Difference between revisions of "Rockwell Drill Press"

From i3Detroit
Jump to: navigation, search
(Updates to training section)
(Updates to training section)
Line 40: Line 40:
  
 
== Training ==
 
== Training ==
 +
Each core class is a prerequisite for the next core class; the electives (if any) are optional.
  
* '''Novice''' (group or individual trainingl)
+
* '''Core Class 1''' (group or individual trainingl)
 
** Wood shop tour
 
** Wood shop tour
 
** Safety glasses, dangling hair, hoodie strings, etc.
 
** Safety glasses, dangling hair, hoodie strings, etc.
Line 54: Line 55:
 
** Cleanup with shop vac or brush
 
** Cleanup with shop vac or brush
  
* '''User''' (small group or individual training)
+
* '''Core Class 2''' (small group or individual training)
** Review all points above
+
** Review all core topics above
 
** Adjusting the table height
 
** Adjusting the table height
 
** Setting the vertical travel stops
 
** Setting the vertical travel stops
Line 65: Line 66:
 
** Consumables costs
 
** Consumables costs
  
* '''Expert''' (individual hands-on training)
+
* '''Core Class 3''' (individual hands-on training)
** Review all points above
+
** Review all core topics above
 
** Using brushes or sanders in the chuck
 
** Using brushes or sanders in the chuck
 
** Making fixtures for repeating hole locations
 
** Making fixtures for repeating hole locations
 
** Making fixtures for workpiece clamping
 
** Making fixtures for workpiece clamping
  
* '''Trainer'''
 
** Expert level with sufficient experience
 
  
 
}}
 
}}
 
[[Category:Machine Shop]]
 
[[Category:Machine Shop]]

Revision as of 19:42, 10 November 2012

Rockwell Drill Press
"File:Rockwelldrillpress.jpg|Rockwell drill press photo" cannot be used as a page name in this wiki. [[Image:Rockwell drill press photo|175px| ]]
Name Rockwell Drill Press
Zone
Owner TBD
Make Model Rockwell 15-069 (1/2 HP motor)
Part Number 1721149
Date Acquired
Storage Location In the metal shop
Authorization Required
Status
Value
Documentation * Please read the drill press safety tips in the Rapidly-Rotating Scythe FAQ.
Other References TBD

Intro

It is used for drilling holes in a variety of materials (metal, wood, etc.).

Rules

  • Please wear safety glasses!

Instructions

  • Drill press accessories are kept on the plastic shelves on the other side of the bench grinders.

Maintenance Info

TBD

FAQ

TBD

Training

Each core class is a prerequisite for the next core class; the electives (if any) are optional.

  • Core Class 1 (group or individual trainingl)
    • Wood shop tour
    • Safety glasses, dangling hair, hoodie strings, etc.
    • Power switch location/operation
    • Workpiece materials compatible with this machine
    • Clamping the workpiece safely
    • How hard to push the drill bit into the workpiece
    • Marking an accurate hole location
    • Center punch / center drill to begin holes
    • Selecting drill bits
    • Changing drill bits
    • Cleanup with shop vac or brush
  • Core Class 2 (small group or individual training)
    • Review all core topics above
    • Adjusting the table height
    • Setting the vertical travel stops
    • Using a drill press vise
    • Dust control system
    • How to tell when a bit needs to be sharpened
    • Changing the drill speed
    • Using Forstner and other large (over 1/2 in) bits
    • Consumables costs
  • Core Class 3 (individual hands-on training)
    • Review all core topics above
    • Using brushes or sanders in the chuck
    • Making fixtures for repeating hole locations
    • Making fixtures for workpiece clamping

ToDo

Move to Wood Shop