Search by property

Jump to navigation Jump to search

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "TODO" with value " * Sell machine ". Since there have been only a few results, also nearby values are displayed.

⧼showingresults⧽

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

    

List of results

  • WOPR  + ( * Create a repo for Docker Compose configs )
  • Canon Projector  + ( * Figure out why it keeps saying it needs service * Replace south end of bracket end with more C-shaped beam clamps )
  • MIG Welder - Hobart RC250  + ( * Find replacement for current adjustment rheostat. Range is too touchy, )
  • Laser Cutter - Cyclops  + ( * Get a honeycomb that we can set on the cutting table. * Get a handle on the metal cutting mode. )
  • Claptrap  + ( * Get the 3D scanners working with this computer (Creality Otter freezes and Afinia3D doesn't produce usable files?) )
  • Ceramics Kiln - Evenheat 5320  + ( * Get up and running again * Make Controller for automated temperature control )
  • 3D Printer - Prusa MK3S/MMU2S  + ( * Light bar: ** Needs to be connected to … </br>* Light bar:</br>** Needs to be connected to relay, then powered from the 24VDC machine power supply.</br>** Relay needs to be connected to Raspberry Pi I/O for the OctoPrint Environment plugin to control</br>* Credentials for OctoPrint and Pi need to be put onto machine physically,. and/or shared with [[User:Agmlego|Amelia Meyer]]</br>* MMU2S filament spools need a better holder. Maybe something like a retracting winder?</br></br>* Evaluate if to sell machine or rework into third printer</br>o sell machine or rework into third printer )
  • Ceramics Kiln - Evenheat 4320  + ( * Make Controller for Automated Temperature Control )
  • SawStop Table Saw  + ( * make cutting fixtures and storage for saw things )
  • Male mannequin (Leonardo Decapitated)  + ( * Make him some clothes so he's not so cold )
  • 3D Printer - Hacker H2  + ( * More permanent spool holder * Use printer more to confirm functionality and refine instructions * Confirm if octoprint can be used for this printer )
  • LR Mate 200iC Industrial Robot  + ( * Move the controller to the bottom of the cart * Cable routing & cleanup * Reinstall Force Sensor * Install Force Sensor calibration file * Install Force Sensor metal faceplate * Create faceplate adapter to allow mounting original tools )
  • Furnace: B North  + ( * Needs new motor ** Dayton 3M588A *** 1 … </br>* Needs new motor</br>** Dayton 3M588A </br>*** 1/15 HP </br>*** 1050 RPM</br>*** Frame 42Y</br>** https://www.grainger.com/category/motors/ac-motors/hvac-ac-motors/direct-drive-blower-hvac-ac-motors?attrs=Frame%7C42Y~~HP%7C1%2F15~~No.+of+Speeds%7C1~~RPM+Range%7C1%2C001-1%2C100&filters=attrs</br>* Needs new bottom sheetmetal</br>* New Thermostat</br> * Needs new bottom sheetmetal * New Thermostat )
  • Furnace: B Mid  + ( * New Thermostat )
  • Cricut Maker  + ( * Obtain a table (acquired, set up March 20) * Set up a computer with the software * Train trainers )
  • CNC Router  + ( * Officially approve this equipment to live in the CNC zone * Populate this wiki page with useful information )
  • Snack Shop Vending Machine  + ( * Paint the vending machine (It is currently primed from a long ago attempt at painting) )
  • Furnace: A South Retired  + ( * Pilot light won't stay lit, replace thermocouple * Or harvest for parts before pitching it )
  • Vacuum Former  + ( * Please create list of materials that can be used, with suggested suppliers * Basic tutorial & instructions would be helpful )
  • Convection Oven  + ( * Plumb in vent ducting after AC blast gate * Check if this belongs in New Elab for reflow )
  • 3D Printer - Printrbot  + ( * replace broken/damaged frame pieces (Ne … </br>* replace broken/damaged frame pieces (New parts are on the shelf next to the printerbot)</br>* put all the parts back together and make sure it still works</br></br>==Fantasy WishList==</br></br>* install Repetier Firmware</br>* add a display and rotary encoder for standalone operation</br>* build a Power Tower to hold PSU and spool</br>* build a Power Tower to hold PSU and spool )
