Difference between revisions of "Torqcut CNC"

From i3Detroit
Jump to: navigation, search
(Changed the ownership amounts based on the cost of the repairs.)
Line 5: Line 5:
 
| Intro = A vertical CNC machining center with 22" travel.
 
| Intro = A vertical CNC machining center with 22" travel.
  
| Owner = Nate Bezanson (60%), Nick Britsky (23%), Brian Wennberg (17%)  
+
| Owner = Nate Bezanson (48%), Nick Britsky (18.5%), Brian Wennberg (18.5%), James Kemp (15%)  
  
 
| StorageLocation = In the center of the shop - it's the huge gray thing.
 
| StorageLocation = In the center of the shop - it's the huge gray thing.

Revision as of 10:28, 27 July 2012

Torqcut CNC
"File:Torqcut22.jpg|200px" cannot be used as a page name in this wiki. [[Image:Torqcut22.jpg|175px| ]]
Name Bridgeport Discovery Torq-Cut 22
Zone
Owner Nate Bezanson (48%), Nick Britsky (18.5%), Brian Wennberg (18.5%), James Kemp (15%)
Make Model Torq-Cut 22
Part Number
Date Acquired
Storage Location In the center of the shop - it's the huge gray thing.
Authorization Required
Status
Value
Documentation
Other References

Intro

A vertical CNC machining center with 22" travel.

Rules

Must be on the list of operators to actually run the machine, but anyone can request a part to be cut. This will be flushed out better once the tool chain is set up.

Instructions

You can write the instructions here. Or maybe add a link to another page or the user's manual.

Procedures

Maintenance Info

This will be left to the operators.

FAQ

A list of commonly asked questions

ToDo

In the final stages of being set up. Tool chain still needs to be defined.