Number Three

From i3Detroit
(Redirected from Powerwheels Car Number 3)
Jump to: navigation, search
CANNONBAAAAAAAAALL!!!!!

About

The venerable #3 car (also known as "Black Jeep") is the longest-competing vehicle in the Power Racing Series. It was designed for the first PPPRS competition at Maker Faire Detroit in 2011, and has competed there every year since. It was driven primarily by Karen "Cannonball" Corbeil, the mostest winningest driver the PPPRS has ever seen (3 seasons, 15 wins, 1 championship) until her retirement after the 2013 season. (See here for the tribute video from Jim). The #3 car continues into the 2014 season and beyond.

Car Build Info

  • Originally was a Power Wheels jeep, no longer in production (Still trying to find the model)
  • Motors: Two 1000-Watt electric scooter motors
  • Motor Controller: Curtis 1204 (Media:1204_(11C).pdf)
  • Power: Three 12v Batteries in series for 36v total.
  • Brakes: None (we're working on it)
Car 3 2014.jpeg

Makerfaire Participants

Number	First Name	Last Name	 
1	Terry	Wynn	
2	Jon	Anderson	
3	Gary	Morin	(Volunteer)
4	Max	Skelly-Gonyea Alexander	
5	Trish	Nguyen	(Volunteer 1/2 Day Sat)
6	Holly	Vollmar	
7	Ashley	Anderson (Volunteer)	
8	Cody	Collier
9       Troy    Wynn (Sunday Volunteer)
10      Ione    Walker 
11      Grant   Walker

Waitlist:

  • Zeddicus Ball 9
  • Ephraim Ball
  • Rowan Ball

Build Notes/Build Log

mounting motor and chain tension

one of the motors and the chain is adjusted. The other one is proving difficult. Their are no more washer to remove, to adjust the chain, I tried shorting the chain. When I did that, the motor would rub on the break disk. The chain might just be to worn. It might be best to just get a new one. we also need a new master link the one that is on there is missing a piece. Are there any ideas to fix this problem or should we just buy a new chain. --UnixMonky (talk) 18:47, 21 May 2014 (PDT)

Deadman's Switch

We need a Deadman's switch, so that the car is completely powered off and inoperable when no one is actively in control. I'm thinking that we should put some Anderson Powerpoles on the steering column right under the steering wheel (or on the steering wheel?), such that a matching set of wristband-mounted PowerPoles need to be connected to engage the controller (the controller has an on-off control separate from the power control). That way, when the driver's hand leaves the wheel, the car stops.

Emergency Stop

From the [PPPRS Rules] (as of 2014-05-21):

2.7.2 Kill Switch A Kill Switch system (a method to immediately cut power) must be incorporated in the vehicles. The kill switch MUST be easy to see and easily identifiable by track marshalls. We strongly suggest that teams have a huge, painfully obvious, big red button with massively bold letters clearly labeling the button as a Kill Switch. No power may flow through ANY electrical system on the vehicle when the Kill Switch is activated. NOTE: the Kill Switch must not be your “on” switch, nor can it be your throttle. Yes, you have to make a separate switch. No, it’s not too much to ask of you. Teams are permitted to seek any system necessary to achieve this, and it is up to the teams to implement it. A kill switch will not be part of the $500 budget and it would be really nice if teams that regulary exceed 10mph in a race spared no expense in developing and implementing one. PPPRS officials will request teams to prove that the system functions during the pre-race inspection.

So... yeah. we need this.

Current Build Task List

(as of 2018-07-01)

  • Body
    • Clean up
    • Mend cracks with glue and zip ties. Do some "drift stitching"
    • Re-paint
  • Rolling
    • Motor Tension - Does it go?
    • Steering Wheel - Does it steer ok?
    • Batteries - Charge/check capacity
    • Tires - Check over, are they fit to keep driving on
    • Throttle - Does it go and will it stop?
  • Brakes/Safety
    • Check Wiring:
      • eStop
      • Power On/Off
      • DeadMan's Switch
  • Upgrades
    • Re-mount controller, lower the seat

Succeeded By

Unlucky 13