From i3Detroit
Jump to: navigation, search

NEW TASKS, as of October 2011

Task Next Action Volunteer?
Clear Genie-width path to member storage
Construct and affix dry-erase marker holders to every whiteboard
Mount monitor on/near rack, for admin KVM usage
Consolidate adhesives/solvents/cleaners/etc and label
each location with pointers to the other locations
Bring blue bins down from attic and wash them all Matt O
Fridge cleanout Matt O
Affix QR codes to every tool with a wiki page
Cover roof openings, consider snow-melt drainage in your design
Level concrete near rack
Garage-door concrete
Winterization stuff (Bill putt suggested -- need more specifics)
North & East Storm windows Get measurements and figure hardware Steve H

OLD LISTS use for inspiration but move relevant tasks to new list above, please only copy the name, and reconsider the "next action" and secure a new volunteer.

Can be tackled immediately:

Task Next Action Volunteer?
Change thermostat batteries Determine what they take
Rewire laser exhaust on 230v Doublecheck SSR and PSU Joe
E-room pretty lights, wire to second switch. Install outlet, extend cord. Cherish
Clean blue bins
Craft room: Establish Cricut-stuff box Find and label suitable box
Kitchen: Label cabinets with contents who?
Kitchen: Fridge cleanout
Launder everything launderable
Welding area: Commission P&H welder Print a copy of the manual
Bike shop: Air feed Restring hose, mount manifold/regulator Nate B
Bike shop move bike shop to corner near water heater dustin
Shop: Redundant tools and rearrange Identify owners of redundant tools Nick
Tool area: Archive dubiously-useful hardware Find sturdy boxes for metal thingies
Defrag member storage Assemble majority of members Everyone!
Rebuild Donation-Sucker Clean shop-vac Nate B
Sweep and vacuum your butt off
Tape off emergency exit pathways Decide what those are
Photograph everything for insurance documentation Figure out where to store photos when done
E-room: Network jacks Test and trace existing wire Nate W
Security cameras Mount and wire Talk to Nate B
Cleaning supplies / flammables / etc Decide on scheme and implement, then label.
MSDS update Find binder!
Shop area: Run copper wire in dust collector hose Talk to Nick
Repair / upgrade selected 115V circuits Documentation: Breaker Panels Dave S
Mount and wire additional ceiling fans get it done before we all melt Brad
Small project Storage Move lockers and build additional storage locker units Brad
E-Room shelving Clean space, assemble units, place units and fasten to wall Brad
clean up First area clear benches, stow supplies in boxes Dustin/Ted

Just need supplies:

Task Next action / need Volunteer
E-room fluorescent lights, fix flicker Note type of ballasts, and obtain replacement(s)
E-room powerstrips Obtain another wall-mountable strip with switch
Welding curtains Need a pile of sticks and string and sketches Nate B
Cover and insulate roof-fan openings Needs foam, plastic, sticks, and plan. Nate B
Tool area: Sort electrical parts Just need some boxes... Nate B
Doorbell Easy Button not weatherproof. Find a button that is. Nate B
Craft-room bench cushion  ?
Craft-room table painting  ?
Floor gouge in FIRST area Quickrete
Garage door bottom seal Quickrete
Garage door side seals Identify and obtain appripriate thingies
Safety chain for theater lights Identify appropriate type of chain or cable
Lubricate Genie column Boe-Lube solid (MSC carries it) Nate B

Need approval, concept, or otherwise not immediately doable:

Task Needs Champion
Welding area: Store scrap metal Concept Nate B / Karen?
Whiteboard room lights Find a useful plug-in PIR outlet / Wattstopper perhaps? Nate B
Multizone audio Cohesive plan, mounting location, speaker wire?
Signage Is this idea still alive? Ross
Shower leak Assess problem, identify repairs needed
Security (PIR) sensors Need something to wire 'em back to Eric M?
Vending machine light Concept, wiring diagram...
Update website static pages Concept, see i3detroit-web group Nate B
Sign proposal Dustin
Outdoor light Concept, box, conduit, permit??