Category:Tool Crib

Zone Information
Zone Name	Tool Crib
Status	Active
Zone Slogan	Makers Do It With Tools
Zone Committee Heads(s)	Florian Dutke
Zone Slack	#tool-crib
Zone E-mail	toolcrib@i3detroit.org
Zone Color	DeepPink
Paypal Button	Pay money to Tool Crib

Welcome to the Tool Crib! We have lots of hand tools (all shapes and sizes), a variety of cordless and corded electric power tools, several pneumatic power tools, various PPE and some consumables for the use of the members who are at the space working on projects. The zone is also the home to the former standalone Bike Zone (Orange Wall...you can't miss it). Lastly, the zone is also contains a large assortment of fasteners and hardware. Please remember to always return any tool pulled from the zone to its original home, and that includes any fasteners and hardware!

The above images, from left to right, are: Bike Zone, Fastener and Hardware Wooden Shelf Unit, Fastener and Hardware Large Storage Bins, Fasteners and Hardware Small Storage Bins, and Magnetic Parts Dishes and Fastener Measurement Tools.

The above images, from left to right, are: Combination Wrenches and Pliers and Channel Locks, Milwaukee Cordless Power Tool Wall, Sledges and Hammers and Mallets and Pipe Wrenches, Tool Crib Contribution Box, and Screwdrivers and Sockets and Saws.

The above images, from left to right, are: Accessories and Consumables Bins plus Sockets and Ratchets, Screwdrivers and Levels, White PPE Rack, Corded and Pneumatic Power Tools, and More Corded and Pneumatic Power Tools.

Here's an old YouTube video of an even older (circa 1950's) 35 mm animated film that describes various hand tools and how to use them properly. Enjoy!

• 28AP26: Pocket hole technology has been a game changer for some wood working projects. At i3 the wood shop has had a Kreg pocket hole jig mounted to a 13-inch by 16-inch piece of wood to help facilitate easy pocket hole executions. When searching the Tool Crib and Wood Shop zones, only a handful of pocket hole specific fasteners were found, plus the space lacked a long square drive bit to screw in those pocket hole screws. Well, good news! We now have a decent selection of pocket hole fasteners, a 675 piece set, plus two 6-inch long square drive bits, along with a backup pocket hole drill bit with stop collar. The current location of the pocket hole jig is in the open space below the drill press in the wood shop, the pocket hole fastener set is located on the wooden shelves in the Tool Crib, and the 6-inch long square drives and extra pocket hole drill bit/collar is located in the "Kreg Accessories" storage bin in the right hand alcove of the Tool Crib. The goal is to co-locate all of these items in a common location in the Tool Crib in the very near future. In the mean time, take a look at the latest capability of the space.

• 22AP26: Continuing the path of greater clarity through the use of high contrast labels, more of the existing long storage bins located in the right side alcove of the Tool Crib have received new identifying labels. A few more storage bins to go, but so far I would say that you should now be able to more quickly find what you're looking for. Now if I can only get everyone to return all tape measures to the storage bin that clearly states "Tape Measures Only". I also shifted over to where the Milwaukee cordless power tools are located, the 8 small red storage bins containing various drive bits (Phillips, slotted, square, Torx/star, hex, etc.). This should improve the workflow a little bit...grab your power tool, battery and bit(s) all without moving your feet. Yeah, I know, what about twist drills??? I'm working on it...baby steps.

• 22AP26: I have some good news and some okay news. First the good news! The Tool Crib has some additional fastener storage bins (another 32 in fact, clear Akro-Mils ones) mounted on a genuine Akro-Mils 36-inch wide by 19-inch tall louvered metal plate. Now for the merely okay news. Instead of locating the new mounting plate below the existing 2 mounting plates, I decided to go up above them. The advantage is that the new mounting plate does not interfere with the drawers of the old hardware store fastener storage system, the slight disadvantage is that you will need to use the small rolling ladder to get to the topmost bins. Did I say that the newest bins are clear? That way you can see if there is hardware in them. Oh, and the plan is to go straight to label maker printed labels for the new clear storage bins. Here are a couple of photos from the wall of storage bins, which now totals 104 bins! I have not started filling the bins because the next step is to figure what should go where.

• 15AP26: I sometimes wonder if good customer service still exists out there in the world. I am here to tell you that it still is! When I became the ZoCo for the Tool Crib I undertook a full inventory of all the tools contained in the zone. Most, if not all, tools were in good working order. However, I did notice that we only had two coping saws, with only one of them in working order. The other coping saw, a Stanley Works "FatMax" model was missing the end arm that holds one end of thin coping saw blade. I went to the Stanley Works website to see if there was the ability to order up a spare part for this saw. Unfortunately replacement parts were not available. The website did give me the option of making an inquiry to the customer service department, which I did. Stanley Works responded within a day or two seeking additional information such as the model number of the tool, and how long we had owned it. They also requested that I send along some photos for additional information. After a couple of rounds of emails, the customer service person concluded that a replacement part was not available, but in lieu of this, they would be sending me out a brand new FatMax coping saw instead, free of charge. I enthusiastically filled out a survey after the e-mail interactions were completed. Last weekend I added the new Stanley Works FatMax coping saw to the i3Detroit Tool Crib. Enjoy!

• 04AP26: There be hammers and mallets in their designated spots! The hammer and mallet section has always been more or less populated by hammers and mallets. However, a little order has been needed since some of the hammers will only go in certain positions due to the handle base being larger than the handle size at the top of the tool. I enlarged the left four most holes to accept a larger hammer handle and thus enable the largest hammer to be stored at the far left, followed by the next largest, etc. All ball-peen hammers are against the wall, while claw and rip hammers toward the front edge. Mallets are toward the right. All hammer and mallet positions are marked as well. I also enlarged the hole for the largest pipe wrench (gray one) so that it sits all the in, making it easier to collect it and return it.

• 02AP26: Courtesy of David H. and his efforts searching Kitts Offsite Warehouse Sale for items which the space might need, is a couple of new items for the Tool Crib. A medium sized dead blow hammer and another set of reusable hearing protection, aka ear muffs. Thanks David!

• 30MR26: Updated the overall Tool Crib image shown at the very top of the zone wiki, plus added 15 new photos that more or less completely display the entire contents of the Tool Crib, along with the Fastener and Hardware portions, and the Bike Zone wall.

• 28MR26: I spent some time over the last couple of days trolling through the dark and damp confines of Kitts Industrial Tools offsite warehouse, during their $2/lb. sale. I picked up the following: a couple of work aprons, an elastic back brace (small), some wooden handles for our existing file collection, some new files of various sizes and cross-sections, a couple of general purpose scissors, a couple of close quarters saws, a set of radius gauges, a hack saw, a fairly nice all metal square, a couple of 6-inch metal scales, and a metric 150 mm vernier caliper.

• 25MR26: Added links to operator manuals for all the Milwaukee cordless power tools/batteries/charger, plus a number of operator manual links for the corded power tools.