  • Furnace: B South  + ( * Replace switch box on furnace )
  • Old Sandblaster  + ( * Reseal everything! * Run air line drop from above. )
  • Kyocera 4551ci  + ( * See if we can get our hands on updated firmware * Update scanning options to be more useful )
  • Monarch Series 50 Model 16 Lathe  + ( * Thoroughly clean all surfaces ** Disman … </br>* Thoroughly clean all surfaces</br>** Dismantle gearboxes?</br>** Evaporust!</br>** Relubricate</br>* Pin crossfeed handle</br>* Make cover for belt tensioner</br>* Get/make new handle for disconnect</br>* Replace power indicator lamp</br>* Test all oiling tubes (after new pot)</br>* Clean under threading gearbox cover</br>* Exercise the power feed gear selector mechanism</br>* Re-grease bearings for gearbox (left side)</br>* Get (wishlist):</br>** Change gear for metric threading</br>** Collet chuck</br>** Taper attachment</br>** Steady rest</br>** QC tool holders that fit 1" bits</br>** magnetic parts trays</br>rs that fit 1" bits ** magnetic parts trays )
  • DIY Lil' CNC  + ( * Tie into shop dust collector * Fix the acme rods so that they have a flat on the end that is connected to the shaft couplers. )
  • Drone CI  + ( * Use slack and slack blame into some channel for announcements of pipeline status * Better way to edit server-side configuration (instead of re-creating the containers) )
  • 3D Printer - Rostock MAX  + ( *Automated display of per-print cost. *Cooling fan design/build. )
  • 3D Printer - Stratasys  + ( *Bring in rack mount computer to run the machine. *Find a source for consumables. *Determine what the materials costs are. *Write up maintenance procedures. *Write up procedures for use. )
  • Fabric Cutting Mat 5x10' and table  + ( *Create and hang reservations sign, rules sign for above table. *Make a reservation calendar in the CRM for the table. )
  • OMG Laser 100W JPT MOPA Fiber Laser  + ( *Create User Training Outline and Program … </br>*Create User Training Outline and Program</br>*Build Container box</br>*Acquire small file cabinet for storage under desk</br>*Autostart VLC on second monitor (RPi3)</br>*Add light to enclosure to help cameras</br>*Develop Final Rules</br>*Program a exhaust fan button to put by the machine</br>*Create a permanent mount for in-machine webcam</br>*Assemble black worktable</br>*Build a Deburring / engraving cleaning kit:</br>**Dremel with polishing compounds and polishing discs.</br>**Brass Black</br>**Wet Sand Paper</br>**Steel Wool</br>**Brass Brushes</br>**Stiff Bristle Brushes</br>**Machine Oil</br>**Burnishing Compound</br>**Nylon/Polyester Napkins</br>**Scotch Brite Die Grinder Pads (Or similar for use with dremel)</br></br>*Save up for Magnetic Tumbler</br>*Motorize focus knob for ease of use</br>umbler *Motorize focus knob for ease of use )
  • Laser Cutter - Wolverine  + ( *Develop a list of materials, with speed and power settings for various cutting depths. **[[pentest-report-1]] *Add bumpers under the lid. *Add stringer gas shocks so the lid does not slam shut. )
  • Kenmore 1503 Sewing Machine (Willow)  + ( *get actual picture *finish model number *add maintenance info *It's been so long, it needs oil points most likely and a test run )
  • Kenmore 385 Sewing Machine (Stitch)  + ( *List out what the stitches are. *What bobbin class is it? *Stitch #3 may not work. *Stitch #4 may not work. *Stitch #7 may not work. )
  • Singer 758 Sewing Machine (Bob)  + ( *Machine power plug connection seems a bit flaky. *Only has 1 foot *zig-zag pattern disc is the only one included. *Need additional bobbins. )
  • 4x8 Utility Trailer  + ( *Put a sign on the trailer that indicates usage rules. *Mount the spare tire to the tongue. )
  • Laser Cutter - Chinesium  + ( *Put in new Bed *Rewrite Smoothieware - Why? Seems to work? *air assist solenoid *air assist nozzle *replace power switch with sonoff pow *add flow switch *add door interlock *add max endstops *better laser focus )
  • Hossfeld 2 Universal Bender  + ( *Source more dies *Add a good pic to this page *Add the manual or a link to it *Maybe find some good videos and link them )
