Revision as of 15:25, 9 June 2014 by Pajamapuma (added link to start-up procedure)
A vertical CNC machining center with 22" travel.
Must be on the list of operators to actually run the machine, but anyone can request a part to be cut.
Maintenance is performed by the operators Maintenance Procedures for Operators
Q. What types of files does the CNC support? A. The CNC itself only takes G-Code in a generic text file with an extension of ".txt".
Q. How do I generate g-code for the CNC? A. There are a couple of different ways. 1. Create a text file with the appropriate G & M Codes. There is a program reference guide on the shelves back by the machine. 2. Use a wizard to create the g-code for you. There are a couple of g-code generators listed in the useful links on the main page for the CNC Shop. 3. Use CAM software to create g-code from a 3D model. MasterCAM is available on the Design Workstation in the CNC area.
Q. What tips would you give in designing a part? A. Design your part with the knowledge that you will need to hold in some fashion while it is being cut. Without proper hold downs it will be very hard to cut you part accurately.
- A pricing structure needs to be established. This is to cover consumables used in making parts for members.
- Need to order a spare replacement Hella bulb so we have an extra on-hand. Oder info for: HELLA H83135211 24V 70W H3 bulb.
|Operator Name||Trained By|
|Paul Kerchen||Brian W.|
|Allen Majorovic||Brian W.|