• 21MR26: Out with the old and in with the new. The Tool Crib currently has three (3) Milwaukee 18V 1/2-inch drill drivers. However, one of them had a chuck clutch that slips, hence the crude green masking tape markings. Coincidentally, one of our new members approached me after a Member Meeting to donate the value of a Home Depot gift card towards any tool that the Tool Crib needed. As a result of Joel's generosity, the Tool Crib is now in possession of a new Milwaukee 18V 1/2-inch Drill/Driver. During today's Potluck I went ahead and logged the information for the new drill/driver into the Tool Crib wiki. I also posted on the Stuff_Exchange Slack channel that Tool Crib has decommissioned the older drill/driver with the slipping chuck clutch. Free to a good home. It is on one of the shelves in the Graveyard. Frank A. was the first member to use the new drill/driver!

• 19MR26: The Fastener and Hardware wooden shelves have been more or less re-organized! Yay! Green masking tape and a Sharpie is the current marking scheme for whats what, but a more legible and permanent marking system is planned. There are a couple of wooden shelves with no items in them, but these may end up being removed to enable better hand access to the shelves below them. More to come on that.

• 14MR26 (Pi Day!): A partial re-organization of the Fastener and Hardware wooden shelves was undertaken. Approximately 75% complete. Heavier, and usually hard to see, items moved down from top most shelf. Lag bolts/screws now in bin on floor. Multiple bins containing brackets and hooks also on floor. Most shelves are now marked with the fastener or hardware contained on that shelf. Several shelves are still empty, as is a shelf still needing sorting. Several storage bins on the floor also need sorting.

• 13MR26: An complete inventory of the tools, equipment, spare parts, replacements and consumables located in the Bike Zone has been completed. Contained in the Tool Crib wiki is a couple of tables related to the Bike Zone: a list of the tools/equipment, and a list of parts/accessories/consumables. Items which show a "0" quantity denote that this item(s) was originally a part of the Bike Zone, but the item(s) was not discovered during the latest inventory. A minor re-organization of the wall mounted storage bins was also executed.

• 11MR26: Official contents of Park Tools AK-38 Advanced Mechanic Tool Kit from the Bike Zone was loaded into the Bike Zone inventory list to more quickly determine which tools are missing.

• 10MR26: Partial inventory of fastener drawers is underway. Each drawer that has been inspected has a note indicating the level of fastener fill (1/4, 1/2, 3/4, FULL or EMPTY) and whether the contents of the drawer match the affixed label (CORRECT or WRONG).

• 10MR26: Moved two blocks of the fastener drawer setup from atop the original layout of two columns to create a third column to the right. Now the contents of the fastener drawers can be inspected without the use of a step ladder.

• 07MR26: Wiped clean the available hard hats.
• 07MR26: Went through the storage box containing the existing stock of safety glasses. Disposed of any glasses that were scratched or damaged.

• 07MR26: Installed metal plate to attach several magnetic parts holders.
• 07MR26: Relocated the metric/standard thread checker strands.

• 06MR26: Installed new (old) Tool Crib sign reflecting the zone's updated slogan.

• Check if power tools are in working order --> Mostly complete, but still need to determine level of functionality to help determine whether to keep the tool or transfer it to the Graveyard.
• Repair corded electric circular saw foot plate (or replace the saw altogether).
• Repaint any mismatched tool silhouettes --> maybe not, but paint all vertical walls in zone to make it easier to see the various tools.
• Stash "extra" screwdrivers (how many PH1's do we really need on display?)
• (Re)paint zone tools in deep pink, or affix deep pink duct tape if simpler --> Obtained several rolls of pink duct tape and have started to mark hand and power tools needing it. --> This is mostly complete, but as always this is also an ongoing process and the pink tape comes off or the pink paint wears off.
• Make infographic about impact vs. non-impact bits.
• Make brief explainer poster for Milwaukee 4-mode drivers. --> I have created one, but now I need to decide how to display it.
• Clean and inspect PPE stock --> More or less completed in March 2026.
• Execute an inventory of the former Bike Zone to correctly reflect what is in the wiki, and obtain operator instructions for most of the bike tools if possible. --> Mostly completed March 2026.
• Expand the Milwaukee power tool holder/shelf unit. Probably by at least 2 slots. Plan is to get some scrap 3/4-inch plywood and put it together first and then pocket hole it into the wall.
• The right hand alcove contains a long storage tray titled "Allen Wrenches Unsorted" containing a lot of unsorted Allen wrenches, both metric and SAE. The goal is to find homes for all of these Allen wrenches in one of the 3 other long storage trays (Metric, SAE or Sets).
• Reorganization and Modernization

Task Name	Description	Priority	Champion
Paint Tools	There are still a bunch of tools not painted pink (or marked with pink tape).	1	Anyone can do this.
Missing Screwdrivers	Figure out which size screwdrivers are missing, paint any spares, and refill the wall(s).	1	Please?
Borrow-able Tools?	Proposed idea is mark some tools as able to be borrowed (or assemble a new set of tools for the same purpose), people are allowed to borrow those by posting in something like #borrowable_tools, when its been borrowed, for how long they expect to borrow it, and when they expect to return it. The rules would be posted, and anything people want to borrow but isn't on the list can be discussed.	3	Mtfurlan (talk)
Regular Power Tool Check	On a semi-regular basis (say quarterly or possibly twice a year or even during Pot Lucks), check out each power tool for functionality, wear and tear, missing parts, etc. Tag any power tool with an issue (and update the wiki to reflect its new status), otherwise the tool will be deemed to be okay for use by the membership.	2	Anyone, with support from the ZoCo

No equipment in zone 'Tool Crib' has todos

Please list any tools, and/or consumables, you think we may be lacking, include quantities for things relevant to that tool/consumable and links, if available.

• T20 long shank driver (not bit).
• Both style de-burring tool. The Tool Crib currently has a cone style deburring tool.
• Step drills and conical drills.
• Countersinking drill bit set.
• Brad point drill bits (a set?).
• Drill bit kits/sets, fractional, for wood.
• Drill bit kits/sets, fractional, for metal.
• Standard style Allen wrenches (full set, both).
• Milwaukee cordless trim router --> Would be Woodshop specific, pricey.
• Straws for sprayers??? --> Paint Zone item???
• Replacement combination wrenches. What sizes are missing?
• Pozidriv screwdrivers and bits (one set).
• Better spade bits (especially larger 1-1/4" and 1-3/8").
• 50 ft nylon fish tape.
• Additional coping saws --> One new coping saw added as of 03MR26. Investigating repair of existing coping saw. Broken Stanley coping saw replaced with new one in April 2026.
• Add a flush trim saw --> A 6.5-inch flush trim saw added as of 03MR26.
• Replenish the sanding paper sheet stock. Research the grits required. Determine the appropriate usage costs for a single sheet.
• Replace the existing 3-drawer sanding paper storage bin with something more easily used.
• Replenish the stock of wood and/or general purpose screws, especially in smaller lengths.
• A couple of Vise Grip style wrenches. Investigate Vise Grip and Milwaukee brands for best bang for the buck.
• Marking tools...bulk flat carpenter pencils (laser i3Detroit onto them as a way of holding on to them).
• Purchase a collection of metric fasteners, M3, M4, M5 and M6 to start. Per Nate B. suggestion a metric set should include the following: nut, lock nut, washer, and various lengths of fastener.
• Replace most of the old, dusty and crusty ear muffs.
• Purchase a rivnut tool and a selection of compatible rivnuts, for both metric and SAE threads.

