Difference between revisions of "Vinyl Cutter-US Cutter Refine MH-720"

From i3Detroit
Jump to: navigation, search
(Added details to instructions. Cutter settings were from whiteboard.)
Line 4: Line 4:
 
| Instructions =  
 
| Instructions =  
 
#Design your sticker,sign, or shirt.  You will need access to vector graphics software to do this. (Illustrator, Coral Draw, Inkscape,or SK1)  
 
#Design your sticker,sign, or shirt.  You will need access to vector graphics software to do this. (Illustrator, Coral Draw, Inkscape,or SK1)  
 +
#Turn on cutter at the power strip and the red switch on its left side.
 +
#Set speed to 8 in/s and force to 30g
 +
#Vinyl feeds in from the back and out the front. (NF: Face-down, right?)
 
#Cut your vinyl.  
 
#Cut your vinyl.  
 
#Pay for the vinyl you cut ($1 per linear Foot sign vinyl and $2.50 per linear foot for shirt vinyl).
 
#Pay for the vinyl you cut ($1 per linear Foot sign vinyl and $2.50 per linear foot for shirt vinyl).

Revision as of 23:52, 24 November 2012

Vinyl Cutter-US Cutter Refine MH-720
PhotoNeeded.png
Name Purple Black Vinyl Cutter
Zone
Owner 100% Nick Briksy
Make Model
Part Number
Date Acquired
Storage Location
Authorization Required
Status
Value
Documentation
Other References

Intro

Rules

Instructions

  1. Design your sticker,sign, or shirt.  You will need access to vector graphics software to do this. (Illustrator, Coral Draw, Inkscape,or SK1)
  2. Turn on cutter at the power strip and the red switch on its left side.
  3. Set speed to 8 in/s and force to 30g
  4. Vinyl feeds in from the back and out the front. (NF: Face-down, right?)
  5. Cut your vinyl.
  6. Pay for the vinyl you cut ($1 per linear Foot sign vinyl and $2.50 per linear foot for shirt vinyl).
  7. Weed and apply transfer paper or apply to shirt with heat press.

Maintenance Info

FAQ

ToDo


Operator Name Skill
Rocco Marras Vinyl Guru Zone Warden
Nate Warnick ok
Dustin White pretty good
Bacon The leader of the Vinyl Revolution
Fireman Dave Master Vinyl Cutter