Search by property

Jump to navigation Jump to search

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "TODO" with value "Fix tensioner". Since there have been only a few results, also nearby values are displayed.

⧼showingresults⧽

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

    

List of results

  • Kenmore 1503 Sewing Machine (Willow)  + ( *get actual picture *finish model number *add maintenance info *It's been so long, it needs oil points most likely and a test run )
  • Powermatic Belt and Disc Sander (Model 30A)  + (1. <s>Add/enable dust collection sys … 1. <s>Add/enable dust collection system for the machine.</s> -- '''Done'''</br></br>2. Make a butterfly valve for the disc vacuum line.</br></br>3. Add disc and belt direction arrows.</br></br>4. Replace belt guard nuts with knobs for easier removal and replacement.</br></br>5. Replace missing and broken adjustment knobs.</br></br>6. <s>Add miter gauge to disc sander bed.</s> -- '''Done'''</br></br>7. <s>Find at i3 or buy heat gun for changing sanding discs.</s> -- '''Tool Crib'''at i3 or buy heat gun for changing sanding discs.</s> -- '''Tool Crib''')
  • Laser Cutter - Bumblebee  + (;New cylinders to hold different lenses, … ;New cylinders to hold different lenses, </br>:...to make it easy and safe to change them without smudging or damage. Sector67 has indicated they may make some of these. (The existing cylinder has too narrow an opening for the lens that gives a long focal length. Its beam is so wide that it hits the lip and heats up the cylinder.)</br>;Payment-measuring timer.</br>:One way to do this would be to measure current to the machine and time how long it runs at laser-firing power. It would be good to put a button on the timer that would re-set it to zero.</br>:Another way, used at other spaces, is to use the "blow" output contact from the controller, which is meant to trigger the air-assist, in case bottled gas is being used for special cutting. </br></br>===Done===</br></br>;Payment box.</br>:Greg Smith made it.</br>;Laptop desk.</br>:Standing desk built by [[user:Dustinbikes|Dustin White]] & Ted Hansen.</br>;Aperture in the chassis, through which to thread the blue USB cable with a grommet.</br>:Instead, we discovered an exit under the machine and threaded it through that. [[user:Mattarnold|Matt Arnold]] used sugru on the side of the standing desk for a place to attach the end of the cable when unused.ce to attach the end of the cable when unused.)
  • GE EV Charger  + (Acquire replacement barrel lock with key for mounting hardware.)
  • 3D Printer - AnyCubic Photon Mono M7 Max  + (Add Instructions, Training, Materials)
  • Tandem kayak  + (Add a couple pulleys so the gearbox is reachable from the floor.)
  • Bench-Mounted Manual Metal Shear  + (Add a spring loaded hold down to the left (anvil) side)
  • Husqvarna Designer 1 Sewing Machine  + (Add instructions Add picture Pay Paul for his mom Make a list of all accessories included)
  • User:William Kent/Sandbox  + (Add instructions Add picture Pay Paul for his mom Make a list of all accessories included)
  • Jet Drum Sander  + (Add outfield tables)
  • Stop the Bleed Kit  + (Add pictures, fill out this page.)
  • Embroidery Machine - Husqvarna Designer SE  + (Better documentation and investigation int … Better documentation and investigation into the design/execution toolchain--scheduled to be handled by the Coordinators.</br></br>Coordinators: Regularly check bobbin cutting blade. Order new part from repair shop if damaged.</br></br>Coordinators: Regularly check for nicks/scratches in needle plate. Sand out as necessary. Similarly, nicks in feet should be sanded lightly to reduce the burrs.</br></br>Kevin: Rewrite maintenance page as maintenance + troubleshooting; add link to Husqvarna troubleshooting section of manual (http://www.husqvarnaviking.com/SiteMedia/Products/Machines/Support/Designer_SE_Troubleshooting_EN.pdf).</br></br>Anyone: List available hoop sizesN.pdf). Anyone: List available hoop sizes)
  • Dayton 24" Brake  + (Build a stand and bolt it to the floor)
  • Parts Washer  + (Buy Fluid, we used 5-10 gallons of purple power last time, research concentration needed and dilute to appropriate cleaning ratio. <br> Add a oil pan warmer to heat cleaning liquid.)
  • Mitre Saw  + (Buy a better one. Supplement with a cold saw.)
  • Singer "Ultralock" Serger 14U34  + (Buy it a new power cord/pedal, because it must have left.)
  • Acer 1440G Lathe  + (Center Tailstock)
  • Singer 111W153 Industrial Sewing Machine  + (Clean and setup)
  • ArtSign JSM-40U Laser Cutter  + (Controller needs fixing/replacement. Foof/Brian need a couple round tuits.)
  • Panel Lights  + (Detailed instructions)
  • 2 Post Auto Lift  + (Determine maintenance schedule and populate this section better. Determine bolt torque requirements and obtain appropriate wrench if necessary.)
  • Avid CNC  + (Essential stuff * Order pendant)
  • Philips HeartStart OnSite AED  + (Expiration date is listed as December 2016.)
  • Sewing HVAC  + (Find and install line set covers. Seal hole for line set in exterior wall.)
  • Re:load Pro  + (Find out how this works (See PDF link in "Documentation"))
Retrieved from "https://www.i3detroit.org/wiki/Special:SearchByProperty/:TODO/Fix-20tensioner"