Also check out our wishlist for specific tools and storage bins that we could use.

The Tool Crib generally consists of tools (hand and powered) that did not require a substantial capital investment to purchase them. However, if you add up all of the tools contained within the Tool Crib, the total cost would be substantial, albeit with some amount of depreciation over time that is. The Tool Crib wiki has been improved to the point that virtually each and every tool has been identified and accounted for, but since there are so many tools, and their capital costs are more or less minimal, none of tools have been cataloged for the "Table of Equipment" listing. This is why when you look through the "Table of Equipment" wiki you will not find a single entry for the Tool Crib. Also, the tools contained in the Tool Crib DO NOT require authorization prior to usage, but if you are unfamiliar with how a particular tool operates, check to see if the wiki listing contains a link to the operator manual, or check with someone in the space if they happen to know how to use the tool properly, or pop a question into the #tool-crib Slack channel. Of course, there is always YouTube.

Equipment	Authorization	Owner	Status
Tool Crib Tools and Equipment - ALL	No	i3Detroit, Nate Bezanson, Amelia Meyer, Greg Smith, Ted Hansen	Running

Please be aware, at this time, that hand tools and power tools from the i3 Tool Crib are NOT available for loan and are NOT to be removed from the space without the express written consent of the Tool Crib Zone Coordinator.

NOTE: If you see a small (pdf) logo next to the tool's "Part Number", it means that the "Part Number" has a link to the Operator Manual for that tool located on that particular tool manufacturers website.

NOTE: The tools (hand, power or pneumatic) found in the Tool Crib do NOT require authorization (i.e., training) to operate. However, if you are not familiar with how to safely operate a specific tool, check the wiki to see if the tool (especially the power and pneumatic tools) have an operator manual link. You can also ask another member if they have any experience with a particular tool and whether they can share their insight into the proper operation of that particular tool.

NOTE: If ANY tool has failed or was inoperable before you even went to use it, make sure it has been identified as such. The zone has green masking tape which can be used minimally wrap the tool, which you can then mark it as non-functioning. I would then request that you communicate the broken tool issue in the zone's Slack channel # tool-crib as soon as possible so that the broken tool can either be repaired or replaced.

Qty	Brand	Part Number	Serial Number	Description	Owner	Status	Location
1	Milwaukee	2962-20	L79AR244503778	IMPACT WRENCH, 1/2-inch Friction Ring Mid-Torque, 18V	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	2967-20	N80AR244300967	IMPACT WRENCH, 1/2-inch Square Ring, 18V	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	2650-20	B55CD131206560	IMPACT DRIVER, 1/4-inch Hex 2-Speed, 18V	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	2850-20	Unknown	IMPACT DRIVER, 1/4-inch Hex, 18V	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	2904-20	M64AD221812910	HAMMER DRILL/DRIVER, 1/2-inch, 18V	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	3601-20	Unknown	DRILL/DRIVER, 1/2-inch, 18V	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	2606-20	Unknown	DRILL/DRIVER, 1/2-inch, 18V (Clutch slipping)	i3Detroit	Disposed	Graveyard
1	Milwaukee	3601-20	N66AH254903044	DRILL/DRIVER, 1/2-inch, 18V, Brushless (New)	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	2626-20	F40BD182709497	MULTI-TOOL, 18V	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	2352-20	G21A918154995	LED STICKLIGHT, 18V	i3Detroit	Working	Cordless Tool Wall
1	Unknown	Unknown	Unknown	LED ROUND LIGHT, 18V	i3Detroit	Working	Cordless Tool Wall
2	Milwaukee	48-11-1865	Unknown	BATTERY PACK, 18V, 6.0 Ah (108 Wh) Li-ion	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	48-11-1815	Unknown	BATTERY PACK, 18V, 1.5 Ah (27 Wh) Li-ion	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	48-11-1850	Unknown	BATTERY PACK, 18V, 5.0 Ah (90 Wh) Li-ion	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	48-11-1820	Unknown	BATTERY PACK, 18V, 2.0 Ah (36 Wh) Li-ion	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	48-59-1812	D63BD150325288J	BATTERY CHARGER, M12/M18	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	48-59-1812	D63BD1341189248G	BATTERY CHARGER, M12/M18	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	48-59-1812	D63D9234515602G	BATTERY CHARGER, M12/M18	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	48-59-1812	D63C9182972355G	BATTERY CHARGER, M12/M18	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	48-59-1812	D63DB202820215D	BATTERY CHARGER, M12/M18	i3Detroit	Working	Cordless Tool Wall
1	Milwaukee	48-59-1812	Unknown	BATTERY CHARGER, M12/M18	i3Detroit	Working	Cordless Tool Wall
1	Makita	DF030D	0090787Y	DRIVER/DRILL, 1/4-inch Hex 2-Speed, 10.8V	i3Detroit	Working	Cordless Tool Wall
1	Makita	BL1013	Unknown	BATTERY PACK, 10.8V (14 Wh) Li-ion	i3Detroit	Working	Cordless Tool Wall
1	Makita	DC10WA	630621-0	BATTERY CHARGER, 10.8V	i3Detroit	Working	Cordless Tool Wall

Qty	Brand	Part Number	Serial Number	Description	Owner	Status	Location
1	Black & Decker	7308	Unknown	Circular Saw, 7 1/4-inch Blade, 1.5 HP	i3Detroit	Working	TBD
1	J.C.Penney	1121B	Unknown	Circular Saw, 7 1/4-inch Blade, 10A	i3Detroit	Working	TBD
1	Milwaukee	6225	457247027	Portable Band Saw, 2-Speed Heavy Duty	i3Detroit	Working	TBD
1	Sears-Craftsman	315.172050	Unknown	Auto Scroller Saw, 3/4-inch, Variable Speed	i3Detroit	Working	TBD
1	Sears-Craftsman	315.10721	C7099	Scroller Saw, 5/8-inch, Variable Speed	i3Detroit	Working	TBD
1	Milwaukee	6142-31	H41AD1627 02772	GRINDER, 4 1/2-inch	i3Detroit	Working	TBD
1	Wagner	0503172	Unknown	Heat Gun, 1200 Watt, 10 A	i3Detroit	Working	TBD
1	DeWalt	DWD210G	Unknown	Drill, 1/2-inch VSR	i3Detroit	Working	TBD
1	Unknown	Black Housing	Unknown	Drill, 3/8-inch	i3Detroit	Working	TBD
1	Sears-Craftsman	Unknown	Unknown	Drill, 3/8-inch Industrial Variable Speed	i3Detroit	Working	--> Moved to Graveyard
1	Unknown	Green Housing	Unknown	Drill, 3/8-inch	i3Detroit	Working	--> Moved to Graveyard
1	Milwaukee	6753-1	0704104965	SCREW SHOOTER	i3Detroit	Working	TBD
1	Makita	HR2641 16.7	77252 Y	Rotary Hammer Drill, 1.0-inch	i3Detroit	Working	TBD
1	Makita	JR3050T	07 TBD	Reciprocating Saw, 11 A	i3Detroit	Working	TBD
1	Milwaukee	1675-1	413B403460655	HOLE HAWG, 1.0-inch, 2-Speed	i3Detroit	Working	TBD
1	Milwaukee	1675-1	Unknown	HOLE HAWG, 1.0-inch, 2-Speed	i3Detroit	Working, but crusty	--> Moved to Graveyard
1	GOXAWEE	1337C Type 5	Unknown	Die Grinder, 240 Watt, Multi-function	i3Detroit	Working	TBD
1	Hitachi	D13VF	C741930	Drill, 1/2-inch, in Case	i3Detroit	Working	TBD
1	Kett Tool Co.	KS-23 AM	15296	Panel/Drywall Saw in Case	i3Detroit	TBD	TBD
1	Hardin	VSP5	Unknown	Wet Polisher, Variable Speed, Includes Various Pads	i3Detroit	TBD	TBD

