Difference between revisions of "Rockwell Drill Press"

From i3Detroit
Jump to: navigation, search
(New draft section for training points)
Line 37: Line 37:
  
 
| FAQs = TBD
 
| FAQs = TBD
 +
 +
== Training Points (draft content to support Ted's shop training initiative) ==
 +
 +
* '''Novice''' (must be supervised by user or higher level)
 +
** Wood shop tour
 +
** Safety glasses, dangling hair, hoodie strings, etc.
 +
** Power switch location/operation
 +
** Workpiece materials compatible with this machine
 +
** Clamping the workpiece safely
 +
** How hard to push the drill bit into the workpiece
 +
** Marking an accurate hole location
 +
 +
* '''User'''
 +
** Review all points above
 +
** Center punch / center drill to begin holes
 +
** Selecting drill bits
 +
** Changing drill bits
 +
** Adjusting the table height
 +
** Setting the vertical travel stops
 +
** Using a drill press vise
 +
** Dust control system
 +
** Cleanup with shop vac or brush
 +
** How to tell when a bit needs to be sharpened
 +
** Consumables costs
 +
 +
* '''Expert'''
 +
** Review all points above
 +
** Using brushes or sanders in the chuck
 +
** Changing the drill speed
 +
** Making fixtures for repeating hole locations
 +
** Making fixtures for workpiece clamping
 +
 +
* '''Trainer'''
 +
** Expert level with sufficient experience
  
 
}}
 
}}
 
[[Category:Machine Shop]]
 
[[Category:Machine Shop]]

Revision as of 20:17, 7 November 2012

Rockwell Drill Press
"File:Rockwelldrillpress.jpg|Rockwell drill press photo" cannot be used as a page name in this wiki. [[Image:Rockwell drill press photo|175px| ]]
Name Rockwell Drill Press
Zone
Owner TBD
Make Model Rockwell 15-069 (1/2 HP motor)
Part Number 1721149
Date Acquired
Storage Location In the metal shop
Authorization Required
Status
Value
Documentation
Other References TBD

Intro

It is used for drilling holes in a variety of materials (metal, wood, etc.).

Rules

  • Please wear safety glasses!

Instructions

  • Drill press accessories are kept on the plastic shelves on the other side of the bench grinders.

Maintenance Info

TBD

FAQ

TBD

Training Points (draft content to support Ted's shop training initiative)

  • Novice (must be supervised by user or higher level)
    • Wood shop tour
    • Safety glasses, dangling hair, hoodie strings, etc.
    • Power switch location/operation
    • Workpiece materials compatible with this machine
    • Clamping the workpiece safely
    • How hard to push the drill bit into the workpiece
    • Marking an accurate hole location
  • User
    • Review all points above
    • Center punch / center drill to begin holes
    • Selecting drill bits
    • Changing drill bits
    • Adjusting the table height
    • Setting the vertical travel stops
    • Using a drill press vise
    • Dust control system
    • Cleanup with shop vac or brush
    • How to tell when a bit needs to be sharpened
    • Consumables costs
  • Expert
    • Review all points above
    • Using brushes or sanders in the chuck
    • Changing the drill speed
    • Making fixtures for repeating hole locations
    • Making fixtures for workpiece clamping
  • Trainer
    • Expert level with sufficient experience

ToDo

TBD