CNC light
| CNC light | |
|---|---|
| |
| Name | |
| Zone |
|
| Owner | i3Detroit |
| Make Model | Sonoff TH16 (modified) |
| Part Number | |
| Date Acquired | 2017-11-05 |
| Storage Location | over the CNC machine |
| Authorization Required | No |
| Status | Running |
| Value | 57.5 |
| IP Address | 10.13.107.75 |
| MAC Address | 5C:CF:7F:42:91:92 |
| Hostname | cnc-light |
| Documentation | https://github.com/arendst/Sonoff-Tasmota/wiki |
| Other References | |
Intro
50: Light 7.5: sonoff TH
Rules
Instructions
Maintenance Info
If uploading new software to this it needs three commands to be fully functional:
gpio4 9
gpio14 29
switchmode 3
I also had to make some hardware modifications (pictured) based on information from here
FAQ
ToDo