Qty	Brand	Part Number	Serial Number	Description	Owner	Status	Location
1	Central Pneumatic	91753/113	Unknown	High Speed Metal Saw	Ted Hansen	Working	TBD
1	Unknown	Unknown	Unknown	Metal Nibbler	Ted Hansen	Working	TBD
1	Viking Air Tools	V100	102017	In-Line Sander	i3Detroit	Working	TBD
1	DeWalt	DWFP12233	Unknown	Brad Nailer, 18 Gauge, 0.625 to 2.125-inch Range	i3Detroit	Working	TBD
1	HDX (Home Depot)	HDX123	Unknown	Pin Nailer, 23 Gauge, 0.5 to 1.0-inch Range	i3Detroit	Working	TBD
1	HDX (Home Depot)	HDXST9032	Unknown	Stapler, 18 Gauge, 1.25-inch	i3Detroit	Working	TBD
1	RIDGID	R138HPF	Unknown	Pin Nailer, 23 Gauge, 0.5 to 1.375-inch Range	i3Detroit	Working	TBD
1	HDX (Home Depot)	HDXFN64	Unknown	Straight Finish Nailer, 16 Gauge, 1.0 to 2.5-inch Range	i3Detroit	Working	TBD
3PC Set	Harbor Freight	Unknown	Unknown	1/2-inch Impact Wrench, 3/8-inch Ratchet, 1/4-inch Die Grinder	i3Detroit	TBD	TBD
1	PSI Woodworking Products	ANK	Unknown	Air Nailer Kit, 18 Gauge, 10 to 44 mm Brad Length	Greg Smith	TBD	TBD

Qty	Brand	Part Number	Serial Number	Description	Owner	Status	Location
1	RIDGID	SeeSnake	Unknown	Micro Inspection Camera in Case	Eric Merrill	Unknown	TBD
1	Craftsman	Unknown	Unknown	Carpenter Level, 24-inch, with Laser Trac and Digital Readout	i3Detroit	Working	TBD
1	Zircon	73758	Unknown	Electronic Stud Finder, StudSensor i65	i3Detroit	Working	TBD
1	Pittsburgh (HF)	Unknown	Unknown	Digital Caliper, Composite, 6-inch	i3Detroit	Working	TBD
1	Black & Decker	BDL200S	Unknown	Laser Level (Red Housing)	i3Detroit	Unknown	TBD
1	Strait-Line	Unknown	Laser Level 30	Laser Level (Yellow Housing)	i3Detroit	Unknown	TBD

NOTE: The Original List no longer contains tools that are now reflected in three (3) new tables for corded, cordless and pneumatic power tools.

Quantity	Brand	Part Number	Description	Owner
1	Ryobi	P206	1/2-inch Drill	i3 --> possibly retired?
1	Ridgid	R86034	Impact Driver	i3 --> possibly retired?
1	Ridgid	R8611501	Hammer Drill	i3 --> possibly retired?
7	Ryobi	Unknown	18V NiCad Battery	i3 --> possibly retired?
1	Ryobi	P110	18V NiCad Battery Charger	i3 --> possibly retired?
1	Ridgid	R840093	Lithium/NiCad Battery Charger	i3 --> possibly retired?
1	Ridgid	R840085	18V Lithium Battery	i3 --> possibly retired?
1	Chicago Electric	95020	Electric Palm Sander	i3 --> possibly retired?
1	Craftsman	973.11137	Cordless Screwdriver	i3 --> possibly retired?
1	Rockwell	RK5140K	Oscillating Tool	Amelia Meyer --> possibly retired, missing or removed by owner?
1	Unknown	DM-11	Electric Engraver	i3
1	Dremel	395.5	Rotary Tool	i3
1	Alltrade	Unknown	Rotary Tool	i3
1	Proxxon	IBS/E	Rotary Tool	i3 --> Storage box exists but tool is missing...retire?
1	Ryobi	P501	Cordless Circular Saw	i3 --> possibly retired?
1	Rotozip	RZ20	Rotozip	Ted Hansen --> possibly retired, missing or removed by owner?
1	Porter Cable	PC600JS	Jigsaw	i3 --> possibly retired?
1	Skil	4690	Jigsaw	Steve Brook --> possibly retired, missing or removed by owner?
1	Chicago Electric	4042	Corded Circular Saw	Ted Hansen --> possibly retired, missing or removed by owner?
1	Ryobi	P512	Cordless Jigsaw	i3 --> possibly retired?
1	Craftsman	315.117151	Corded Belt Sander	i3 --> possibly retired?
1	Ryobi	P600	Cordless Router	i3 --> possibly retired?
1	Ryobi	P703	Cordless Light	i3 --> possibly retired?
2	Ryobi	P700	Cordless Light	i3 --> possibly retired?
1	Ryobi	JM82	Biscuit Joiner	i3 --> possibly retired?
1	Milwaukee	6519-30	Sawzall Reciprocating Saw	i3 --> possibly retired?
1	HDX	HDXST9032	18-Gauge 1.25" Pneumatic Stapler	i3 --> Moved to new table.
1	Cen-tech	Unknown	IR Thermometer	Len --> Auto Zone?
1	Central Pneumatic	47869	1/8" Air micro die grinder	Len
1	Chicago Electric	CP874	Cut-off tool	i3
1	Central Pneumatic	66871	Touchup Air Spray Gun	i3 --> Possibly retired or in another zone?
1	Central Pneumatic	96661	Pneumatic Nibbler	i3

PPE (Personal Protection Equipment) is free to use and covered in your membership dues. Suggested donations for certain consumable items are labelled.

As of December 2025, most of these are located near Paint Zone behind the Genie, except for some safety glasses and gloves stored in the Tool Crib.

However, prior to using the PPE, it is highly recommended to remove any dust and inspect for damage.

Qty.	Brand	Part Number	Description	Location
2	N/A	N/A	Shop Aprons, Reusable (one blue and one white)	White PPE Hanging Bag
20	3M	8210	Respirator Masks, Disposable Particulate, N95
3	Unknown	Unknown	Hard Hats
1	MSA	Unknown	Respirator Mask, Reusable
2	Unknown	Unknown	Knee Pads (Pair)
6	Various	Unknown	"Reusable Hearing Protection" or "Ear Muffs"
500 pieces (new box)	Moldex	6645	Earplugs, Disposable
2	Unknown	Unknown	Arm Guards, Kevlar (Pair)	--> Missing?
A bunch	Various	N/A	Work Gloves
A bunch	Various	N/A	Grippy Gloves
A bunch	Various	N/A	Safety Glasses, Various Styles	White PPE Hanging Bag
A bunch	Various	N/A	Safety Glasses, Replacement Stock, Various Styles	Storage Bin on Floor

This is currently an incomplete list of all of the hand tools contained in the Tool Crib. However, an inventory of the existing hand tools is currently being undertaken to correctly reflect the current state.

