Current items are in the old style, on https://www.i3detroit.org/wiki/Category:Welding_Area#Wishlist_and_Tasks
Could really use some help getting updated to the new style.....
General TODOs
| Task Name
|
Description
|
Priority
|
Champion
|
Equipment TODOs
| | TODO |
|---|
| Bench-Mounted Manual Metal Shear | Add a spring loaded hold down to the left (anvil) side |
| CNC Plasma Cutter |
- Install permanent air drop for the machine, check air humidity/oil/etc. (Complete)
- Install permanent power for the CNC side of the machine
- Clean out the water table (Complete 10/21/25. Alex Zurowski and Will Cunningham)
- Seal water table leaks (Complete 10/17/25. Alex Zurowski and Will Cunningham)
- Install limit switches (included with purchase, not currently installed)
- Develop class content for training (In Progress)
- Inventory consumables for the plasma cutter (Complete 10/21/25. Alex Zurowski and Will Cunningham)
- Determine per-minute rate for using the machine (Complete: $3/Quarter Hour)
- Put together instructions on swapping to the hand torch on the plasma cutter for hand work
- Create signs for Down/Training/Etc
- Email Plasma Green about water evaporation and refilling. (Complete 10/22 Will Cunningham)
|
| Hossfeld 2 Universal bender |
- Source more dies
- Add a good pic to this page
- Add the manual or a link to it
- Maybe find some good videos and link them
|
| Synchrowave 350 LX |
- Develop a better cable management system.
- Order more rods/cups/nozzles.
|
| Welding Table | Replace with a proper layout table and a flat welding table w/ threaded anchor holes. Maybe a downdraft table too. 4x8 for the layout table, a couple of 4x4 welding tables that can be clamped together, 3x4 for the downdraft, ideally 3 of them, each with their own set of practice welders. |
