Embroidery Machine - Husqvarna Designer SE

From i3Detroit
(Redirected from Husqvarna Designer SE)
Jump to: navigation, search



Embroidery Machine - Husqvarna Designer SE
HusqvarnaDesignerSE.jpg
Name Husqvarna Designer SE
Zone Sewing Zone


Owner i3Detroit
Make Model Husqvarna Viking Designer SE
Part Number N/A
Date Acquired January 2014
Storage Location Craft Room, bench under exterior window
Authorization Required Yes
Status Running
Value 3000



Documentation The full set of Husqvarna printed documentation is on the bookshelf in the Craft Room. A number of electronic documents and a training disc with limited semi-video walkthroughs are also available.

Husqvarna maintains an official manuals site at http://manuals.husqvarnaviking.com/, with the User's Guide and Sewing Guide available under the Designer SE category.)

Other References

Intro

A combination sewing/computerized embroidery machine. This page also covers hoops, accessories, and software packages.

See also:

Rules

Training is required.

Instructions

See individual instruction pages in body

Maintenance Info

Vacuum under the bobbin after every use to keep machine free of lint. Per the sewing shop tech, the machine does NOT need oil. During everyday use, a user may need to perform several basic maintenance actions. Those are noted in the links above.

Service requiring removal of plastic casing should not be done by anyone other than the Husqvarna Viking technician. If security videos show work being done to the machine in this manner and problems are created as a result, you may be responsible for the $175 service call fee. Contact Jan Henry or Kevin Flory for issue requiring investigation and service, and a visit to the service center will be scheduled.

FAQ

What sizes are the embroidery hoops? What design size does the machine permit? What file format(s) are supported?

ToDo

Better documentation and investigation into the design/execution toolchain--scheduled to be handled by the Coordinators.

Coordinators: Regularly check bobbin cutting blade. Order new part from repair shop if damaged.

Coordinators: Regularly check for nicks/scratches in needle plate. Sand out as necessary. Similarly, nicks in feet should be sanded lightly to reduce the burrs.

Kevin: Rewrite maintenance page as maintenance + troubleshooting; add link to Husqvarna troubleshooting section of manual (http://www.husqvarnaviking.com/SiteMedia/Products/Machines/Support/Designer_SE_Troubleshooting_EN.pdf).

Anyone: List available hoop sizes

Authorized Users and Trainers

Trainer Name Certified Date


User Name Authorized By Date of Most Recent Training



|- |Jon Vaysman |Kevin Flory |2017/01/07


|- |Harpreet Mahal |Kevin Flory |2016/07/15


|- |Kim May |Kevin Flory |2016/10/20


|- |Jen Nagle |Kevin Flory |


|- |Bill Putt |Kevin Flory |


|- |Greg Good |Kevin Flory |2018/11/15 |- |Kevin Flory |2016/07/01

|- |Liz Cano |