Qty.	Brand	Part Number	Description	Owner	Location
1	Klein Tools	70220	Impact Driver Set, Reversible	i3Detroit
1	Unknown	N/A	Dead Blow Hammer, Medium Size	i3Detroit	Hammer and Mallet Section
1	Thorsen	54 156	BIG, Really BIG Combination Wrench, 1 3/4-inch	i3Detroit
1	?	?	BIG, Really BIG Combination Wrench, ?-inch	i3Detroit
1	?	?	BIG, Really BIG Combination Wrench, ?-inch	i3Detroit
1	?	?	BIG, Really BIG Combination Wrench, ?-inch	i3Detroit
Set	Neiko Tools	02623A	Punches and Cold Chisels, 6 Each, Heavy Duty	i3Detroit
Bag	N/A	N/A	Rags	i3Detroit
1	Snap-on	Unknown	Torque Wrench, 1/4-inch Drive, 0 to 6-inch-lb	i3Detroit
1	Unknown	Unknown	Breaker Bar, ?-inch Drive	i3Detroit
1	Pittsburgh (HF)?	Unknown	Torque Wrench, Click Style, ?-inch Drive, ? to ? foot-lb	i3Detroit
1	Tooluxe	03703L	Torque Wrench, Beam Style, ?-inch Drive, 0-150 ft-lb	i3Detroit
?	Klein Tools	56206	Conduit Bender, 1/2-inch	i3 (Nick B?)	--> Missing?
1	Klein Tools	56207	Conduit Bender, 3/4-inch	Nate B
1	J.R. Richards Co.	1221	Conduit Bender, 1/2-inch	i3Detroit
1	Unknown	Unknown	Deburring Tool, Handheld	i3Detroit
1	Kreg		Pocket Screw Jig Set	Chris Allington (Greg?)	--> Wood Shop?
1	Unknown	Unknown	Sheet Metal Hole Punch Tool	i3Detroit
2	Unknown	Unknown	Finishing Trowel	i3Detroit	--> Missing?
?	Unknown	Unknown	Trowel, Grout	i3Detroit
?	Unknown	Unknown	Trowel, Big	i3Detroit
Lots	Various	N/A	Screwdrivers, Phillips	i3Detroit
Lots	Various	N/A	Screwdrivers, Slotted	i3Detroit
Set	Amartisan	Unknown	Multi-piece Magnetic Torx Screwdriver Set in Case (T5 to T40)	i3Detroit
Collection	Various	N/A	Combination Wrenches, Metric, 6 to 24 mm, inclusive	i3Detroit
Set	Unknown	N/A	Combination Wrenches, Metric, 8 to 22 mm, inclusive, some missing	i3Detroit
Collection	Various	N/A	Combination Wrenches, SAE, 1/4 to 7/8-inch, inclusive, some missing	i3Detroit
Set	Craftsman	N/A	Nut Drivers, Metric, 5 to 11 mm, inclusive	i3Detroit
Set	Craftsman	N/A	Nut Drivers, SAE, 3/16 to 1/2-inch, inclusive, 1 missing	i3Detroit
2	Unknown	Unknown	Crow Bars	Nate B.	--> Missing?
1	Craftsman	37330	Reverse Hook Flat Pry Bar, 15-inch	Nate B.?
1	Vaughan	Unknown	Flat Pry Bar, 15-inch Superbar	Nate B.?
1	Stanley	55-?	Flat Pry Bar, 12-inch Wonderbar	Nate B.?
1	Unknown	Unknown	Tire Mount/Demount Curved Spoon, 18-inch	i3Detroit
1	Unknown	No. 11	Pipe Threader, Morse with 1-inch, NF 14-pitch Die	i3Detroit
1	RIDGID	No. 31	Pipe Threader, 3-way w/40-inch Handle, 1/2, 3/4, and 1-inch Dies	i3Detroit
1	Unknown	Unknown	Claw Hammer, Curved, 16-ounce	i3Detroit	Hammer and Mallet Section
1	Work Horse	Unknown	Rip Hammer, 10-ounce with Hickory Handle	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Claw Hammer (Yellow and Black Handle)	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Claw Hammer (Black Handle)	i3Detroit	Hammer and Mallet Section
1	Vaughan	CF1	Claw Hammer, Framing, 20-ounce	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Claw Hammer, Curved, 7-ounce (Purple Handle)	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Claw Hammer (Orange Head)	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Ball Peen Hammer (Blue and Pink Handle)	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Ball Peen Hammer (Black Handle)	i3Detroit	Hammer and Mallet Section
1	Stanley	Unknown	Ball Peen Hammer (Black Handle)	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Ball Peen Hammer (Blue Head)	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Metal Working Hammer (Wood Handle)	i3Detroit	Hammer and Mallet Section
1	Steel Grip	Unknown	Tack Hammer, 5-ounce	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Rubber Mallet, Large, Black (Metal and Rubber Handle)	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Rubber Mallet, Large, Black (Wood Handle)	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Babbitt Mallet, Large, Non-Sparking	i3Detroit	Hammer and Mallet Section
1	Unknown	Unknown	Copper Headed Mallet, Large	i3Detroit	Hammer and Mallet Section
1	Vaughan	Unknown	Mallet, Soft Face, 6-ounce	i3Detroit	Hammer and Mallet Section
1	Kobalt	Unknown	Ball-Peen Hammer	Amelia Meyer	--> Missing?
1	True Temper	Unknown	Sledge Hammer, 12-pound, 36-inch Handle	i3Detroit
1	Unknown	Unknown	Sledge Hammer, 8-pound, 12-inch Wooden Handle	i3Detroit
1	Tekton	Unknown	Bolt Cutter, Large	i3Detroit
1	Unknown	Unknown	Bolt Cutter, 3-Hole Crimping, Large	i3Detroit
1	Reed Manufacturing	Unknown	Pipe Cutter, Large, Cuts 1/2 to 2-inch	i3Detroit
1	Stanley	Unknown	Back Saw, 12-inch	i3Detroit
1	Ace Hardware	Unknown	Hand Saw, 15-inch, General Purpose	i3Detroit
1	Unknown	Unknown	Coping Saw, 6-inch, Wooden Handle	i3Detroit
1	Stanley	FatMax	Coping Saw, 6-inch, Plastic Handle	i3Detroit	--> New
3	Unknown	Unknown	Standard Wood Saw	i3Detroit	--> in Woodshop?
?	Unknown	Unknown	Carpet Glue Roller	i3Detroit
?	Unknown	Unknown	Ductwork Crimper	i3Detroit
?	Unknown	Unknown	Screwdrivers, Long Handled	i3Detroit
2	Irwin, Stanley	Unknown	Chalk Line Reel	i3Detroit
3	Unknown	Unknown	Pipe Cutter	i3Detroit
?	Unknown	Unknown	Stud Remover Set	i3Detroit
?	Unknown	Unknown	Nipple Remover Set	i3Detroit
Tray	Unknown	Unknown	Punches, Several Types and Sizes	i3Detroit
