Search by property

Jump to navigation Jump to search

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "TODO" with value " * Make Controller for Automated Temperature Control ". Since there have been only a few results, also nearby values are displayed.

⧼showingresults⧽

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

    

List of results

  • MIG Welder - Hobart RC250  + ( * Find replacement for current adjustment rheostat. Range is too touchy, )
  • Laser Cutter - Cyclops  + ( * Get a honeycomb that we can set on the cutting table. * Get a handle on the metal cutting mode. )
  • Ceramics Kiln - Evenheat 5320  + ( * Get up and running again * Make Controller for automated temperature control )
  • Claptrap  + ( * Install 3D scanner software (???) * Install standalone transcription software ([https://handy.computer/ Handy] or [https://thewh1teagle.github.io/vibe/ Vibe] or [https://buzzcaptions.com/ Buzz] or something else) )
  • 3D Printer - Prusa MK3S/MMU2S  + ( * Light bar: ** Needs to be connected to … </br>* Light bar:</br>** Needs to be connected to relay, then powered from the 24VDC machine power supply.</br>** Relay needs to be connected to Raspberry Pi I/O for the OctoPrint Environment plugin to control</br>* Credentials for OctoPrint and Pi need to be put onto machine physically,. and/or shared with [[User:Agmlego|Amelia Meyer]]</br>* MMU2S filament spools need a better holder. Maybe something like a retracting winder?</br></br>* Evaluate if to sell machine or rework into third printer</br>o sell machine or rework into third printer )
  • SawStop Table Saw  + ( * make cutting fixtures and storage for saw things )
  • Male mannequin (Leonardo Decapitated)  + ( * Make him some clothes so he's not so cold )
  • 3D Printer - Hacker H2  + ( * More permanent spool holder * Use printer more to confirm functionality and refine instructions * Confirm if octoprint can be used for this printer )
  • LR Mate 200iC Industrial Robot  + ( * Move the controller to the bottom of the cart * Cable routing & cleanup * Reinstall Force Sensor * Install Force Sensor calibration file * Install Force Sensor metal faceplate * Create faceplate adapter to allow mounting original tools )
  • Furnace: B North  + ( * Needs new motor ** Dayton 3M588A *** 1 … </br>* Needs new motor</br>** Dayton 3M588A </br>*** 1/15 HP </br>*** 1050 RPM</br>*** Frame 42Y</br>** https://www.grainger.com/category/motors/ac-motors/hvac-ac-motors/direct-drive-blower-hvac-ac-motors?attrs=Frame%7C42Y~~HP%7C1%2F15~~No.+of+Speeds%7C1~~RPM+Range%7C1%2C001-1%2C100&filters=attrs</br>* Needs new bottom sheetmetal</br>* New Thermostat</br> * Needs new bottom sheetmetal * New Thermostat )
  • Furnace: B Mid  + ( * New Thermostat )
  • Cricut Maker  + ( * Obtain a table (acquired, set up March 20) * Set up a computer with the software * Train trainers )
  • CNC Router  + ( * Officially approve this equipment to live in the CNC zone * Populate this wiki page with useful information )
  • Snack Shop Vending Machine  + ( * Paint the vending machine (It is currently primed from a long ago attempt at painting) )
  • Furnace: A South Retired  + ( * Pilot light won't stay lit, replace thermocouple * Or harvest for parts before pitching it )
  • Vacuum Former  + ( * Please create list of materials that can be used, with suggested suppliers * Basic tutorial & instructions would be helpful )
  • Convection Oven  + ( * Plumb in vent ducting after AC blast gate * Check if this belongs in New Elab for reflow )
  • 3D Printer - Printrbot  + ( * replace broken/damaged frame pieces (Ne … </br>* replace broken/damaged frame pieces (New parts are on the shelf next to the printerbot)</br>* put all the parts back together and make sure it still works</br></br>==Fantasy WishList==</br></br>* install Repetier Firmware</br>* add a display and rotary encoder for standalone operation</br>* build a Power Tower to hold PSU and spool</br>* build a Power Tower to hold PSU and spool )
  • Furnace: B South  + ( * Replace switch box on furnace )
  • Old Sandblaster  + ( * Reseal everything! * Run air line drop from above. )
  • Kyocera 4551ci  + ( * See if we can get our hands on updated firmware * Update scanning options to be more useful )
  • 3D Printer - Full Spectrum Pegasus Touch  + ( * Sell machine )
  • 3D Printer - Formlabs Form2 MelodicTapir  + ( * Sell machine )
  • Monarch Series 50 Model 16 Lathe  + ( * Thoroughly clean all surfaces ** Disman … </br>* Thoroughly clean all surfaces</br>** Dismantle gearboxes?</br>** Evaporust!</br>** Relubricate</br>* Pin crossfeed handle</br>* Make cover for belt tensioner</br>* Get/make new handle for disconnect</br>* Replace power indicator lamp</br>* Test all oiling tubes (after new pot)</br>* Clean under threading gearbox cover</br>* Exercise the power feed gear selector mechanism</br>* Re-grease bearings for gearbox (left side)</br>* Get (wishlist):</br>** Change gear for metric threading</br>** Collet chuck</br>** Taper attachment</br>** Steady rest</br>** QC tool holders that fit 1" bits</br>** magnetic parts trays</br>rs that fit 1" bits ** magnetic parts trays )
  • DIY Lil' CNC  + ( * Tie into shop dust collector * Fix the acme rods so that they have a flat on the end that is connected to the shaft couplers. )
  • Drone CI  + ( * Use slack and slack blame into some channel for announcements of pipeline status * Better way to edit server-side configuration (instead of re-creating the containers) )
  • 3D Printer - Rostock MAX  + ( *Automated display of per-print cost. *Cooling fan design/build. )
  • 3D Printer - Stratasys  + ( *Bring in rack mount computer to run the machine. *Find a source for consumables. *Determine what the materials costs are. *Write up maintenance procedures. *Write up procedures for use. )
  • Fabric Cutting Mat 5x10' and table  + ( *Create and hang reservations sign, rules sign for above table. *Make a reservation calendar in the CRM for the table. )
  • OMG Laser 100W JPT MOPA Fiber Laser  + ( *Create User Training Outline and Program … </br>*Create User Training Outline and Program</br>*Build Container box</br>*Acquire small file cabinet for storage under desk</br>*Autostart VLC on second monitor (RPi3)</br>*Add light to enclosure to help cameras</br>*Develop Final Rules</br>*Program a exhaust fan button to put by the machine</br>*Create a permanent mount for in-machine webcam</br>*Assemble black worktable</br>*Build a Deburring / engraving cleaning kit:</br>**Dremel with polishing compounds and polishing discs.</br>**Brass Black</br>**Wet Sand Paper</br>**Steel Wool</br>**Brass Brushes</br>**Stiff Bristle Brushes</br>**Machine Oil</br>**Burnishing Compound</br>**Nylon/Polyester Napkins</br>**Scotch Brite Die Grinder Pads (Or similar for use with dremel)</br></br>*Save up for Magnetic Tumbler</br>*Motorize focus knob for ease of use</br>umbler *Motorize focus knob for ease of use )
Retrieved from "https://i3detroit.org/wiki/Special:SearchByProperty/:TODO/*-20Make-20Controller-20for-20Automated-20Temperature-20Control"