  • Laser Cutter - Full Spectrum  + ( *The focus slide could be redesigned for less flex. *Payment counter? *New roller design )
  • 3D Printer - Rostock MAX v3  + ( *Troubleshoot calibration issue, G29 command causes hang and code crash * Return to owner during FabLab reorganization )
  • Nortel GPSTM  + ( *Use distribution amplifier to route 10Mh … </br>*Use distribution amplifier to route 10Mhz/PPS to E-Room</br>*Front panel VFD wiring/software</br>*<s>Integrate with [http://www.ntpsec.org ntpsec]</s></br>*<s>Mount antenna</s></br>*<s>48-hour site survey</s></br>*<s>Add PPS output from marked via.</s></br>*<s>Rackmount case</s></br>survey</s> *<s>Add PPS output from marked via.</s> *<s>Rackmount case</s> )
  • GEMA (clone) powder coating system  + (-Get tubing for the other two canisters th … -Get tubing for the other two canisters that isn't already tainted with color. Not sure what size it is exactly, maybe about 1/2-3/4"</br></br>-Nozzle rinsing tube needs to be added in to the gun (this is one probable reason it was spurting powder) needs air washing over it from this port, probably also needs a separate regulator for adjustment. It's the only port on the gun with nothing currently attached. </br></br>-Open up electronics and verify and label which knob does Voltage and which does Amps</br></br>-Secure extra fuses so they aren't just floating in the box.</br></br>-While in the electronics, flip the wiring on the potentiometers so they make more intuitive sense when turning them. Currently turning left increases and right decreases.</br> </br>-Re-print the magnetic mounts with better filament, the PLA is starting to sag from temps in the space.s starting to sag from temps in the space.)
  • Powermatic Belt and Disc Sander (Model 30A)  + (1. <s>Add/enable dust collection sys … 1. <s>Add/enable dust collection system for the machine.</s> -- '''Done'''</br></br>2. Make a butterfly valve for the disc vacuum line.</br></br>3. Add disc and belt direction arrows.</br></br>4. Replace belt guard nuts with knobs for easier removal and replacement.</br></br>5. Replace missing and broken adjustment knobs.</br></br>6. <s>Add miter gauge to disc sander bed.</s> -- '''Done'''</br></br>7. <s>Find at i3 or buy heat gun for changing sanding discs.</s> -- '''Tool Crib'''at i3 or buy heat gun for changing sanding discs.</s> -- '''Tool Crib''')
  • Label Station  + (1. Short item label support 2. Add contact details to labels 3. New compact case 4. Send health info to homeassistant)
  • Laser Cutter - Bumblebee  + (;New cylinders to hold different lenses, … ;New cylinders to hold different lenses, </br>:...to make it easy and safe to change them without smudging or damage. Sector67 has indicated they may make some of these. (The existing cylinder has too narrow an opening for the lens that gives a long focal length. Its beam is so wide that it hits the lip and heats up the cylinder.)</br>;Payment-measuring timer.</br>:One way to do this would be to measure current to the machine and time how long it runs at laser-firing power. It would be good to put a button on the timer that would re-set it to zero.</br>:Another way, used at other spaces, is to use the "blow" output contact from the controller, which is meant to trigger the air-assist, in case bottled gas is being used for special cutting. </br></br>===Done===</br></br>;Payment box.</br>:Greg Smith made it.</br>;Laptop desk.</br>:Standing desk built by [[user:Dustinbikes|Dustin White]] & Ted Hansen.</br>;Aperture in the chassis, through which to thread the blue USB cable with a grommet.</br>:Instead, we discovered an exit under the machine and threaded it through that. [[user:Mattarnold|Matt Arnold]] used sugru on the side of the standing desk for a place to attach the end of the cable when unused.ce to attach the end of the cable when unused.)
  • GE EV Charger  + (Acquire replacement barrel lock with key for mounting hardware.)
  • Tandem kayak  + (Add a couple pulleys so the gearbox is reachable from the floor.)
  • Bench-Mounted Manual Metal Shear  + (Add a spring loaded hold down to the left (anvil) side)
Retrieved from "https://i3detroit.org/wiki/Special:SearchByProperty/:TODO/*-20Sell-20machine"