Tray	Unknown	Unknown	Files, Several Types and Sizes	i3Detroit
Tray	Unknown	Unknown	Rasps, Several Types and Sizes	i3Detroit
?	Unknown	Unknown	Pry Bars	i3Detroit
?	Unknown	Unknown	Allen Keys	i3Detroit
?	Unknown	Unknown	Allen Key Sets	i3Detroit
?	Unknown	Unknown	Knives, Utility and Other Types	i3Detroit
Tray	Unknown	Unknown	Impact Sockets	i3Detroit
Tray	Unknown	Unknown	Non-impact Sockets, Metric and SAE, 1/4-inch, 3/8-inch, and 1/2-inch Drive	i3Detroit
Tray Bin	Various	Various	Ratchets, 1/2-inch, 3/8-inch, and 1/4-inch Drive	i3Detroit
Tray Bin	Various	Unknown	Wire Brushes	i3Detroit
Tray Bin	Various	Unknown	Wire Wheels/Cups	i3Detroit
2	Unknown	Unknown	Drywall Saws	i3Detroit
Tray Bin	Various	Unknown	Hole Saws, Multiple Diameters	i3Detroit
1	Arrow Fastener	56500-6	Stapler, Orange Easy Shot Decorating	i3Detroit
1	Arrow Fastener	T50D	Stapler Gun, Heavy Duty	i3Detroit
1	Arrow Fastener	HT50	Stapler, Hammer Tacker	i3Detroit
1	DeWalt	DWHT80276	Stapler, Carbon Fiber Shell	Nate B.
1	Stanley	TR110	Stapler Gun, Heavy Duty	i3Detroit
Tray Bin	Various	Unknown	Wood Chisels	i3Detroit
Tray Bin	Various	Unknown	Cold Chisels	i3Detroit
Tray Bin	Various	Unknown	Putty Knives	i3Detroit
1	Unknown	PW-24	Pipe Wrench, 24-inch, Alloy, Max 3.0-inch Jaw Opening	i3Detroit
1	Husky	N/A	Pipe Wrench, 18-inch, Max 2.5-inch Jaw Opening	i3Detroit
1	Pittsburgh (HF)	Unknown	Pipe Wrench, 14-inch, Max 2.5-inch Jaw Opening	i3Detroit
1	Unknown	Unknown	Pipe Wrench, Swedish Style (Orange)	i3Detroit
?	Unknown	Unknown	Pipe Wrench, 8-inch	i3Detroit	--> Missing?
1	Unknown	Unknown	Pipe Wrench, Stillson, 14-inch	i3Detroit
1	Unknown	Unknown	Strap Wrench	i3Detroit
?	Unknown	Unknown	Cable Cutters	i3Detroit	--> Missing?
1	FastenPro	38353	Hand Riveter Set, 10-inch	i3Detroit
1	Sears-Craftsman	97473	Riveter, Right Angle, Heavy Duty	i3Detroit
?	Unknown	Unknown	Tin Snips	i3Detroit
1	Unknown	Unknown	Tongue-and-Groove Pliers, 10-inch	i3Detroit
1	Ryobi	Unknown	Tongue-and-Groove Pliers, 10-inch, Quick Adjust	i3Detroit
1	Ryobi	Unknown	Tongue-and-Groove Pliers, 8-inch, Quick Adjust	i3Detroit
1	Unknown	Unknown	Slip Joint Pliers	i3Detroit
1	Stanley	87-367	Adjustable Wrench, 6-inch	i3Detroit
1	Craftsman (Sears)	44602	Adjustable Wrench, 6-inch	i3Detroit
1	Unknown	Unknown	Adjustable Wrench, 8-inch	i3Detroit
1	Crescent	Unknown	Adjustable Wrench, 6-inch	i3Detroit
1	Unknown	Unknown	Adjustable Wrench (Orange), 6-inch	i3Detroit
1	Task Force	Unknown	Adjustable Wrench, 8-inch	i3Detroit
1	Master Mechanic	Unknown	Adjustable Wrench, 14-inch	i3Detroit
1	Harbor Freight	Unknown	Locking Pliers, 15-inch Long Reach	i3Detroit
1	Husky	Unknown	Needle Nose Pliers, Large	i3Detroit
1	Unknown	Unknown	Needle Nose Pliers, Medium	i3Detroit
2	Unknown	Unknown	Needle Nose Pliers, Small	i3Detroit
1	Unknown	Unknown	Lineman's Pliers, Snub-nose, Medium	i3Detroit
1	Unknown	Unknown	Lineman's Pliers, Snub-nose, Small	i3Detroit
1	Kobalt	Unknown	End-Cutting Pliers, Medium	i3Detroit
1	Knipex	86 01 250	Adjustable Pliers Wrench, 10-inch	Nate B.
1	TsunoDA	PLC-200GUB	Ultra Thin Hold Pliers, Bent Type, 200 mm	Nate B.
?	Unknown	Unknown	Wire Strippers	i3Detroit	--> Missing?
Tray Bin	Various	Unknown	Tape Measures, Metric, SAE, or Both	i3Detroit
Tray Bin	Various	Unknown	Scales, Rulers and Wooden Folding Carpenter Ruler	i3Detroit
2	Unknown	Unknown	Calipers	i3Detroit
1	Malco	C5	Pipe Crimper, 5 Blade	i3Detroit
1	Craftsman	Unknown	Edge Utility Cutter	i3Detroit
1	Unknown	Unknown	Edge Utility Knife	Nate B.
1	Milwaukee	48-22-4537	Aviation Snips, Straight, Long Cut	i3Detroit
1	BGS?	50620?	Universal Scissors	i3Detroit
1	Unknown	Unknown	Pruning Scissors	i3Detroit
1	KumfortKut	Unknown	Scissors (Red Handle)	i3Detroit
1	Unknown	Unknown	Scissors (Blue Handle)	i3Detroit
3	Harbor Freight	Unknown	Multipurpose Kitchen Scissors (Black Handles)	i3Detroit
?	Unknown	Unknown	Hose Cutters	i3Detroit	--> Missing?
?	Unknown	Unknown	Dremel Bit Set	i3Detroit
1	Pittsburgh (HF)	71138	Coping Saw, 6-inch	i3Detroit
1	Pittsburgh (HF)	71141	Flush Cut Saw, 6.5-inch, w/17 TPI Blade	i3Detroit
1	Stanley	H1297	Aluminum Carpenter Level, 24-inch	i3Detroit
3	Various	Unknown	Torpedo Levels	i3Detroit
Set	NEIKO	Unknown	Torx Sockets: T8-T60, T8H-T55H, and E4-E18 in Case	i3Detroit
Set	Allied	Unknown	Reversible Ratchet Driver Set w/Phillips, Torx, Hex and Slot Tips in Case	i3Detroit
1	Komelon	66221M	Open Reel Fiberglass Tape Measure, 200-ft/60-meter	i3Detroit
1	DeWalt	DWHT34028	Open Reel Fiberglass Tape Measure, 100-ft	i3Detroit
1	Unknown	Unknown	Rolling Measuring Wheel	i3Detroit
1	Ideal	31-056	Fish Tape, Tuff-Grip Pro Blued Steel, 120-ft x 1/8-inch	i3Detroit
1	Ideal	Unknown	Fish Tape, Unknown Length (Blue Housing)	i3Detroit
1	Unknown	Unknown	Fish Tape, Unknown Length (Red Housing)	i3Detroit
Assortment	Holo-Krome/Allen	No. 610	SAE Allen Wrenches in Case	i3Detroit
2	Great Neck	No. 50	Hack Saw, Adjustable Frame, 10 or 12-inch	i3Detroit
1	Lenox	4012	Hack Saw, Fixed Frame, 12-inch	i3Detroit
1	Stanley	15-160	Hack Saw, Adjustable Frame, 8 or 10 or 12-inch	i3Detroit
Kit	Unknown	Unknown	Ratchet Pipe Threader Kit-1/2, 3/4, and 1-inch NPT in Case	i3Detroit

