Sanford Surface Grinder
 |
This page contains historical information. It is provided for reference but does not reflect current information or policy. |
This page has been removed from search engines' indexes.
| Sanford Surface Grinder | |
|---|---|
| |
| Name | Sanford Surface Grinder |
| Zone | Machine Shop
|
| Owner | i3Detroit |
| Make Model | Sanford MG |
| Part Number | S/N 50.237 M |
| Date Acquired | 2010-01 |
| Date Departed | NO DATE DEPARTED |
| Storage Location | The surface grinder is installed in the south-west corner of the machine shop. |
| Authorization Required | No |
| Status | Departed |
| Value | $800
|
| Documentation | |
| Other References | |
Intro
This highly specialized grinder is really only useful for one thing: making a machined-flat surface on a ferrous workpiece even flatter.
Rules
- Training and careful operation are mandatory for the safety of the operator, the machine, and anyone working in the vicinity.
Instructions
- Even though this resembles a vertical mill, it is NOT operated like a vertical mill.
- Vertical mill training is not a substitute for surface grinder training.
