WelcomeSwitch

From i3Detroit
(Redirected from Twitterbot)
Jump to: navigation, search

I3TwitterBot is the replacement for this project

THIS CODE IS OBSOLETE, NEW SCRIPT IS RUNNING IN PYTHON. PENDING AN UPDATE HERE.


Wiring

On the camera, there's a hacked-up PoE cable that does the following:

1 wht/org ethernet
2 org/wht ethernet
3 wht/grn ethernet
4 blu/wht GND, also Digital Input -
5 wht/blu Digital Input +
6 grn/wht ethernet
7 wht/brn Relay Output
8 brn/wht +12V, also Relay Input

This allows the camera to be positioned away from the door by running a single cable. Without this, you'd need one for power, one for network, AND one for the I/O pins. Using a single 24ga wire for power is suboptimal, but the camera doesn't draw much power, and it hasn't been an issue yet.

In the box above the door: Ethernet pins pass through to Ethernet input (into which is plugged the feed from the back of the space.) GND from power input goes to GND from camera, also to LED cathode and SSR negative. +12 from power input goes to +12 from camera, also to switch contact. Relay Output from camera goes to LED anode and SSR positive. Digtal Input + from camera goes to switch contact. SSR isn't currently connected; signals are on orange wires, shrinkwrapped to prevent shorts in the time being.

(To accommodate a future local OPEN sign, provision has been made for connecting the big solid-state relay, which can switch anything we could throw at it.)

Software

The most important part of all this! Camera documentation: [1]


Proof-of-concept batch file:

:top
del getdi.cgi
wget --user=port --password=port http://i3detroit.dyndns.org:5000/cgi-bin/getdi.cgi
find "DI=L" <getdi.cgi
echo %errorlevel%
if %errorlevel% EQU 0 wget --user=port --password=port http://i3detroit.dyndns.org:5000/cgi-bin/setdo.cgi?do=l --output-document=NUL
rem This turns the LED off when the switch is down.
find "DI=H" <getdi.cgi
echo %errorlevel%
if %errorlevel% EQU 0 wget --user=port --password=port http://i3detroit.dyndns.org:5000/cgi-bin/setdo.cgi?do=h --output-document=NUL
rem This turns the LED on when the switch is up. 
sleep 1
goto top

Updated batch file, this is the one currently running on nate's desktop at home:

echo off
rem set currentstate=off
set camerahost=i3detroit.dyndns.org:5000
set camerauser=port
set camerapass=port
set twitteruser=contact@i3detroit.com
set twitterpass=redacted-from-wiki

:begin
del getdi.cgi
wget --user=%camerauser% --password=%camerapass% --timeout=5 --tries=2 http://%camerahost%/cgi-bin/getdi.cgi
find "DI=H" <getdi.cgi
echo %errorlevel%
if %errorlevel% EQU 0 goto itson
find "DI=L" <getdi.cgi
echo %errorlevel%
if %errorlevel% EQU 0 goto itsoff

:loop
sleep 10
goto begin

:itson
echo It's on!
wget --user=%camerauser% --password=%camerapass% --timeout=5 http://%camerahost%/cgi-bin/setdo.cgi?do=h --output-document=NUL
if "%currentstate%" EQU "on" goto loop
set currentstate=on
echo Switch set to ON state, %time% %date% >> log
rem wget --user=%twitteruser% --password=%twitterpass% --post-data="status=The space is OPEN FOR GUESTS as of %time%, please drop in!" http://twitter.com/statuses/update.xml --output-document=NUL
del video.jpg
wget --user=%camerauser% --password=%camerapass% --timeout=5 http://%camerahost%/cgi-bin/video.jpg
curl --form username=%twitteruser% --form password=%twitterpass% --form media=@video.jpg --form-string "message=The space is OPEN FOR GUESTS, and here's who flipped the switch! Drop in?" http://twitpic.com/api/uploadAndPost
goto loop