We have a tool box of locksmithing stuff containing the following items. NOTE: This is NOT an all inclusive list.

• Repining kit
• Book on locksmithing
• Several locks/cores + keys
  • Several utility locks
  • Old moneybox locks
  • Spare moneybox locks
  • Spare vending machine locks
  • Non-latching electrical connection locks
  • A few cores that probably fit doors and such
• Key blanks (mostly automotive, but has some SC1, KW1, and assorted Yale)
• Lock picks
• Bump keys for SC1 and KW1

We don't currently have a way to cut keys, but we do have grinders, and bitting measurements are public information.

Please do not remove any of the locksmithing item from the tool box. Take the entire tool box with you if you're working on something.

Resources

• https://www.ilco.us/support/resources

• The Bicycle Shop or Bike Zone was a standalone zone at i3 until 2022 or 2023, when it was subsequently merged into the Tool Crib zone.
• The Bike Zone "zone color" was Orange, obviously.
• A number of the tools and equipment contained in the former Bike Zone were/are made by the Park Tool Company.
• The Park Tool Company has helpful YouTube videos (https://www.youtube.com/@parktool) and repair articles (https://www.parktool.com/en-us/blog/repair-help).

NOTE: If you see a small (pdf) logo next to the tool's "Part Number", it means that the "Part Number" has a link to the Operator Manual or Instructions for that tool located on that particular tool manufacturers website.

Qty.	Brand	Part Number	Description	Location
1	Blackburn	Air Tower 1	Floor Pump	Bike Zone Wall (Orange)
1	Pittsburgh (HF)	66488	Chain Breaker, Heavy Duty	Bike Zone Wall (Orange)
1	Quibaok	SN-48B	Ratcheting Crimping Tool	Bike Zone Wall (Orange)
1	Empire Tools	27912	Stainless Steel Protractor	Bike Zone Wall (Orange)
1	Empire Tools	2783	Pocket Caliper, Brass, 4-inch	Bike Zone Wall (Orange)
1	Park Tool	TW-5	Ratcheting Click-Style Torque Wrench in Case	Bike Zone Wall (Orange)
1	Park Tool	CT4.3	Master Chain Tool with Peening Anvil	Bike Zone Wall (Orange)
1	Park Tool	MLP-1	Master Link Pliers	Bike Zone Wall (Orange)
1	Park Tool	MLP-1.2	Master Link Pliers	Bike Zone Wall (Orange)
1	Park Tool	TW-2	Beam Style Torque Wrench, 0-70 Nm, 0-600 Inch-Pounds	Bike Zone Wall (Orange)
1	Park Tool	BBT-10	Adjusting Cap Tool	Bike Zone Wall (Orange)
1	Bontrager	Rollbar	Hex Wrench Set, Fold-up	Bike Zone Wall (Orange)
1	Park Tool	AWS-11	Hex Wrench Set, Fold-up	Bike Zone Wall (Orange)
1	Park Tool	SZR-1	Scissors	Bike Zone Wall (Orange)
1	Unknown	Unknown	Y Allen Wrench, 4, 5 and 6mm	Bike Zone Wall (Orange)
1	Park Tool	CN-10	Cable/Housing Cutter	Bike Zone Wall (Orange)
1	Park Tool	BT-2	Cable Tensioner ("third hand")	Bike Zone Wall (Orange)
0	Unknown	Unknown	Axle Wrench	--> Missing
1	Park Tool	HCW-5	Bottom Bracket Tool	Bike Zone Wall (Orange)
1	Park Tool	PW-3	Pedal Wrench	Bike Zone Wall (Orange)
1	Bike Hand	YC-501A	Chain Whip	Bike Zone Wall (Orange)
2	Prestacycle	Prestaflator	Bicycle Tire Inflation Tool	Bike Zone Wall (Orange)
2	Park Tool	CT-3.2/CT-1	Chain Breaker	Bike Zone Wall (Orange)
1	Bike Hand	YC-335	Chain Master Link Tool for Chains that have the Master Link Side Plates	Bike Zone Wall (Orange)
1	IceToolz	Unknown	Headset Bearing Cup Extractor	Bike Zone Wall (Orange)
1	Park Tool	SPA-1	Bottom Bracket Pin Spanner	Bike Zone Wall (Orange)
1	Park Tool	TS-8	Wheel Truing Stand	Bike Zone Wall (Orange)
1	Park Tool	PCS-10	Work Stand	Bike Zone Wall (Orange)
1	Unknown	Unknown	Tire Irons (Pedros plastic and misc)	Bike Zone Wall (Orange)
2	Unknown	Unknown	Spoke Wrenches	Bike Zone Wall (Orange)
0	Unknown	Unknown	Freewheel Removal Tool	--> Missing
0	Shimano	Unknown	Cassette Removal Tool	--> Missing
1	Park Tool	CM-5.2	Cyclone Chain Scrubber	Bike Zone Wall (Orange)
1	Park Tool	TM-1 (Tool)	Spoke Tension Gauge	Bike Zone Wall (Orange)
1	Park Tool	TM-1 (Chart)	Tension Meter Conversion Table	Bike Zone Wall (Orange)
1	Park Tool	AK-38	Advanced Mechanic Tool Kit with Contents Listed Below	Bike Zone Wall (Orange)
0	Park Tool	AWS-1	Hex Wrench Set, 4, 5, 6mm	--> Missing
0	Park Tool	AWS-3	Y Hex Wrench Set, 2, 2.5, 3mm	--> Missing
1	Park Tool	BBT-9	Bottom Bracket for 16 Notch External Crankset System Cups (SRAM, Shimano, FSA, etc.)	Bike Zone Wall (Orange)
1	Park Tool	BBT-22	Cartridge Bottom Bracket Tool (for 20 Tooth Internal Splines, such as Shimano, FSA, etc.)	Bike Zone Wall (Orange)
0	Park Tool	BO-2	Bottle Opener	--> Missing
0	Park Tool	CBW-1	Open End Wrench, 8 and 10mm	--> Missing
1	Park Tool	CBW-4	Open End Wrench, 9 and 11mm	Bike Zone Wall (Orange)
0	Park Tool	CC-3.2	Chain Checker Chain Wear Indicator	--> Missing
1	Park Tool	CL-1	Synthetic Blend Chain Lube	Bike Zone Wall (Orange)
1	Park Tool	CNW-2	Chain Ring Nut Wrench	Bike Zone Wall (Orange)
1	Park Tool	CWP-7	Compact Crank Puller for Splined Octalink, ISIS Drive, and Square-Taper Type	Bike Zone Wall (Orange)
2	Park Tool	FR-5	Cassette Lock Ring Tool for Shimano and similar brands	Bike Zone Wall (Orange)
1	Park Tool	FR-2	Free Wheel Remover, Suntour, 2-Notch	Bike Zone Wall (Orange)
1	Park Tool	GSC-1	Gear Clean Brush	Bike Zone Wall (Orange)
0	Park Tool	HT-8	Hex Tool, 8mm	--> Missing
2	Park Tool	PPL-1	PolyLube 1000 Ployurea Grease	Bike Zone Wall (Orange)
1	Park Tool	PW-3	Pedal Wrench	Bike Zone Wall (Orange)
1	Park Tool	PW-5	Pedal Wrench	Bike Zone Wall (Orange)
1 Each	Park Tool	SCW-13 to SCW-19	Professional Shop Cone Wrenches, 13mm to 19mm	Bike Zone Wall (Orange)
0	Park Tool	SD-0	Shop Screwdriver #0, Phillips	--> Missing
1	Park Tool	SD-2	Shop Screwdriver #2, Phillips	Bike Zone Wall (Orange)
1	Park Tool	SD-3	Shop Screwdriver, Flat Blade, 3mm Tip	Bike Zone Wall (Orange)
1	Park Tool	SD-6	Shop Screwdriver, Flat Blade, 6mm Tip	Bike Zone Wall (Orange)
1	Park Tool	SR-11	5 to 11-Speed Compatible Chain Whip/Sprocket Remover	Bike Zone Wall (Orange)
1	Park Tool	SW-0	Spoke Wrench (Black), 3.23mm	Bike Zone Wall (Orange)
2	Park Tool	SW-2	Spoke Wrench (Red), 3.45mm	Bike Zone Wall (Orange)
1	Park Tool	TB-2	Tire Boot	Bike Zone Wall (Orange)
2	Park Tool	TL-6	Tire Levers	Bike Zone Wall (Orange)
0	Park Tool	TWS-3	T10, T25, T30: Torx Compatible Three-Way Wrench	--> Missing
1	Park Tool	VP-1	Vulcanizing Patch Kit	Bike Zone Wall (Orange)

