From i3Detroit
Jump to: navigation, search

NEW TASKS, as of October 2011

All this planning got you hungry? Head on over to the Foodie Page to get your feast planning on. Volunteer to bring your favorite dishes and show off your amazing culinary skills!

Task Next Action Volunteer?
Repair kitchen door hinge.
Clear Genie-width path to member storage
Construct and affix dry-erase marker holders to every whiteboard
Collect, test, and sort all dry-erase markers and populate above holders.
Purchase another few dozen Sharpies and put "i3" heatshrink bands
on them like the last batch.
See Nathaniel B for the right size heatshrink.
Costco usually has a good price on the Sharpies themselves.
Mount monitor on/near rack, for admin KVM usage
Consolidate adhesives/solvents/cleaners/etc and label
each location with pointers to the other locations
Bring blue bins down from attic and wash them all Matt O
Fridge cleanout Matt O
Affix QR codes to every tool with a wiki page
Cover roof openings, consider snow-melt drainage in your design
Level concrete near rack Joe
Garage-door concrete
Winterization stuff (Bill putt suggested -- need more specifics)
North & East Storm windows Get measurements and figure hardware Steve H
we need a stock rack/box in machine shop, 5"x5" by 12"deep eggcrate, about 12 holes,
1/4 ply, could be laser cut, ply frame. - Ask steve H
consolidate and shut down small black freezer
Run air hose to bike shop run black air hose to new bike shop area
add dividers to member storage shelves use tape or paint to divide the shelves into quarters
clean up FIRST area throw away junk and put all gear into bins below benches
sweep and vacuum your butt off everyone!
identify emergency exit routes and paint the lines we have floor marking paint, (update:picked up skinny rollers)
install other welding curtain talk to Nate B. he has vision for this
Fix bottom seal on garage door use quickrete to level ground
install safety chain on theatre lights get chain, or aircraft cable and crimpers
make bins/shelf for welding area metal storage
make a set of cubbies for storage of cut offs in metal shop area shelves should be 12-14 in deep
finish up audio system mount amplifiers in rack, mount speakers, run wire
hook up outdoor light outside main door
mount and wire security cameras talk to Joe B or Nate B about camera mount locations
Make boxes to store assorted tools in tool area identify tools which need boxes
refill handy bins talk to dustin about contents of handy bins
clean up library in loft consolidate books down
remove desk from whiteboard room
make a bin for casters and wheels put bin in consumables area
organize fastener area organize and label fasteners
build table for little sanblaster talk to dustin about getting the sandblaster set up
clean up and organize consumables area this is the wire rack near the tool crib w/tape, switches, etc
Label every trash can with the size of bags it takes, and purchase bags of each size.
Wash trash cans
Reroute all e-room bench equipment power cords to go behind shelf
(empty shelf, rip half an inch off its depth, remount it, reload it)
Label all E-room gear power cords (Many already done, follow example)
Repair / upgrade selected 115V circuits Documentation: Breaker Panels, Theater Lights Dave S

OLD LISTS use for inspiration but move relevant tasks to new list above, please only copy the name, and reconsider the "next action" and secure a new volunteer.

Can be tackled immediately:

Task Next Action Volunteer?
Change thermostat batteries Determine what they take
Rewire laser exhaust on 230v Doublecheck SSR and PSU Joe
E-room pretty lights, wire to second switch. Install outlet, extend cord. Cherish
Craft room: Establish Cricut-stuff box Find and label suitable box
Kitchen: Label cabinets with contents who?
Launder everything launderable
Welding area: Commission P&H welder Print a copy of the manual
Shop: Redundant tools and rearrange Identify owners of redundant tools Nick
Tool area: Archive dubiously-useful hardware Find sturdy boxes for metal thingies
Photograph everything for insurance documentation Figure out where to store photos when done
E-room: Network jacks Test and trace existing wire Nate W
Cleaning supplies / flammables / etc Decide on scheme and implement, then label.
MSDS update Find binder!
Mount and wire additional ceiling fans get it done before we all melt Brad
Small project Storage Move lockers and build additional storage locker units Brad
E-Room shelving Clean space, assemble units, place units and fasten to wall Brad

Just need supplies:

Task Next action / need Volunteer
E-room fluorescent lights, fix flicker Note type of ballasts, and obtain replacement(s)
E-room powerstrips Obtain another wall-mountable strip with switch
Welding curtains Need a pile of sticks and string and sketches Nate B
Cover and insulate roof-fan openings Needs foam, plastic, sticks, and plan. Nate B
Tool area: Sort electrical parts Just need some boxes... Nate B
Doorbell Easy Button not weatherproof. Find a button that is. Nate B
Craft-room bench cushion  ?
Craft-room table painting  ?
Floor gouge in FIRST area Quickrete
Garage door bottom seal Quickrete
Garage door side seals Identify and obtain appripriate thingies
Safety chain for theater lights Identify appropriate type of chain or cable
Lubricate Genie column Boe-Lube solid (MSC carries it) Nate B

Need approval, concept, or otherwise not immediately doable:

Task Needs Champion
Welding area: Store scrap metal Concept Nate B / Karen?
Whiteboard room lights Find a useful plug-in PIR outlet / Wattstopper perhaps? Nate B
Multizone audio Cohesive plan, mounting location, speaker wire?
Signage Is this idea still alive? Ross
Shower leak Assess problem, identify repairs needed
Security (PIR) sensors Need something to wire 'em back to Eric M?
Vending machine light Concept, wiring diagram...
Update website static pages Concept, see i3detroit-web group Nate B
Sign proposal Dustin
Outdoor light Concept, box, conduit, permit??