:itsoff
echo It's off!
if "%currentstate%" EQU "off" goto loop
set currentstate=off
echo Switch set to OFF state, %time% %date% >> log
wget --user=%twitteruser% --password=%twitterpass% --post-data="status=The space is closed as of %time% %date%" http://twitter.com/statuses/update.xml --output-document=NUL
wget --user=%camerauser% --password=%camerapass% --timeout=5 http://%camerahost%/cgi-bin/setdo.cgi?do=l --output-document=NUL
goto loop

WelcomeSwitch 1.4

Replacement perl script. Running on the pfsense box in the space. (OUTDATED, NEW SCRIPT BELOW)

#!/usr/bin/perl -w

my($camerauser, $camerapass, $twit_user, $twit_pass) = @ARGV;

my $tries = 2;
my $camerahost = 'xx.xx.xx.xx';
my $switchurl = "http://$camerauser:$camerapass@" . "$camerahost/cgi-bin/getdi.cgi";
my $pictureurl = "http://$camerauser:$camerapass@" . "$camerahost/cgi-bin/video.jpg";
my $twit_url = "http://twitpic.com/api/uploadAndPost";
my $status_filename = 'doorbot_status';

my $open_post_text = "message=The space is OPEN FOR GUESTS, and here's who flipped the switch! Drop in?";
my $close_post_text = "The space is closed as of";

my $old_switch_state = undef;


$SIG{'INT'} = \&quit;
$SIG{'QUIT'} = \&quit;

sub setOutput
{
        my($value) = @_;

        my $url = "http://$camerauser:$camerapass\@$camerahost/cgi-bin/setdo.cgi?do=$value";
        my $result = `wget -q --tries=$tries --output-document=setdo.html $url`;

        open(my $fh, '>', $status_filename) or return;
        my $status = ($value eq 'h') ? "open" : "closed";
        print $fh $status;
        close $fh;
}

while (1)
{
        $cameraresponse = `curl -s $switchurl`;
        chomp $cameraresponse;
        # print "camera response is: $cameraresponse\n";

        $cameraresponse =~ /DI=(.)/;
        $new_switch_state = $1;

        if($new_switch_state)
        {
                if(defined $old_switch_state and $new_switch_state eq $old_switch_state)
                {
                        #no change
                        next;
                }

                if($new_switch_state eq 'H')
                {
                        print "camera input is high\n";

                        #get the picture
                        my $picture_file_name = 'doorpicture.jpg';
                        `curl -s --output $picture_file_name $pictureurl`;

                        next if $?;

                        #make the twitter post
                        my $twit_post_command = sprintf 'curl -s --form "username=%s" --form "password=%s" --form "media=@%s" --form-string "%s" %s',
                                                         $twit_user, $twit_pass, $picture_file_name, $open_post_text, $twit_url;
                        #print "twit_post_command " . $twit_post_command . "\n" ;

                        #print "posting picture to twitter\n";
                        `$twit_post_command`;
                        next if $?;

                        unlink($picture_file_name);

                        setOutput('h');
                }
                elsif ($new_switch_state eq 'L')
                {
                        print "camera input is low\n";

                        my $timestamp = scalar(localtime);

                        #make the twitter post
                        my $twit_url = 'http://twitter.com/statuses/update.xml';
                        my $twit_post_command =  qq(wget -q --tries=$tries --user=$twit_user --password=$twit_pass --post-data="status=$close_post_text $timestamp" $twit_url --output-document=/dev/null);
                        #my $twit_post_command =  qq(curl -s --form "username=$twit_user" --form "password=$twit_pass" --form-string "status=$close_post_text $timestamp" $twit_url);
                        `$twit_post_command`;
                        next if $?;

                        setOutput('l');
                }

                $old_switch_state = $new_switch_state;
        }
        else
        {
                #camera input is unknown
        }
}
continue
{
        sleep 10;
}

&quit;


sub quit
{
        print "doorbot sez adios!\n";
        unlink($status_filename);
        exit;
}


Welcome Switch 1.7 *Current Build*

Running on the Debian box 10.13.0.15
Current Build: myselfbot.pl

To start script:
"/usr/bin/perl -w myselfbot.pl H &" Open
"/usr/bin/perl -w myselfbot.pl L &" Closed