Qty.	Brand	Description	Location
Few	Various	Patch Kits
Several	Unknown	Brake Pads (Used)	Small Storage Bin on Wall
0	N/A	Bell	N/A
Several	Unknown	Reflectors (Front and Rear, Used)	Small Storage Bin on Wall
1	Unknown	Brake Mineral Oil
1	Rock Shox	High Performance Suspension Fluid
1	WD-40	Bike Lube
1	Finish Line	Wet Lube
1	Greendisc	Bio Chain Lube
1	Finish Line	Carbon Fiber Assembly Gel
1	Park Tool	PPL-1 Grease
1	Finish Line	Dry Bike Lubricant
0	Unknown	3-1 Oil	N/A
TBD	Stans	Tire Sealant
Several	Various	Tire Tubes (Multiple Sizes, New and Used))
TBD	Unknown	QR Skewers
Several	Unknown	Cables and Housing (New)	Upper Shelf on Wall
Several	Various	Spokes (New)	Upper Shelf on Wall
1	Unknown	Chains (Used)	Upper Shelf on Wall
Few	Unknown	Cassettes (Used)	Upper Shelf on Wall
Several	Unknown	Derailleurs (Used)	Small Storage Bin on Wall
Several	Various	Brakes (Used)	Small Storage Bin on Wall
Several	Various	Stems (Used)	Upper Shelf on Wall
Several	Various	Pedals (Used)	Upper Shelf on Wall
4	Various	Saddles (Used)	Upper Shelf on Wall
Several	Unknown	Seat Posts (Used)	Upper Shelf on Wall
Some	Unknown	Handlebar Tape (New)
0	N/A	Spare Wheels	N/A
0	N/A	Spare Tires	N/A

The Zone contains an appropriate selection of accessory items for both hand and power tools. These mostly include drive bit holders and various types of drive bits.

Description	Availability	Location
Hex Drive Bit Holders, Magnetic and Locking	TBD	TBD
Slotted Screwdriver Hex Drive Bits, Magnetic	TBD	TBD
Philips Screwdriver Hex Drive Bits, Magnetic	TBD	TBD
Philips PH2 Screwdriver Hex Drive Bits, Magnetic	TBD	TBD
Robertson (Square) Screwdriver Hex Drive Bits, Magnetic	TBD	TBD
Torx/Star Screwdriver Hex Drive Bit, Magnetic	TBD	TBD
Hex Screwdriver Hex Drive Bits, Magnetic	TBD	TBD
Socket Screwdriver Hex Drive Bits, Magnetic	TBD	TBD

The Zone also contains a select number of consumable items such as sand paper, saw blades and drill bits.

Description	Availability	Location
Sandpaper in Standard Sheets	TBD	TBD
Sandpaper in Various Rolls	TBD	TBD
Reciprocating/Sawzall Saw Blades, Various Sizes	TBD	TBD
Hack Saw Blades and Wires, 12-inches	TBD	TBD
Hack Saw Blades and Wires, 10-inches	TBD	TBD
Coping Saw Blades, 6-inches	TBD	TBD
Jig Saw Blades, Various Sizes	TBD	TBD
Twist Drill Bits for Wood, Various Sizes	TBD	TBD
Twist Drill Bits for Metal, Various Sizes	TBD	TBD
Drill Bits for Masonry, Various Sizes	TBD	TBD
Spade Bits for Wood, Various Sizes	TBD	TBD
Auger Bits for Wood, Various Sizes	TBD	TBD
Polishing Pads, Various Grits for Hardin Wet Polisher	Yes	Located in Clear Tub with Tool

Fasteners such as wood screws, sheet metal screws, deck screws, drywall screws, exterior grade screws, lag screws/bolts, machine screws, nuts, washers, brads, nails, staples, etc. can be found in left most section of the Tool Crib. There are three storage systems for these fasteners, one is the wooden shelf system underneath the window, just to the right of the wooden shelves are a set of hardware store style dispensing drawers, and the third are is perpendicular to the second area in a series of small plastic storage bins.

Qty	Description1	Description2	Availability	Location
Qty	Description1	Description2	Availability	Location

Resource (from the Bolt Depot website)

 https://boltdepot.com/Fastener-Information

Sharing the same space as the various fasteners of the Tool Crib are all sorts of hardware, such as: springs, grommets, plastic washers, o-rings, roll pins, brackets, picture frawe hardware, ball bearings, linear bearings, etc.

Qty	Description1	Description2	Status	Location
Qty	Description1	Description2	Status	Location