|Make Model||? with Sonoff TH16 (modified)|
|Storage Location||Ceiling over sink|
If uploading new software to this it needs three commands to be fully functional:
mosquitto_pub -t "cmnd/i3/inside/commons/south-vent/GPIO4" -m "9" mosquitto_pub -t "cmnd/i3/inside/commons/south-vent/GPIO14" -m "29" mosquitto_pub -t "cmnd/i3/inside/commons/south-vent/switchmode1" -m "3"
I also had to make some hardware modifications (pictured) based on information from here