Sandblaster

Sandblaster
Name	Sandblaster
Zone	Commons Area
Owner	i3Detroit
Make Model	MAC BLAST
Part Number
Date Acquired	2015-03
Storage Location	B side west wall just north of autozone.
Authorization Required	No
Status	Running
Value	$100
Documentation
Other References

Rules

• Always wear Safety glasses. There should be a respirator located to the right.

Instructions

• Place item in cabinet.
• Pull the air hose real from above welding or the kitchen wall over the entryway and attach to the air tank.
• Insure the compressor is on and all air valves are open.
• Adjust air pressure on regulator on the left leg under cabinet. (30-60psi is generally more than enough for light work)
• Turn on the work light (this will also turn on the shop vac)
• The foot switch controls the media flow.
• Expect to need to clear abrasive clogs repeatedly during operation.

Maintenance Info

Gun has replaceable components inside, rubber washer and orifice.

FAQ

• If the siphon hose is not sucking, check if the orifice is worn (9-9-15 the gun was reassembled, orifice was 60% worn and should be replaced soon)
• If no abrasive is coming out. Press the sprayer opening against your gloved hand, and activate the sprayer. This will create back pressure to clear any clogs.
• If there is still no abrasive after clearing the line of clogs, check the amount of sand in the hopper.

ToDo

• Reseal everything!
• Run air line drop from above.