Current Open status
H = Open
L = Closed

#!/usr/bin/perl -w


my($old_switch_state) = @ARGV;

#my($camerauser, $camerapass, $twit_user, $twit_pass) = ('port', 'port', 'Test2859258798', 'CONTACT-ADMIN');
my($camerauser, $camerapass, $twit_user, $twit_pass) = ('port', 'port', 'i3detroit', 'CONTACT-ADMIN');

my $tries = 2;
my $camerahost = '10.13.0.2';
my $switchurl = "http://$camerauser:$camerapass@" . "$camerahost/cgi-bin/getdi.cgi";
my $pictureurl = "http://$camerauser:$camerapass@" . "$camerahost/cgi-bin/video.jpg";
my $twit_url = "http://twitpic.com/api/uploadAndPost";
my $status_filename = 'doorbot_status';

my $open_post_text = "message=The space is OPEN FOR GUESTS, and here's who flipped the switch! Drop in?";
my $closed_post_text = "message=The space is CLOSED, please check back later!";


$SIG{'INT'} = \&quit;
$SIG{'QUIT'} = \&quit;

sub setOutput
{
	my($value) = @_;
        
	my $url = "http://$camerauser:$camerapass\@$camerahost/cgi-bin/setdo.cgi?do=$value";
	my $result = `wget -q --tries=$tries --output-document=/dev/null $url`;
	
	open(my $fh, '>', $status_filename) or return;
	my $status = ($value eq 'h') ? "open" : "closed";
	print $fh localtime() . ' ' . $status;
	close $fh;
}

while (1)
{
	$cameraresponse = `curl -s $switchurl`;
	chomp $cameraresponse;
	# print "camera response is: $cameraresponse\n";

	$cameraresponse =~ /DI=(.)/;
	$new_switch_state = $1;
	
	if($new_switch_state)
	{
		if(defined $old_switch_state and $new_switch_state eq $old_switch_state)
		{
			#no change
			next;
		}
		
		if($new_switch_state eq 'H')
		{
			print localtime() . " camera input is high\n";
			
			#get the picture
			my $picture_file_name = 'doorpicture.jpg';
			`curl -s --output $picture_file_name $pictureurl`;
			
			next if $?;

			#make the twitter post
			my $twit_post_command = sprintf 'curl -s --form "username=%s" --form "password=%s" --form "media=@%s" --form-string "%s" %s',
			                                 $twit_user, $twit_pass, $picture_file_name, $open_post_text, $twit_url;
			#print "twit_post_command " . $twit_post_command . "\n" ;
			
			#print "posting picture to twitter\n";
			`$twit_post_command`;
			next if $?;
			
			unlink($picture_file_name);
			
			setOutput('h');
		}
		elsif ($new_switch_state eq 'L')
		{
			print localtime() . " camera input is low\n";

			my $timestamp = scalar(localtime);
			
			my $picture_file_name2 = '/home/i3/doorbot/closed/riverview-sign-pool-closed-usg.jpg';
			#my $picture_file_name2 = '/home/i3/doorbot/closed.jpg';
			#make the twitter post
			my $twit_post_command2 = sprintf 'curl -s --form "username=%s" --form "password=%s" --form "media=@%s" --form-string "%s" %s',
			                                 $twit_user, $twit_pass, $picture_file_name2, $closed_post_text, $twit_url;
			#print "twit_post_command2 " . $twit_post_command2 . "\n" ;
			
			#print "posting picture to twitter\n";
			`$twit_post_command2`;
			

			#unlink($picture_file_name2);

			next if $?;
			
			setOutput('l');
		}
		
		$old_switch_state = $new_switch_state;
        sleep 10;
	}
	else
	{
		#camera input is unknown
	}
}
continue
{	
	sleep 2;
}

&quit;


sub quit
{
	print localtime() . " doorbot sez adios!\n";
	unlink($status_filename);
	exit;
}