Rockwell Drill Press

From i3Detroit
Revision as of 19:17, 7 November 2012 by Djscholl (Talk | contribs) (New draft section for training points)

Jump to: navigation, search
Rockwell Drill Press
"File:Rockwelldrillpress.jpg|Rockwell drill press photo" cannot be used as a page name in this wiki. [[Image:Rockwell drill press photo|175px| ]]
Name Rockwell Drill Press
Owner TBD
Make Model Rockwell 15-069 (1/2 HP motor)
Part Number 1721149
Date Acquired
Storage Location In the metal shop
Authorization Required
Other References TBD


It is used for drilling holes in a variety of materials (metal, wood, etc.).


  • Please wear safety glasses!


  • Drill press accessories are kept on the plastic shelves on the other side of the bench grinders.

Maintenance Info




Training Points (draft content to support Ted's shop training initiative)

  • Novice (must be supervised by user or higher level)
    • Wood shop tour
    • Safety glasses, dangling hair, hoodie strings, etc.
    • Power switch location/operation
    • Workpiece materials compatible with this machine
    • Clamping the workpiece safely
    • How hard to push the drill bit into the workpiece
    • Marking an accurate hole location
  • User
    • Review all points above
    • Center punch / center drill to begin holes
    • Selecting drill bits
    • Changing drill bits
    • Adjusting the table height
    • Setting the vertical travel stops
    • Using a drill press vise
    • Dust control system
    • Cleanup with shop vac or brush
    • How to tell when a bit needs to be sharpened
    • Consumables costs
  • Expert
    • Review all points above
    • Using brushes or sanders in the chuck
    • Changing the drill speed
    • Making fixtures for repeating hole locations
    • Making fixtures for workpiece clamping
  • Trainer
    • Expert level with sufficient experience