The SSID is
i3detroit , there is no encryption, this is considered a feature (for the moment).
There is also an SSID of
i3detroit-wpa with encryption; the passphrase is on posters with QR codes scattered about the space.
The old SSIDs of
i3test are deprecated, and they will be going away soon.
Internally, we are using the 10.13.0.0/16 supernet. It should sidestep most VPN overlap problems, should we establish any connections to other locations. At present, we are only using one subnet of this: 10.13.0.0/24.
This is the page that contains the only authoritative list of what the connections on the networking patch panel go to.
If you have something that needs to be attached to the network at i3Detroit, a static IP address can be assigned to it. This is useful in cases where something like a printer or a tool needs to be on the network with a known address that doesn't change.
Most member and guest laptops, however, do not need one of these.
If you have something that needs a fixed address but can't be configured for one (for some reason), something known as a DHCP reservation can be applied. Please contact Joe B to help you out with this.
If you can, please try to create a wiki page with information about the thing you just attached to the network, and link to that from the IP address listing here.
Static hosts use the following settings:
|IP address||Take an unused address from the table below. Document which address you used. When in doubt, ping first.|
|DNS domain name||i3detroit.local|
|Time / NTP server||10.13.0.1 (pfSense router) or 10.13.0.5 (The LAN switch is also an NTP server)|
IP Addresses in use
|10.13.0.1||pfsense||The firewall and dhcp server. Not a toy. Nicht für gefingerpöken||JCBender, Brad, Ted and others.|
|10.13.0.5||i3switch01||This is the Cisco 3750 Ethernet switch that drives i3! Not a toy. Nicht für gefingerpöken||JCBender|
|10.13.0.6||Cisco 1130 AP i3DetroitAP01||This is primary access point for i3Detroit. Not a toy. Nicht für gefingerpöken||JCBender|
|10.13.0.7||Cisco 1130 i3DetroitAP02||This is the office space access point for i3Detroit. Not a toy. Nicht für gefingerpöken||JCBender|
|10.13.0.9||Asterisk VM||We make phone calls with this. Nicht für gefingerpöken||JCBender|
|10.13.0.10||Wireless LAN Controller||We do nifty wireless things with this. Not a toy. Nicht für gefingerpöken||JCBender|
|10.13.0.11||Wireless LAN Controller IP #2 (required)||We do nifty wireless things with this. Not a toy. Nicht für gefingerpöken||JCBender|
|10.13.0.14||Cisco 1130 i3DetroitAP03||This is the back-of-shop access point for i3Detroit. Not a toy. Nicht für gefingerpöken||JCBender|
|10.13.0.20||Power Meter||Ethernet<->RS485 adapter for the power meter||Ted|
|10.13.0.22||mcclellan.i3detroit.local||MQTT/SpaceAPI VM||Andrew Meyer|
|10.13.0.35||fablab||The fablab host||Andrew Meyer|
|10.13.0.40||i3Switch02||i3 Second managed Ethernet switch in rack||JCBender|
|10.13.0.41||Full Spectrum 40W Laser Cutter||Andrew Meyer, Matt Gardeski|
|10.13.0.50||Large format printer||The HP DesignJet 300||i3, Nate B admin|
|10.13.0.51||HP LaserJet 700 m712 Printer||located in the Compute Zone|
|10.13.0.54||HP Color LaserJet 4650dn||Color Laserjet 4650dn printer in the Compute Zone||RogerS|
|10.13.0.83||CRTU-RU||Protocol Analyzer Radio Unit||Nate B|
|10.13.0.85||cyra||Turret laser system||Matthew Gardeski|
|10.13.0.91||Polycom-ATA||Cisco ATA-186 VOIP adapter for the Polycom conference phone. Nicht für gefingerpöken||JCBender|
|10.13.0.95||harrison.i3detroit.local||NTP stratum-1 server.||Andrew Meyer|
|10.13.0.100-245||DHCP RANGE||This is the DHCP range handed out by the firewall. Reservations possible|
The default DNS domain handed out for DHCP clients is i3detroit.local. If you have statically assigned a IP to something, and you want its hostname to be in DNS as your_hostname.i3detroit.local, we can add it to the local server. Post a request on the mailing list to have that taken care of.
Pages in category "Networking"
The following 16 pages are in this category, out of 16 total.