Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

• Tandem kayak  + (Add a couple pulleys so the gearbox is reachable from the floor.)
• Bench-Mounted Manual Metal Shear  + (Add a spring loaded hold down to the left (anvil) side)
• Husqvarna Designer 1 Sewing Machine  + (Add instructions Add picture Pay Paul for his mom Make a list of all accessories included)
• User:William Kent/Sandbox  + (Add instructions Add picture Pay Paul for his mom Make a list of all accessories included)
• Jet Drum Sander  + (Add outfield tables)
• Stop the Bleed Kit  + (Add pictures, fill out this page.)
• Embroidery Machine - Husqvarna Designer SE  + (Better documentation and investigation int … Better documentation and investigation into the design/execution toolchain--scheduled to be handled by the Coordinators.</br></br>Coordinators: Regularly check bobbin cutting blade. Order new part from repair shop if damaged.</br></br>Coordinators: Regularly check for nicks/scratches in needle plate. Sand out as necessary. Similarly, nicks in feet should be sanded lightly to reduce the burrs.</br></br>Kevin: Rewrite maintenance page as maintenance + troubleshooting; add link to Husqvarna troubleshooting section of manual (http://www.husqvarnaviking.com/SiteMedia/Products/Machines/Support/Designer_SE_Troubleshooting_EN.pdf).</br></br>Anyone: List available hoop sizesN.pdf). Anyone: List available hoop sizes)
• Dayton 24" Brake  + (Build a stand and bolt it to the floor)
• Parts Washer  + (Buy Fluid, we used 5-10 gallons of purple power last time, research concentration needed and dilute to appropriate cleaning ratio. <br> Add a oil pan warmer to heat cleaning liquid.)
• Mitre Saw  + (Buy a better one. Supplement with a cold saw.)
• Singer "Ultralock" Serger 14U34  + (Buy it a new power cord/pedal, because it must have left.)
• Acer 1440G Lathe  + (Center Tailstock)
• Singer 111W153 Industrial Sewing Machine  + (Clean and setup)
• ArtSign JSM-40U Laser Cutter  + (Controller needs fixing/replacement. Foof/Brian need a couple round tuits.)
• Panel Lights  + (Detailed instructions)
• 2 Post Auto Lift  + (Determine maintenance schedule and populate this section better. Determine bolt torque requirements and obtain appropriate wrench if necessary.)
• Avid CNC  + (Essential stuff * Order pendant)
• Philips HeartStart OnSite AED  + (Expiration date is listed as December 2016.)
• Sewing HVAC  + (Find and install line set covers. Seal hole for line set in exterior wall.)
• Re:load Pro  + (Find out how this works (See PDF link in "Documentation"))
• Edlund Drill Press  + (Fix tensioner)
• Singer 660 A202 Industrial Sewing Machine  + (Fix timing. August 2023)
• Brother cs6000i sewing machine  + (Get a power cord as it's missing. buy: Bobbin (4) https://www.brother-usa.com/products/sa156 (One is on machine.) SA156 buy: Walking Foot SA140)
• Kenmore Model 54 Sewing Machine (Violet)  + (Get new belt)
• Lightbulb load-box  + (Grab a photo! Add a fan and intake/exhaust grilles?)

• HAAS Training  + (Have fun with your new skill and make cool things.)

• Badger Universal Model 360 Airbrush  + (I need to take more photos and post them along with a link or two to some sort of airbrush how-to. I've never used one myself, so until I've accessed that content and played around with the airbrush, this page will remain a stub.)
• Walter's CNC Plasma Cutter  + (In the final stages of being set up. Tool chain still needs to be defined.)
• Rhino CNC Lathe  + (It is currently out of the shop for a retrofit. the controller is being replaced to allow it to run from Mach 3.)
• Babylock Evolve Serger  + (Jan to develop training program Make training kit Make machine dust cover Signage for cover Develop user fee structure)
• RFID entry system  + (Known esp rfid bugs (not reported to esp rfid because making test cases takes time) * a user badging in can scan as the previous user occasionally, so it says bad pin * doors crash a lot when reading the user list)
• OpenEVSE  + (Maybe replace the i2c cable with something better. There are parts to build another one that has not been completed.)
• Drafting/DrawingTableWithPowerLift  + (Might need plugging in.)
• Husqvarna Viking Sewing Machine Emerald 116  + (Missing parts were purchased so machine could be used and have been tested. No other tasks due at this time.)
• Tacsew T175 Blindstitch Machine  + (Need spool pin)
• AllRounder 150  + (Need to have controller built)
• DesignJet t1100ps  + (Needs a fitted cover, at some point. How-to list for printing patterns and posters on the roll paper at full size.)
• Juki DDL-5550N-7 Industrial Sewing Machine  + (New bobbin winder. Install manual knee lift to replace defective servo.)
• 3Doodler  + (None.)
• Hot Steam gravity fed iron  + (Perform monthly checks and maintenance.)
• Furnace: A North  + (Presently powered from the row-2 light circuit. Fix that?)
• PCB Mill  + (Procure a full set of the mill, routers, and drills. '''Restore spindle motor driver board to functionality''')
• X-Tronic 4000 Hot Air Rework Station  + (Pump is broken)
• Baby Lock Imagine Serger  + (Replace machine.)
• Welding Table  + (Replace with a proper layout table and a f … Replace with a proper layout table and a flat welding table w/ threaded anchor holes. Maybe a downdraft table too. 4x8 for the layout table, a couple of 4x4 welding tables that can be clamped together, 3x4 for the downdraft, ideally 3 of them, each with their own set of practice welders.ch with their own set of practice welders.)
• Kyocera 4551ci  + (Set up and get working.)
• Dishwasher  + (Set up and get working.)
• Scotsew Industrial Sewing Machine  + (Set up and get working.)
• Kenmore Dyemaster 2000  + (Setup and get running. Looks like a washing machine.)
• Embroidery Machine - Husqvarna Diamond Deluxe  + (Signage for hard cover)
• Tent  + (Some of the bent pieces could be replaced. Probably could use a good wash.)