a computer with the software
* Train trainers
+
purchased use New Rotary AirLock* +
D
* Tie into shop dust collector
* Fix the acme rods so that they have a flat on the end that is connected to the shaft couplers.
+
Build a stand and bolt it to the floor +
* Adjust the wheel-lock brakes so both work. Presently only the left one works well.
+
*
+
Needs a fitted cover, at some point.
How-to list for printing patterns and posters on the roll paper at full size. +
Set up and get working. +
* Continue welding trials with bi-metal blade
+
Might need plugging in. +
* Use slack and slack blame into some channel for announcements of pipeline status
* Better way to edit server-side configuration (instead of re-creating the containers)
+
E
Fix tensioner +
Better documentation and investigation into the design/execution toolchain--scheduled to be handled by the Coordinators.
Coordinators: Regularly check bobbin cutting blade. Order new part from repair shop if damaged.
Coordinators: Regularly check for nicks/scratches in needle plate. Sand out as necessary. Similarly, nicks in feet should be sanded lightly to reduce the burrs.
Kevin: Rewrite maintenance page as maintenance + troubleshooting; add link to Husqvarna troubleshooting section of manual (http://www.husqvarnaviking.com/SiteMedia/Products/Machines/Support/Designer_SE_Troubleshooting_EN.pdf).
Anyone: List available hoop sizes +
Signage for hard cover +