Sanford Surface Grinder

From i3Detroit
Revision as of 11:31, 10 November 2012 by Djscholl (Talk | contribs) (Initial contents of new page)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Sanford Surface Grinder
"File:sanford_surface_grinder.jpg|surface grinder photo" cannot be used as a page name in this wiki. [[Image:surface grinder photo|175px| ]]
Name Sanford Surface Grinder
Owner TBD, best contact is Steve Hermann
Make Model Sanford MG
Part Number S/N 50.237 M
Date Acquired
Storage Location The surface grinder is installed in the south-west corner of the machine shop.
Authorization Required
Documentation *
Other References *


This highly specialized grinder is really only useful for one thing: making a machined-flat surface on a ferrous workpiece even flatter.


  • Training and careful operation are mandatory for the safety of the operator, the machine, and anyone working in the vicinity.


  • Even though this resembles a vertical mill, it is NOT operated like a vertical mill.
  • Vertical mill training is not a substitute for surface grinder training.

Maintenance Info